Viavi NSC-100 Bedienungsanleitung

VIAVI//Public

Network & Service Companion (NSC-100/200)

Network & Service Companion

QUICK CARD

TCP Throughput Testing with iPerf

This quick card describes how to run an iPerf TCP Throughput test using the NSC-100 or

NSC-200 Network & Service Companion OneCheck Ethernet test.

•Mobile Device (Smartphone or Tablet) with VIAVI Mobile TechApp

•Network & Service Companion equipped with the following:

oSoftware release V4.2.5 or greater

oNSC-OC-ETHERNET option for up to 1 Gigabit Ethernet testing

oNSC-IPERF-1G option for up to 1 Gigabit Ethernet testing

oNSC-IPERF-10G option for 2.5, 5, AND 10 Gigabit Ethernet testing

oNSC-OPTICAL-ETHERNET to perform tests with an Optical Transceiver.

•Optical Transceiver supporting the line rate to be tested:

oNSC-SFP-ELEC-10G 10G Electrical Ethernet SFP+

oNSC-SFP-ELEC-1-2.5-5-10G 1G, 2.5G, 5G and 10G Electrical Ethernet SFP+

oNSC-SFP-ELEC-AUTO-10G 2.5G, 5G and 10G Auto-neg Electrical Ethernet SFP+

oNSC-SFP-850-1G-10G 1G and 10G Optical Ethernet SFP+ 850 nm SR

oNSC-SFP-1310-1G-10G 1G and 10G Optical Ethernet SFP+ 1310 nm LR

oNSC-SFP-1550-1G-10G 1G and 10G Optical Ethernet SFP+ 1550 nm ER

•Cables to match the optical transceiver and the line under test

•Fiber optic inspection microscope (P5000i or FiberChek Probe)

•Fiber optic cleaning supplies Figure 1: Equipment Requirements

PAIRING THE NSC TO YOUR MOBILE DEVICE

On the Network & Service Companion:

1. Press the Power button to turn on the unit.

The Power indicator will turn solid green when

the NSC is on.

2. Press and hold the Pair button on the NSC

for 3 seconds to enter pairing mode. The blue

Pair indicator blinks.

Figure 2: Front View

VIAVI//Public

Network & Service Companion (NSC-100/200)

Network & Service Companion

QUICK CARD

►The following Information is needed to

configure the Ethernet Profile:

•Interface Type (RJ-45 or SFP)

•Autonegotiation (On or Off)

•Interface Rate

(10M, 100M, 1G, 2.5G, 5G, 10G)

•Upload Speed Threshold (Mbps)

•Download Speed Threshold (Mbps)

•Iperf Server DNS name or IP address

1. Press to display the

Profile Manager screen.

2. Press

to create a new profile.

3. Select New Ethernet Profile and, if prompted,

ACCEPT TERMS OF USE.

CONFIGURE PROFILE

On the Mobile Device:

1. Go to the Settings menu, enable Bluetooth,

and scan for available devices.

2. Pair with VIAVI NSC.

3. Launch the VIAVI Mobile Tech App:

1. If you are using Stratasync for Asset

and Report Management, tap LOGIN

WITH INSTRUMENT, enter your Tech

ID, and tap LOGIN when prompted.

2. If you do not use Stratsync, tap LOCAL

MODE.

4. Press to connect to VIAVI NSC.

5. Press to view the

Companion menu. You can now control the

instrument through the Mobile Tech App and

run all tests on the Companion.

6. Press to exit Job View.

Figure 3: Mobile Tech App Figure 4: Companion

Figure 6: Profile Manager Figure 7: Create New Profile

Figure 5: Work Order

VIAVI//Public

Network & Service Companion (NSC-100/200)

Network & Service Companion

QUICK CARD

4. Enter a Profile Name.

5. Slide controls to the right to enable

Run Ping Test and Run Iperf.

Slide all other General controls to the left .

6. Swipe up screen to view Interface

Configuration and Data Interface settings.

7. Configure Interface Type as follows:

8. Configure other interface settings to match the

port under test on your network equipment:

►Autonegotiation: On or Off

(typically, on)

►Interface Rate: 10M, 100M, 1G, 2.5G,

5g, or 10G (Only needed if

Autonegotation is Off)

9. If a Static IPAddress if required, change the

Address Type to “Static” and enter IPv4

Address, Gateway, and Subnet Mask.

10. Swipe up screen to view Ping settings.

►In the Server section, enter the DNS

name or IPAddress of your iPerf Server.

11. Swipe up screen to view Iperf Test settings.

►Enter the DNS Name or IPAddress of the

Iperf Server.

►Enter the Port for the Iperf server.

►Enter the maximum Window Size (KB)

supported by the Iperf server.

►Enter Upload and Download Pass/Fail

Thresholds (Typically 95% of CIR).

12. Press to initiate the test.

CONFIGURE PROFILE (Continued)

Figure 8: Profile Editor Figure 9: Interface Configuration

Port Interface Type

1Gig Electrical RJ45

2.5Gig Electrical SFP

5Gig Electrical SFP

10Gig Electrical SFP

1Gig Optical SFP

10Gig Optical SFP

Figure 11: Iperf Configuration

Figure 10: Ping Configuration

VIAVI//Public

Network & Service Companion (NSC-100/200)

Network & Service Companion

QUICK CARD

CONNECT TO LINE UNDER TEST

►For 1G Electrical RJ45 interfaces:

1. Connect the RJ45 jack to the port under

test using CAT 5E or better cable..

►For Multigig Electrical SFP interfaces:

1. Insert desired Multigig Electrical SFP into

the SFP cage on the bottom of the NSC.

2. Connect the SFP to the port under test

using CAT 6A or better cable..

►For Optical Interfaces:

1. Insert desired Optical Transceiver into

the SFP port on the bottom of the NSC.

2. Use the VIAVI P5000i or FiberChek Probe microscope to inspect both sides of every connection

being used (SFP, attenuators, patch cables, bulkheads)

oFocus the fiber on the screen.

oIf it appears dirty, clean the fiber end-face and re-inspect.

oIf it appears clean, run the inspection test.

oIf it fails, clean the fiber and re-run inspection test. Repeat until it passes.

3. Connect the SFP to the port under test using a jumper cable compatible with the line under test..

SFP Cage

RJ45 Jack

Figure 12: Network and Service Companion Interfaces

Figure 13: Inspect Before You Connect

VIAVI//Public

Network & Service Companion (NSC-100/200)

Network & Service Companion

QUICK CARD

Product specifications and descriptions in this

document are subject to change without notice.

Patented as described at viavisolutions.com/patents

To reach the VIAVI office nearest you,

visit viavisolutions.com/contact

+1 844 GO VIAVI

(+1 844 468-4284)

RUN TEST

1. In the Select a Location window, tap Select and select the location for your test.

2. Press

3. Tap to zoom in on Iperf results and view progress.

4. When the test completes, verify that all results pass

and that Download and Upload speeds meet or exceed pass/fail thresholds.

5. Tap to return to the summary view.

Figure 14: Select a Location and Start Figure 15: Summary Results Figure 16: Iperf Results

Andere Handbücher für NSC-100

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Viavi Netzwerk-Hardware Handbücher

Viavi

Viavi 10/100 Copper nTAP Bedienungsanleitung

Viavi

Viavi NSC-100 Bedienungsanleitung

Viavi

Viavi Gen3 Rail Kit Bedienungsanleitung

Viavi

Viavi MAP-2100 Bedienungsanleitung

Viavi

Viavi NSC-100 Bedienungsanleitung

Viavi

Viavi APEX-ENT-32T Handbuch

Viavi

Viavi JACKSON LABS PNT-62 Series Bedienungsanleitung

Viavi

Viavi NSC-100 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung