VES, LLC
eView Installation Manual VF3510-00, Revision E01.06
Revision History
Revision Date Status Description
E01.00 08/26/2008 Initial release Modify original from parent company.
E01.01 09/08/2008 internal edits Added part number to manual. Change name of remote annunciator from “VES Information
Display” to “eView””. Change contact information from “Central Time” to “Eastern Standard
Time”. Global change of eLITE to Elite Panel. Remove reference to eView without a control
keyswitch. Remove reference to items included with the eView packaging. Global change
from DIL to DIP. Add US units of measurement to metric. Add reference for configuring with
Loop Explorer and eSP Discovery. Change from Syncro and Syncro AS to eLAN and Elite.
Update VES part numbering. Increased font-size of title and centered image on front-cover.
E01.02 09/16/2008 Internal edits Added RMA and warranty return process in Introduction, Section 1. Added “location security”
to step one of “To complete the installation:”, Installation, Section 3. Identify correct values for
Specifications, Appendix A. Added step#2 to Installation, Section 3, “Remove AC and battery
power to the eLAN or Elite Panel”.
E01.03 11/20/2008 Content changes
under UL project
08CA27859.
Removed VESNet, eNET and firmware reference from first paragraph of Section 2,
Overview. Re-drafted this paragraph to include reference to the buzzer annunciation and
silence, the front-panel controls, the use of level 2 and the RS485 connection. Added low
temperature, high temperature and relative humidity to the Operating Environment section of
Appendix A, Specifications.
Changed document revision on all footers from E01.02 to E01.03.
E01.04 01/14/2009 Content changes
under UL project
08CA27859.
Added maximum input rating of 24 VDC @ 110 mA to Appendix A, Specifications, Electrical.
Changed the range of wire sizes from “18 through 24 AWG” to “14 through 24 AWG” on page
10 of 16 in Section 3, Installation, Before You Begin. This change was performed to be
consistent with terminal block information provided in Appendix A, Specifications Electrical.
Replaced VES logo header on cover. Corrected header spacing. Removed page count from
back cover. Page count changed from 17 to 16. Changed inconsistent header spacing to
consistent spacing throughout document. Corrected spelling.
Changed the document revision on all footers from E01.03 to E01.04.
E01.06 02/05/2009 Non-content
changes
Updated photo on front cover and in Section 1, Introduction. Changed dimensions from
metric to US standard in Section 3, Installation, Mounting. Replaced VES logo on legal page.
E01.06 10/16/2009 Non-content
changes
Added RS panel illustration to Section 3, Installation.
