VERDER CARBOLITE GERO CFM 14/2 Handbuch

Installation, Operation and Maintenance Instructions

1400°C Combustion Tube Furnace - CFM Model:14/2

2416 Controller

CFM 14/2 + 2416 Controller

MEN-CFM1402-003_2416 (09-01-2019)

Contents

This manual is for guidance on the use of the Carbolite Gero product specified on the

front cover. This manual should be read thoroughly before unpacking and using the

furnace or oven. The model details and serial number are shown on the back of this

manual. Use the product for the purpose for which it is intended.

1.0 Symbols and Warnings 5

1.1 Switches and Lights 5

1.2 General Warnings 5

2.0 Installation 7

2.1 Unpacking and Handling 7

2.2 Siting and Setting Up 7

2.3 Heating Elements 8

2.4 Electrical Connections 9

3.0 2416 Controller 11

3.1 Description 11

3.2 Operation 13

3.3 Programming 15

3.3.1 Programming Tips 15

3.3.2 Multi-program model (2416P8) 16

3.3.3 Holdback 16

3.3.4 Program Cycling 16

3.3.5 Running a Program 16

3.3.6 Program example 17

3.4 Controller Options 18

3.4.1 Digital Communications - RS232 18

3.4.2 Digital Communications - RS485 18

3.4.3 Comms Address 18

3.4.4 Alarm Option 19

3.5 Temperature Controller Replacement 19

3.6 Navigation Diagram 20

4.0 2132 Over-Temperature Controller Description (if fitted) 21

4.1 Description 21

4.2 Operation 21

4.2.1 Controls 21

4.2.2 Operation 22

4.2.3 Over-Temperature Operation 22

4.2.4 Over-Temperature Alarm 22

4.2.5 Resetting the Over-Temperature Alarm 22

4.2.6 Sensor Break 22

4.3 Audible Alarm 23

4.4 Navigation Diagram 23

5.0 Operation 24

5.1 Operating Cycle 24

5.2 General Operating Advice 24

5.3 Tube Life 25

5.4 Operator Safety 25

5.5 Pressure 25

6.0 Maintenance 27

6.1 General Maintenance 27

6.2 Maintenance Schedule 27

6.2.1 Cleaning 29

6.3 Calibration 29

6.4 After-Sales Service 29

6.5 Recommended Spare Parts and Spare Parts Kit 29

6.6 Power Adjustment 29

6.7 Element Ageing 30

7.0 Repairs and Replacements 31

7.1 Safety Warning - Disconnection from Power Supply 31

7.2 Safety Warning - Refractory Fibre Insulation 31

7.3 Temperature Controller Replacement 31

7.4 Solid-State Relay Replacement 32

7.5 Thermocouple Replacement 32

7.6 Element Fitting and Replacement - 1400 °C Models 33

7.7 Fuse Replacement 34

8.0 Fault Analysis 35

A. Furnace Does Not Heat Up 35

B. Product Overheats 36

9.0 Wiring Diagrams 37

9.1 WA-11-10 37

9.2 WA-11-11 38

9.3 WA-11-30 39

10.0 Fuses and Power Settings 40

10.1 Fuses 40

10.2 Power Settings 40

User Power Setting Adjustments 41

11.0 Specifications 42

11.1 Environment 42

1.0 Symbols and Warnings

1.1 Switches and Lights

Instrument switch: when the instrument switch is operated the

temperature control circuit is energised.

Heat light: the adjacent light glows or flashes to indicate that power

is being supplied to the elements.

Heat switch: the switch disconnects power to the heating elements;

unless this switch is OFF there is a danger of electric shock when

inserting objects into the product.

1.2 General Warnings

DANGER – Electric shock. Read any warning printed next to this

symbol.

WARNING: Risk of fatal injury.

DANGER – Hot surface. Read any warning printed next to this

symbol.

WARNING: All surfaces of a product may be hot.

DANGER – Read any warning printed next to this symbol.

1.0 Symbols and Warnings

Caution – Double Pole/Neutral Fusing

2.0 Installation

2.1 Unpacking and Handling

When unpacking or moving the product always lift it by its base or by both ends of the

main body. Never lift it by its work tube or the surrounding insulation. Use two or more

people to carry the product and control box. Remove any packing material from inside

the product before use.

If an optional or special stand is separately supplied, assemble the product on to it.

Some models may be supplied for customer mounting and may require customer

preparation of mounting components before installation.

NOTE: This product contains Refractory Ceramic Fibre (also known as

Alumino Silicate Wool - ASW). For precautions and advice on handling

this material see section 7.2.

2.2 Siting and Setting Up

Place the product on a level surface in a well ventilated area.

Site away from other sources of heat and on a non-flammable surface that is resistant

to accidental spillage or hot materials.

The surface on which the equipment is mounted should be stable and not subject to

movement or vibrations.

The height of the mounting surface is important to avoid operator strain when loading

and unloading samples.

Unless otherwise stated elsewhere in this manual, ensure that there is at least 150

mm of free space around the back and sides of the product. Clear space is required

above the product to dissipate heat.

Work tubes:

It is recommended that the work tube has either insulation plugs or

radiation shields fitted to minimise heat loss from both ends of the work

tube. If the work tube has open ends, a significant amount of energy

could be radiated from the ends of the work tube. Adjacent surfaces

should always be made from a non-flammable material.

Ensure that the ends of the work tube are positioned at least 500 mm

away from any adjacent surface so that any energy radiated cannot heat

an adjacent surface to a dangerous temperature.

2.0 Installation

Ensure that the product is placed in such a way that it can be quickly switched off or

disconnected from the electrical supply.

The product is typically used for sulphur and chlorine test in accordance with BS1016

parts 6 & 7, ASTM D 3177-75; ISO 351 & 609.

