VIA Technologies ARTiGO A935 Bedienungsanleitung
QUICK START GUIDE
VIA ARTiGO A935
Android 10.0 EVK
1.00-21032023
Copyright
Copyright © 2023 VIA Technologies Incorporated. All rights reserved.
No part of this document may be reproduced, transmied, transcribed, stored in a retrieval system, or translated into any language, in any
form or by any means, electronic, mechanical, magnec, opcal, chemical, manual or otherwise without the prior wrien permission of
VIA Technologies, Incorporated.
Trademarks
All brands, product names, company names, trademarks and service marks are the property of their respecve holders.
Disclaimer
VIA Technologies makes no warranes, implied or otherwise, in regard to this document and to the products described in this document.
The informaon provided in this document is believed to be accurate and reliable as of the publicaon date of this document. However,
VIA Technologies assumes no responsibility for the use or misuse of the informaon (including use or connecon of extra device/
equipment/add-on card) in this document and for any patent infringements that may arise from the use of this document. The informaon
and product specicaons within this document are subject to change at any me, without noce and without obligaon to nofy any
person of such change.
VIA Technologies, Inc. reserves the right the make changes to the products described in this manual at any me without prior noce.
ii
iii
VIA ARTiGO A935 Android 10.0 EVK Quick Start Guide
Revision History
Version Date Remarks
1.00 21/03/2023 Inial release
iv
VIA ARTiGO A935 Android 10.0 EVK Quick Start Guide
Table of Contents
1. Introducon.................................................................................................................................................... 1
1.1 EVK Package Contents........................................................................................................................... 1
1.1.1 Firmware Folder Contents ............................................................................................................. 1
1.1.2 Document Folder Contents............................................................................................................ 1
1.1.3 Tool Folder Contents...................................................................................................................... 1
1.2 Version Informaon and Supported Features....................................................................................... 2
2. Image Installaon .......................................................................................................................................... 3
2.1 Installing with the Fastboot Mode........................................................................................................ 3
3. Hardware Funcons ....................................................................................................................................... 6
3.1 Enabling ADB Debugging ...................................................................................................................... 6
3.2 Changing the Kernel Debug Level ......................................................................................................... 6
3.3 Checking the BSP Version...................................................................................................................... 6
3.4 DVFS...................................................................................................................................................... 7
3.5 MTK NeuroPilot AI APU Hardware Acceleraon ................................................................................... 8
1
VIA ARTiGO A935 Android 10.0 EVK Quick Start Guide
1. Introducon
This Quick Start Guide provides an overview of how to boot the Android image for the VIA ARTiGO A935 and
congure the supported hardware funcons in the build.
The VIA ARTiGO A935 Android 10.0 EVK is developed based on the MediaTek Android 10.0 BSP, and it enables
the hardware features of the VIA ARTiGO A935.
1.1 EVK Package Contents
There are three folders in the package listed as below.
Firmware folder Descripon
VIA_ARTiGO_A935_Android_10.0_EVK.zip Android evaluaon image
Document folder Descripon
VIA_ARTiGO_A935_Android_10.0_EVK_Quick_Start_Guide.pdf Quick Start Guide
Tool folder Descripon
VIA_Android_USB_Driver.zip VIA USB driver
PoseDetector_Image.apk A sample test program
1.1.1 Firmware Folder Contents
VIA_ARTiGO_A935_Android_10.0_EVK.zip: Contains the precompiled Android image for evaluang the VIA
ARTiGO A935.
1.1.2 Document Folder Contents
VIA_ARTiGO_A935_Android_10.0_EVK_Quick_Start_Guide.pdf: This Quick Start Guide provides an overview
on how to boot the Android image for the VIA ARTiGO A935 and congure the supported hardware funcons
in the build.
1.1.3 Tool Folder Contents
VIA_Android_USB_Driver.zip: The VIA driver for ADB-over-USB.
PoseDetector_Image.apk: A sample program to test MTK NeuroPilot AI APU hardware acceleraon.
2
VIA ARTiGO A935 Android 10.0 EVK Quick Start Guide
1.2 Version Informaon and Supported Features
• Kernel version: 4.14.141
• Evaluaon image: Android 10.0
• Development based on MediaTek Android 10.0 BSP
• Supports eMMC boot
• Supports HDMI display
• Supports HDMI audio output
• Supports COM port as RS-232 mode (TX/RX)
• Supports 10/100Mbps Ethernet port
• Supports MediaTek MT6357 Line-out and Mic-in
• Supports MediaTek MT6631 Wi-Fi 802.11ac and Bluetooth 5.0
• Supports VIA EMIO-2573 (EC25) 4G LTE mobile broadband miniPCIe module
• Supports MediaTek NeuroPilot AI APU hardware acceleraon
3
VIA ARTiGO A935 Android 10.0 EVK Quick Start Guide
2. Image Installaon
This secon explains the setup procedures for boong from the eMMC.
The precompiled images are provided in the "Firmware" folder.
2.1 Installing with the Fastboot Mode
Follow the steps below to install Android EVK image:
Step 1
Prepare the "fastboot tool" and install the "VIA USB driver" into your Windows 10 host machine.
To get the "fastboot tool" for Windows, please refer to the "SDK Plaorm Tools release notes" chapter on the
Android developer website hps://developer.android.com/studio/releases/plaorm-tools.
To install the "VIA USB driver", right-click "android_winusb" and select "Install".
Then click "Install" when the installer opens.
When the installer nishes, it will show a conrmaon message "The operaon completed successfully".
