versa VX-583WR Bedienungsanleitung
V5.1
Router User Manual
VX-583WR ADSL Wireless N
VX‐582WR UserManual
NOTICE
and all the accompanying hardware, software, and documentation are copyrighted. All
rights are reserved. No part of this document may be photocopied or reproduced by
mechanical, electronic, or other means in any form.
The manufacturer does not warrant that the hardware will work properly in all
environments and applications, and makes no warranty or representation, either
expressed or implied, with respect to the quality, performance, merchantability, or
fitness for a particular purpose of the software or documentation. The manufacturer
reserves the right to make changes to the hardware, software, and documentation
without obligation to notify any person or organization of the revision or change.
All brand and product names are the trademarks of their respective owners.
© Copyright 2012 Versa Technology, Inc.
All rights reserved.
This document contains proprietary information protected by copyright, and this Manual
VX‐582WR UserManual
1
Content
1 OVERVIEW................................................................................................................................2
1.1FEATURES.................................................................................................................................2
1.2PACKET CONTENTS..................................................................................................................4
1.3SYSTEM REQUIREMENTS..........................................................................................................5
1.4FACTORY DEFAULTS.................................................................................................................5
1.5WARNINGS AND CAUTIONS.......................................................................................................5
2 HARDWARE DESCRIPTION....................................................................................................6
3 HARDWARE INSTALLATION..................................................................................................8
4 PC CONFIGURATION GUIDE..................................................................................................9
4.1 LOCAL PC CONFIGURATION IN WINDOWS 95, 98, ME, XP.....................................................9
4.2 LOCAL PC CONFIGURATION IN WINDOWS 2000......................................................................9
5 WEB-BASED MANAGEMENT GUIDE...................................................................................10
5.1LAN SETTING PAGE................................................................................................................10
5.2INTERNET ACCESS CONFIGURATION......................................................................................10
5.3WIRELESS SETTING.................................................................................................................22
5.4MANAGEMENT.........................................................................................................................29
APPENDIX: FREQUENTLY ASKED QUESTIONS....................................................................32
VX‐582WR UserManual
2
1 Overview
Thank you for choosing our product. The VX-583WR ADSL wireless N router
unit, bringing high-speed wireless Internet connection to a home or office.
1.1 Features
1.1.1 Data rate
zDownstream data rate up to 24Mbps,
zUpstream data rate up to 1Mbps
1.1.2 ADSL Compliant
zITU G.992.1 (G.DMT)
zITU G.992.2 (G.Lite)
zITU G.994.1 (G.hs)
zITU G.992.3 (G.DMT.BIS)
zITU G.992.4 (G.lite.bis)
zITU G.992.5
zCompatible with all T1.413 issue 2 (full rate DMT over analog
POTS), and CO DSLAM equipment
1.1.3 Wireless
zFully IEEE 802.11b & IEEE 802.11g compatible.
zIEEE 802.11n draft compatible
zWireless data rate up to 300Mbps
zOperating in the unlicensed 2.4 GHz ISM band
zMulti-SSID
zSupports 64/128 bits WEP security and user authentication
1.1.4 Network Protocol & Features
zEthernet to ADSL Self-Learning Transparent Bridging
zInternet Control Message Protocol (ICMP)
is a ADSL modem, a 802.11n wireless router and a 4-port switch in one
VX‐582WR UserManual
3
zIP Static Routing
zRouting Information Protocol (RIP, RIPv2)
zNetwork Address Translation (NAT)
zVirtual Server, Port Forwarding
zDynamic Host Configuration Protocol (DHCP)
zDNS Relay, DDNS
zIGMP Proxy
zSimple Network Time Protocol (SNTP)
zVPN pass-through (IPSec/PPTP/L2TP)
zParent control
1.1.5 ATM Capabilities
zRFC 1483 Multi-protocol over ATM “Bridged Ethernet” compliant
zRFC 2364 PPP over ATM compliant
zRFC 2516 PPP over Ethernet compliant
zATM Forum UNI3.1/4.0 PVC - Up to 16 PVCs
zVPI Range: 0-255
zVCI Range: 32-65535
zUNI 3.0 & 3.1 Signaling
zATM AAL5 (Adaption Layer type 5)
zOAM F4/F5
1.1.6 FIREWALL
zBuilt-in NAT
zMAC Filtering
zPacket Filtering
zStateful Packet Inspection (SPI)
zDenial of Service Prevention (DoS)
VX‐582WR UserManual
4
zDMZ
1.1.7 Management Support
zWeb Based GUI
zUpgrade or update via FTP/HTTP
zCommand Line Interface via Telnet
zDiagnostic Test
zFirmware upgradeable for future feature enhancement
1.1.8 Operating System Support
zWINDOWS 98/98 SE/ME/2000/XP/VISTA/7
zMacintosh
zLINUX
1.1.9 Environmental
zOperating humidity: 10%-90% non-condensing
zNon-operating storage humidity: 5%-95% non-condensing
1.2 Packet Contents
The packet contents are as the following:
zADSL ROUTER x 1
zExternal Splitter x 1
zPower Adapter x 1
zTelephone Line x 1
zEthernet Cable x 1
zAntenna x 2
zBase x1
VX‐582WR UserManual
5
1.3 System Requirements
Before using the VX-583WR ADSL wireless N router, verify that you meet
the following requirements:
zSubscription for ADSL service. Your ADSL service provider should
provide you with at least one valid IP address (static assignment or
dynamic assignment via dial-up connection).
