© 2017 Johnson Controls, Inc.
Part No. 24-10737-121, Rev. A
Smart Building Hub
Smart Building Hub is a permanently mounted
pocket-sized web server that leverages the power of
mobile connectivity to maximize productivity for daily
operations.
• Commission, configure, and access building
automation equipment using Wi-Fi-enabled devices
such as smartphones, tablets, and laptops.
• Change and configure setpoints, parameters, and
schedules. View alarms and trends through an
HTML5 browser-based interface.
IMPORTANT: Keep your Smart Building Hub in the
protective shell or stationary cradle with which it
shipped. This may help protect the unit if it is
dropped.
IMPORTANT: Save this guide. It contains default
user name and password information that may be
needed to reset your Smart Building Hub to factory
defaults.
European Single Point of
Contact: NA/SA Single Point of Contact:
JOHNSON CONTROLS
WESTENDHOF 3
45143 ESSEN
GERMANY
JOHNSON CONTROLS
507 E MICHIGAN ST
MILWAUKEE WI 53202
USA
APAC Single Point of Contact:
JOHNSON CONTROLS
C/O CONTROLS PRODUCT MANAGEMENT
NO. 22 BLOCK D NEW DISTRICT
WUXI JIANGSU PROVINCE 214142
CHINA
QUICK START GUIDE
Smart Building Hub
d. Note the address in the IP Address field. By default,
the Smart Building Hub is configured to
dynamically receive an IP address from your
network using DHCP. If the IP address does not
appear, refresh the screen.
e. Enter this IP address in your browser address bar to
access the Smart Building Hub over an Ethernet
network.
Refer to the Smart Building Hub Network and IT
Guidance Technical Bulletin (LIT-12012324) for more
options.
Use the Smart Building Hub
Select a device from the equipment list and use
the web pages from the Smart Building Hub to
view, commission, and configure devices as needed.