Please refer to the appropriate documentation.

This manual only gives general guidance common to tube products.

Fit any work tube(s) ordered into place. If a metal work tube is being used in the

product, ensure that it is earthed and that it is mounted so as not to touch the products

ceramic tube or insulation.

Under no circumstances should any objects be placed on top of the product.

Always ensure that any vents on the top of the product are clear of any

obstruction. Always ensure all cooling vents and cooling fans (if fitted) are

clear of any obstruction.

2.3 Heating Elements

The silicon carbide elements are VERY FRAGILE and are packed separately. Fit them

accordingly to the instructions in section 7.0 for element fitting and replacement

instructions.

2.4 Electrical Connections

Connection by a qualified electrician is recommended.

This product requires a single-phase A.C. supply with earth (ground), which may be Live

to Neutral non-reversible (polarised), Live to Neutral reversible (non-polarised), or Live

to Live.

Check the product rating label before connection. The supply voltage should agree with

the voltage on the label and the supply capacity should be sufficient for the current on

the label.

The supply should be fused at the next size equal to, or higher than the current on the

label. A table of the most common fuse ratings is also given towards the back of this

manual. When the mains cable is factory fitted, internal fuses are also fitted. It is

essential that the operator ensures that the product is correctly fused.

Products with a factory fitted supply cable are designed to be wired directly to an

isolator or fitted with a line plug.

Products without a factory fitted supply cable require a permanent connection to a

fused and isolated supply. The product's electrical access panel should be temporarily

removed, and connections made to the internal terminals.

If the product is to be connected by line plug. The plug should be within reach of the

operator and should be easy to remove.

When connecting the product to an isolating switch ensure that both conductors (single

phase) or on all live conductors (three phase), and should be within reach of the

operator.

The supply MUST incorporate an earth (ground).

Supply Terminal Label Cable Colour

Supply Types

Live - Neutral Reversible or Live-

Live

1-phase L Brown to live

to either power

conductor

(For USA 200-240V,

connect L1)

N Blue to neutral

to the other power

conductor

(For USA 200-240V,

connect L2)

PE Green/ Yellow to earth

(ground) to earth (ground)

Electrical Connection Details:

Technical Notes

2.0 Installation

This model has an electronically controlled power limit. Do not attempt to calculate the

Amps from the Wattage. High break capacity fuses should be used. Avoid fast-blow

fuses and magnetic trip circuit breakers - consult Carbolite Gero if in doubt.

Andere Handbücher für CARBOLITE GERO CFM 14/2

Inhaltsverzeichnis

Andere VERDER Ofen Handbücher

VERDER

VERDER CARBOLITE GERO VCF 12/100 Handbuch

VERDER

VERDER CARBOLITE GERO SNF Handbuch

VERDER

VERDER CARBOLITE GERO RHF 16/8 Handbuch

VERDER

VERDER Carbolite Gero RWF 11/13 Handbuch

VERDER

VERDER CARBOLITE GERO G Series Handbuch

VERDER

VERDER CARBOLITE GERO HST 12/600 Handbuch

VERDER

VERDER Carbolite Gero SCF 24 Handbuch

VERDER

VERDER CARBOLITE GERO G Series Handbuch

VERDER

VERDER CARBOLITE GERO VST 12/200 Handbuch

VERDER

VERDER CARBOLITE GERO HTF 18/15 Handbuch

VERDER

VERDER TZF 12/65/550 Handbuch

VERDER

VERDER CARBOLITE GERO CFM 14/1 Handbuch

VERDER

VERDER CARBOLITE GERO BLF 18/3 + No Controller Handbuch

VERDER

VERDER Carbolite Gero RHF 15/3 Handbuch

VERDER

VERDER Carbolite Gero CWF 11 Handbuch

VERDER

VERDER TZF 12/65/550 Handbuch

VERDER

VERDER CARBOLITE GERO CWF-BAL 11/21 Handbuch

VERDER

VERDER HZS 12/900 Handbuch

VERDER

VERDER CARBOLITE GERO HRF 7/324 Handbuch

VERDER

VERDER TZF 12/75/700 Handbuch

VERDER

VERDER CARBOLITE GERO CFM 14/2 AUX Handbuch

VERDER

VERDER Carbolite Gero AAF 11/18 Handbuch

VERDER

VERDER CARBOLITE GERO G Series Handbuch

VERDER

VERDER CARBOLITE GERO VMF-ASTM Handbuch

Beliebte Ofen Handbücher anderer Marken

Armstrong

Armstrong EG7H SERIES Bedienungsanleitung

Payne

Payne PG92ESA Leitfaden

SUPREME

SUPREME FEM10-M2301CM-A Montageanleitung

Ingersoll-Rand

Ingersoll-Rand S9V2B080D4VSAC/D Montageanleitung

Johnson Controls

Johnson Controls TM9T Leitfaden

Fluke

Fluke 9118A Bedienungsanleitung

Lennox

Lennox EL195UHE Elite Series Installations- und Betriebshandbuch

Intertherm

Intertherm M7RL Series Bedienungsanleitung

HDG

HDG Pelletmaster 15 Bedienungsanleitung

Pinnacle

Pinnacle Aero Bella AB-716C-QH Handbuch

Nortek

Nortek MG2S Series Bedienungsanleitung

Goodman

Goodman GMV9 Handbuch

SUPREME

SUPREME SUP10-M2301C Montageanleitung

Dettson

Dettson AMT400B34-SM1PMA Montageanleitung

Evcon

Evcon DGD 60 MBH Bedienungsanleitung

Trane

Trane S8B1A026M2PSAB Montageanleitung

Hart Sceintific

Hart Sceintific 9113 Bedienungsanleitung

Whirlpool

Whirlpool Gold WGGE45 Bedienungsanleitung