Vertex Standard EVX-Link Bedienungsanleitung
CLICK TO EDIT
CLICK TO
E
E
D
D
I
I
T
C
LI
C
K
T
O
E
E
E
D
D
D
D
D
I
I
T
T
T
T
T
T
Vertex Standard
EVX-LinkTraining
EVX-LinkTraining
What is the EVX-Link
EVX-Link is a fast and easy way to connect multiple DMR
digital coverage areas regardless of geography.
This system provides a seamless and reliable connection via
the use of an existing Local Area Network (LAN) or
internet. It works with or without a repeater infrastructure
which offers great flexibility.
EVX-Link can be used with existing systems or can replace
the functionality of legacy high power repeater equipment.
EVX-LinkTraining
Installation
Connection
CAT-7 Cable to be used
in CE Countries
PUBLIC (WAN)
Static IP Address
aaa.bbb.xxx.yyy
Private Static IP Address
192.168.xxx.yyy
Router NAPT to be set such that
UDP messages with Port Address
21000 will be routed to EVX Link
EVX-LinkTraining
Installation
Connection
Private Static
IP Address
192.168.xxx.yyz
Private Static
IP Address
192.168.xxx.yyy
Radio Setup
Radio Firmware Update
Use the FW6 software to update radio firmware to Ver 01.22.01.12-3
1. Un Zip the EVX-5300_Firmware_V01_22_01_12-3(Package) .zip file
2. Power on the radio and connect to PC via FIF-12
3. Double click FW6 to update the radio firmware
4. Click WRITE to update firmware
Select COM Port (FIF-12)
accordingly
EVX-LinkTraining
Radio Setup
Program the Radio by using CE142 (Ver 1.14 or later).
User only needs to setup the following two items.
1. Activate EVX-Link mode
Select [Common] > [Miscellaneous] > [Misc 1] tab
Select EVX-Link mode to enable
This tab only appears after firmware is updated
2. Setup mobile frequency
Color code,TX Power
The EVX-mobile does not require other settings to be programmed in EVX-Link mode.
The EVX-Link only operates in Digital mode.
EVX-LinkTraining
EVX-Link Box Setup
2. USB Setup
Need to connect the EVX-Link box to a powered EVX-mobile radio to program.
1. Setup USB Driver for EVX-Link box by using
EVX-Link_Driver _Setup software
2. Connect EVX-Link via USB
3. Check the Device Manager
The COM # will be different
EVX-LinkTraining
EVX-LinkTraining
Connection
EVX-Link Box Setup
EVX-Link Beta test Setup
EVX-Link Box Setup
Double click “EVX-LinkSetup”
to execute the programming
software.
If “User account control” box
appears, press “Yes” box to
continue.
EVX-Link Beta test Setup
EVX-Link Box Setup
When using a router, the network address and port translation (NAPT) is necessary. The
following UDP (user datagram protocol) port must be connectable: 21000.
The DMZ feature is easy to setup above requirement and most of the routers have this
feature.
EVX-Link Beta test Setup
EVX-Link Box Setup
1. Local IP address setup
Program your local IP address (EVX-Link IP)
Program Subnet Mask
Program Gateway Address
IP Address, Subnet Mask and Gateway Address settings are depending on your local area
network settings. Please check your IT dept how to setup those numbers.
EVX-Link Beta test Setup
EVX-Link Box Setup
•Check your Local IP address using Command Prompt window and type ipconfig
EVX-Link Beta test Setup
EVX-Link Box Setup
2. Target IP address setup (up to 32)
Program target IP address
Check the target box
You can add the alias to each address
Alias box
Address box
EVX-Link only send the
data to checked address
EVX-Link Box Setup
3. Click Write To EVX-Link box to
write setup data to EVX-Link
4. Click Save Setup File box to backup
your setup data to PC
EVX-LinkTraining
EVX-Link Box Setup
Example setting for 9 sites on same network
Remove check mark
from same IP address
to avoid address
conflict !
This setup means
Site 192.168.0.1
sends
to sites 2 to 9
EVX-LinkTraining
EVX-Link
Thank you
EVX-LinkTraining
Inhaltsverzeichnis
Andere Vertex Standard Netzwerk-Hardware Handbücher
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
