VEVOR S2TL-3500 Bedienungsanleitung
Technical Support and E-Warranty Certificate https://www.vevor.com/support
WATER CHILLER
USER MANUAL
MODEL: S2TL-3500
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
S2TL-3500
<Picture Only For Reference >
Have product questions? Need technical support? Please feel free to
contact us:
CustomerService@vevor.com
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Coffee Grinder
S2TL-3500
- 2 -
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE EQUIPMENT
AND KEEP IT FOR FURTHER REFERENCE
Contents
Ⅰ. SAFETY PRECAUTIONS
Ⅱ. PRODUCT DESCRIPTION
Ⅲ. DIMENSION
Ⅳ. INSTALLATION
Ⅴ. HOW TO USE
Ⅵ. MAINTENANCE
Ⅶ. CIRCUIT DIAGRAM
Ⅷ. TROUBLE-SHOOTING
Ⅰ. SAFETY PRECAUTIONS
WARNING ：Read all safety warnings, instructions, illustrations and specifications
provided with this electric appliance. Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
IMPORTANT!
1, Type Y attachment: If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a
- 3 -
hazard.
2, This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not be made by children
without supervision.
3, FCC Declaration: This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1)This device may not cause harmful
interference, and (2)this device must accept any interference received, including
interference that may cause undesired operation.
4, Stand the chiller upright and allow the refrigerant to settle for 30 minutes before
the initial start!
- 4 -
Ⅱ. PRODUCT DESCRIPTION
INTRODUCTION:
Many thanks for choosing the VEVOR water chiller. This product is with the following
features.
1）High quality compressor with excellent durability, enerygy efficiency and low noise.
2）Finned condenser produced under strict quality control.
3）Radiator made with quality aluminum and coated with anti-corrosive paint.
4）High-quality and anti-corrosive industrial heat exchanger made of pure titanium, suitable
for fresh and marine water, as well as mild acid and alkaline solution.
5）This machine is controlled by microcomputer, easily operated with control panel.
- 5 -
The chillers are widely used for water temperature adjustment in hotel, restaurant, fish farm,
seafood market etc.
TECHNICAL PARAMETER
MODEL
S2TL-3500
POWER
1/3HP
VOLT. & FREQ.
115V/60HZ
COOLANT
R410A
PUMP OUTFLOW
≥6000L/H
REFRIGERATING CAPACITY
3500W
RECOMMENDED TANK SIZE
≤2280L（600gal）
WEIGHT (KG)
37.4
SIZE(MM)
930*280*550
CARTON DIMENSION(MM)
1137*490*690
How to select the right chiller?
1.Determine the water volume of your aquarium or seafood tank (for recommended water
volumes, see “RECOMMENDED TANK SIZE” for reference).
2.If the ambient air temperature is 89.6°F (32℃) and you expect to cool the water no lower
than 71.6°F (22℃), choose a chiller based on the MAXIMUM water volume.
3.If you expect to cool the water to the temperature between 71.6°F(22℃) - 60.8°F(16℃),
choose a chiller based on the MINIMUM water volume.
4.If you expect to cool the water no higher than 60.8°F(16℃), you may consider a higher
power chiller, or reduce the water volume.
5.Please note that other factors such as room ventilation, aquarium/tank structure, water
flow rate, lighting system, surrounding heat sources etc., will also affect water chilling
efficiency.
The below performance curves are for the user’s reference in choosing the right chiller.
- 6 -
PERFROMANCE CURVES
S2TL-3500
Temperature ℉
Work time
(Min=Minute, H=Hour)
NOTES:
1.Refrigerating effect will be impacted by ambient temperature, water circulation flow rate,
installation position, lighting system, surrounding heat sources, room ventilation,
aquarium/reservoir structure, etc. To get the best use of this machine, please strictly follow
this instruction manual.
2.Recommended water volume is closely related to the ambient temperature and the
required water temperature. When ambient temperature is high (and a low water
temperature is required) the water volume should be REDUCED to achieve best
performance.
Ⅲ. DIMENSION
- 7 -
Product Dimension
MODEL
L(mm)
W(mm)
H(mm)
CL-600
930
280
550
Ⅳ. INSTALLATION
The installation of the chiller should comply with the safety precautions and warnings.
The unit must be used with a circulating system and a filtering system.
Installation method:
Aquarium/tank -- filtering system/filter -- water pump -- inlet of chiller -- outlet of chiller --
aquarium/tank.
- 8 -
1.The product has two fittings on one side for tubing connections, with the bottom one for
inlet and the top for outlet. Connections of the aquarium/tank and water pump can be made
with either soft or hard tubing (hard tubing is better for high water flow). For the tubing
diameter please refer to the diameter of the connector supplied. After tubing is connected,
please make sure there are no kinks, tangles or items on tubing as this may block the water
flow.
2.Position the outlet tube going to the aquarium/tank slightly above the water lever and
secure in place. Position the inlet tube 5cm~10cm above the bottom of aquarium/ tank.
Make sure that the inlet and outlet are positioned at opposite sides of the aquarium/tank.
When applied to multi-layer of seafood tank, the outlet tube should be positioned above the
top layer, allowing the water to trickle down. At the bottom layer, the water pump firstly
pumps the water into filter then into the chiller unit.
3.The chiller unit must be installed in a condition with good ventilation. Keep the clearance
of at least 30cm for the back (air inlet) and two sides and at least 60cm for the front (air
outlet). See the Fig.1. More clearance should be provided when the machine works in high
power. Otherwise, the cooling efficiency will be reduced or even cause malfunction.
Fig. 1
Attention: Check the chiller inlet and outlet carefully, DO NOT MISCONNECT.
Ⅴ. HOW TO USE
- 9 -
Before using the machine, please check:
(1)Power cord is securely plugged into a grounded, correctly rated outlet. Make sure the
power voltage and frequency are in accordance with the data specified on the nameplate
or in the instruction manual.
(2)The fittings and joints are correctly and tightly fitted and there are no leaks.
(3)The tubing and connections are all clean, no kinks, tangles or clogs.
(4)Keep sufficient clearance between the chiller and its surrounding objects for heat
dissipation and convenient maintenance, with at least 30cm clearance around back (air
inlet) and sides and 60cm in front (air outlet). If the chiller is to be put in an aquarium
cabinet, the cabinet should have enough grilles for air circulation, or to be equipped with an
extra small exhaust fan.
If the 4 items above are OK, you may begin using your water chiller:
(1)Turn on water pump, making sure the Circulating Cooling Water System can run
normally without any blockage or leak.
(2)Turn on the chiller and use the Control Panel to set desired water temperature.
How it works?
The machine is operated by the microcomputer with functions such as temperature control,
delayed protection, over current protection, and blackout memory.
Once you set up a temperature (required water temperature), the microcomputer controller
will choose cooling mode according to the difference between the actual water temperature
and the setup temperature, and automatically turn on the machine.
When actual water temp ≥ setup temp + tolerance temp, cooling mode will be on. When the
actual water temp reaches the setup temp, machine will be off. The water temp stays at
pre-set temperature with a tolerance of 2℉. In the event of a power outage, the chiller will
automatically restart when power comes back on.
Adjust temperature
1.Press “SET” to enter setting, the control panel displays pre-set temperature.
2.Press ▲ to turn up pre-set temperature, and press ▼ to turn down pre-set temperature.
3.Stop pressing any key for 10 seconds, digital control panel will exit to temperature display,
and the setting takes effect. The green indicator blinks in “delayed start” state, after a 3
minutes’ delay, the chiller starts chilling automatically.
Inhaltsverzeichnis
Andere VEVOR Kühler Handbücher