Step 2
Connect the Windows 10 host machine and the VIA ARTiGO A935 through the Micro USB 2.0 port using the
Micro USB cable.
Micro USB 2.0 OTG
Micro USB 2.0 port diagram
4
VIA ARTiGO A935 Android 10.0 EVK Quick Start Guide
Step 3
Plug in the AC-to-DC power adapter to power on the VIA ARTiGO A935.
If the EVK image is not installed, the VIA ARTiGO A935 will stop at "fastboot: processing commands" as shown
in the debug console below. Proceed to step 4 directly.
Fastboot Mode
If the EVK image is already installed, use the following command to enter the Fastboot Mode on your Windows
10 host machine.
D:\platform-tools>adb shell reboot bootloader
Note:
Make sure the Windows 10 host machine detects the VIA ARTiGO A935 as an ADB device.
Step 4
Extract the VIA_ARTiGO_A935_Android_10.0_EVK.zip les on your Windows 10 host machine.
To install the image, use the following command:
D:\VIA_ARTiGO_A935_Android_10.0_EVK>set PATH=D:\platform-tools;%PATH%
D:\VIA_ARTiGO_A935_Android_10.0_EVK>viaash.exe --android
VIA: Operating system is Android
VIA: installing preloader.img
VIA: installing GPT.img
VIA: erasing proinfo partition
VIA: erasing boot_para partition
VIA: installing cam_vpu1.img
VIA: installing cam_vpu2.img
VIA: installing cam_vpu3.img
VIA: erasing nvram partition
VIA: installing protect1.img
VIA: installing protect2.img
VIA: installing persist.img
VIA: installing nvcfg.img
VIA: erasing seccfg partition
VIA: installing lk.img
VIA: installing lk.img
VIA: installing boot.img
VIA: installing recovery.img
VIA: erasing para partition
VIA: installing logo.bin
VIA: installing dtbo.img
VIA: erasing expdb partition
VIA: erasing frp partition
VIA: installing tee.img
VIA: installing tee.img
VIA: erasing kb partition
VIA: erasing dkb partition
VIA: erasing metadata partition
VIA: installing vbmeta.img
VIA: installing nvdata.img
VIA: installing vbmeta_system.img
VIA: installing vbmeta_vendor.img
VIA: installing super.img
VIA: installing cache.img
VIA: installing userdata.img
VIA: rebooting target system
D:\VIA_ARTiGO_A935_Android_10.0_EVK>
5
VIA ARTiGO A935 Android 10.0 EVK Quick Start Guide
Step 5
Unplug the AC-to-DC power adapter to power o the VIA ARTiGO A935.
Step 6
Unplug the Micro USB cable, press the Power Buon for 2 seconds, then release it to power on the VIA ARTiGO
A935.
When the boot process has completed, you will see the Android 10.0 desktop.
6
VIA ARTiGO A935 Android 10.0 EVK Quick Start Guide
3. Hardware Funcons
This secon explains how to enable and test the hardware funcons precompiled in the Android 10.0 EVK.
3.1 Enabling ADB Debugging
Follow the steps below to enable ADB debugging:
Step 1
Connect the Windows 10 host machine and the VIA ARTiGO A935 through the Micro USB 2.0 port using the
Micro USB cable.
Micro USB 2.0 OTG
Micro USB 2.0 port diagram
Step 2
Power on the VIA ARTiGO A935 to iniate the boot process.
Step 3
When the VIA ARTiGO A935 has completed boong, use the following command to open ADB debugging.
E:\platform-tools>adb shell
3.2 Changing the Kernel Debug Level
To disable the kernel messages, modify the debug level using the following command:
console:/ # su
console:/ # echo 3 > /proc/sys/kernel/printk
3.3 Checking the BSP Version
To check the BSP version, use the following command:
console:/ # cat /proc/version
Andere Handbücher für ARTiGO A935
1
Inhaltsverzeichnis
Andere VIA Technologies Computerhardware Handbücher
VIA Technologies
VIA Technologies ARTiGO A950 Bedienungsanleitung
VIA Technologies
VIA Technologies SOM-6X50 Bedienungsanleitung
VIA Technologies
VIA Technologies VAB-3000 Bedienungsanleitung
VIA Technologies
VIA Technologies SOM-6X80 Bedienungsanleitung
VIA Technologies
VIA Technologies VT82C693A Bedienungsanleitung
VIA Technologies
VIA Technologies VAB-3000 Bedienungsanleitung
VIA Technologies
VIA Technologies SOM-9X50-STK Bedienungsanleitung
VIA Technologies
VIA Technologies Mobile360 FSS Bedienungsanleitung
VIA Technologies
VIA Technologies QSM-8Q60 Bedienungsanleitung
VIA Technologies
VIA Technologies ENT-610M Bedienungsanleitung
VIA Technologies
VIA Technologies EPIA-P720 Bedienungsanleitung
VIA Technologies
VIA Technologies P4M900 Bedienungsanleitung
VIA Technologies
VIA Technologies ARTiGO A820 Bedienungsanleitung
VIA Technologies
VIA Technologies VB7009 Bedienungsanleitung
VIA Technologies
VIA Technologies SOM-9X50-STK Bedienungsanleitung
VIA Technologies
VIA Technologies SOM-9X50-STK Bedienungsanleitung
VIA Technologies
VIA Technologies VAB-600 SmartETK SDK Bedienungsanleitung
VIA Technologies
VIA Technologies SOM-9X35 Bedienungsanleitung
VIA Technologies
VIA Technologies LPC-01 Bedienungsanleitung
VIA Technologies
VIA Technologies ARTiGO A1250 Bedienungsanleitung
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