zOne or more computers, each contains an Ethernet 10/100M Base-T
network interface card (NIC).
zA hub or switch, if you are connecting the device to more than one
network device.
zFor system configuration using the supplied web-based program: A web
browser such as Internet Explorer v5.0 or later, or Netscape v4.7 or
later.
1.4 Factory Defaults
The device is configured with the following factory defaults:
zIP Address: 192.168.1.1
zSubnet Mask: 255.255.255.0
zSSID: WLAN
zEncapsulation: LLC/ SNAP-Bridging
zVPI/VCI: 0/35
1.5 Warnings and Cautions
zNever install telephone wiring during storm. Avoid using a telephone
during an electrical storm. There might be a risk of electric shock from
lightning.
zDo not install telephone jacks in wet locations and never use the product
near water.
zTo prevent dangerous overloading of the power circuit, be careful about
guideline could result in a dangerous situation.
zPlease note that telephone line on modem must adopt the primary line
that directly outputs from junction box. Do not connect the VX-583WR
ADSL wireless N router to extension phone. In addition, if your house
developer divides a telephone line to multi sockets inside the wall of
house, please only use the telephone that has connected with the splitter
of ADSL Router when you access the Internet.
the designed maximum power load ratings. Failure to follow the rating
VX‐582WR UserManual
6
2 Hardware Description
Front Panel
LED Color Function
PWR
Solid
Green Power on
Off Power off
LAN1,2,3,4 Green
On: LAN link established and active via LAN
port
Blinking: DSL data activity occurs.
Off: No LAN link via LAN port
WLAN Green
On: The wireless module is ready and idle.
Blinking: Data transmitting or receiving over
WLAN
Off: The wireless function is off
DSL Green
On: DSL link established and active
Quick Blinking: DSL is trying to establish a
connection
Slow Blinking: No DSL link
INET
Solid
Green IP connected
Off Modem power off, modem in bridged mode or
ADSL connection not present
Flickering
Green IP connected and IP Traffic is passing thru the
device
VX‐582WR UserManual
7
Rear panel
Side panel
WIFI button: Enable or disable wireless function.
Reset button: System reset or reset to factory defaults.
WPS button: A convenient way for WPS set.
Port Function
DSL Connect the device to an ADSL telephone jack or splitter
using a RJ-11 telephone cable
LAN1,2,3,4 Connect the device to your PC's Ethernet port, or to the
uplink port on your hub/switch, using a RJ-45 cable
ON/OFF Switch it on or off
POWER Connect to the supplied power adapter
VX‐582WR UserManual
8
3 Hardware Installation
This chapter shows you how to connect the VX-583WR ADSL wireless N router
and the appropriate environment for the VX-583WR ADSL wireless N router
installation.
1. Using a telephone line to connect the DSL port of THE VX-583WR ADSL
WIRELESS N ROUTER to the MODEM port of the splitter, and using a
other telephone line connect your telephone to the PHONE port of the
splitter, then connect the wall phone jack to the LINE port of the splitter.
The splitter comes with three connectors as below:
LINE: Connects to a wall phone jack (RJ-11 jack)
MODEM: Connects to the DSL jack of the VX-583WR ADSL wireless N
router
PHONE: Connects to a telephone set
2. Using an Ethernet Cable to connect the LAN port of the VX-583WR ADSL
wireless N router to your LAN or a PC with network card installed.
3. Connect the power cable to the PWR connector on the VX-583WR ADSL
wireless N router, then plug in the AC power adapter to the AC power outlet,
and then press the on-off button.
Notes: Without the splitter and certain situation, transient noise from
telephone can interfere with the operation of the VX-583WR ADSL
wireless N router, and may introduce noise to the telephone line.
To prevent this from happening, a small external splitter must be
connected to each telephone.
Inhaltsverzeichnis
Andere versa Netzwerk-Router Handbücher
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise