Viavi IFR 4000 Stücklistenhandbuch

NAV/COMM TEST SET

IFR 4000

Getting Started Manual

GETTING STARTED MANUAL

NAV/COMM TEST SET

IFR 4000

PUBLISHED BY

VIAVI Solutions, Inc.

transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise

without the prior permission of the publisher.

Reissued Jan 2010

Issue-2 Mar 2010

Issue-3 Jul 2015

Issue-4 Oct 2016

Issue-5 Nov 2019

This manual contains essential information relating

to initial use of the unit.

VIAVI recommends the operator become familiar

with the Operation Manual contained on the

accompanying CD-ROM.

Product Warranty

Refer to http://www.viavisolutions.com/en-

us/warranty-information for the Product Warranty

information.

SAFETY FIRST: TO ALL OPERATIONS PERSONNEL

REFER ALL SERVICING OF UNIT TO QUALIFIED TECHNICAL PERSONNEL. THIS UNIT CONTAINS

NO OPERATOR SERVICEABLE PARTS.

WARNING: USING THIS EQUIPMENT IN A MANNER NOT SPECIFIED BY THE ACCOMPANYING

DOCUMENTATION MAY IMPAIR THE SAFETY PROTECTION PROVIDED BY THE

EQUIPMENT.

CASE, COVER OR PANEL REMOVAL

Opening the Case Assembly exposes the operator to electrical hazards that can result in electrical

shock or equipment damage. Do not operate this Test Set with the Case Assembly open.

SAFETY IDENTIFICATION IN TECHNICAL MANUAL

This manual uses the following terms to draw attention to possible safety hazards, that may exist when

operating or servicing this equipment.

CAUTION: THIS TERM IDENTIFIES CONDITIONS OR ACTIVITIES THAT, IF IGNORED, CAN RESULT

IN EQUIPMENT OR PROPERTY DAMAGE (E.G., FIRE).

WARNING: THIS TERM IDENTIFIES CONDITIONS OR ACTIVITIES THAT, IF IGNORED, CAN RESULT

IN PERSONAL INJURY OR DEATH.

SAFETY SYMBOLS IN MANUALS AND ON UNITS

CAUTION: Refer to accompanying documents. (This symbol refers to

specific CAUTIONS represented on the unit and clarified in the text.)

AC OR DC TERMINAL: Terminal that may supply or be supplied with AC or

DC voltage.

DC TERMINAL: Terminal that may supply or be supplied with DC voltage.

AC TERMINAL: Terminal that may supply or be supplied with AC or

alternating voltage.

EQUIPMENT GROUNDING PRECAUTION

Improper grounding of equipment can result in electrical shock.

USE OF PROBES

Check the specifications for the maximum voltage, current and power ratings of any connector on the

Test Set before connecting it with a probe from a terminal device. Be sure the terminal device

performs within these specifications before using it for measurement, to prevent electrical shock or

damage to the equipment.

POWER CORDS

Power cords must not be frayed, broken nor expose bare wiring when operating this equipment.

USE RECOMMENDED FUSES ONLY

Use only fuses specifically recommended for the equipment at the specified current and voltage

ratings.

SAFETY FIRST: TO ALL OPERATIONS PERSONNEL (cont)

INTERNAL BATTERY

This unit contains a Lithium Ion Battery, serviceable only by a qualified technician.

CAUTION: SIGNAL GENERATORS CAN BE A SOURCE OF ELECTROMAGNETIC INTERFERENCE

(EMI) TO COMMUNICATION RECEIVERS. SOME TRANSMITTED SIGNALS CAN CAUSE

DISRUPTION AND INTERFERENCE TO COMMUNICATION SERVICES OUT TO A

DISTANCE OF SEVERAL MILES. USERS OF THIS EQUIPMENT SHOULD SCRUTINIZE

ANY OPERATION THAT RESULTS IN RADIATION OF A SIGNAL (DIRECTLY OR

INDIRECTLY) AND SHOULD TAKE NECESSARY PRECAUTIONS TO AVOID POTENTIAL

COMMUNICATION INTERFERENCE PROBLEMS.

Page 1

Nov 2019

TABLE OF CONTENTS

Service Upon Receipt of Material 2

Specifications 4

Installation 5

Controls, Connectors and Indicators 8

Screen Hierarchy 12

Self Test 16

Battery/Voltage Instructions 21

Fuse Replacement 25

Battery Replacement 26

Page 2

Nov 2019

SERVICE UPON RECEIPT OF MATERIAL

UNPACKING

Special-design packing material inside this shipping carton provides maximum protection for the

IFR 4000. Avoid damaging the carton and packing material during equipment unpacking. Use the

following steps for unpacking the IFR 4000.

Cut and remove the sealing tape on the carton top and open the carton.

Grasp the IFR 4000 transit case firmly, while restraining the shipping carton, and lift the equipment

and packing material vertically.

Place the IFR 4000 transit case and end cap packing on a suitable flat, clean and dry surface.

Remove the protective plastic bag from the IFR 4000 transit case.

Place protective plastic bag and end cap packing material inside shipping carton.

Store the shipping carton for future use should the IFR 4000 need to be returned.

Page 3

Nov 2019

SERVICE UPON RECEIPT OF MATERIAL (cont)

CHECKING UNPACKED EQUIPMENT

Check the equipment for damage incurred during shipment. If the equipment has been damaged or if

items seem to be absent from the shipment, report the damage and/or discrepancies to VIAVI Customer

Service.

DESCRIPTION PART NUMBER STANDARD/OPTIONAL QTY

IFR 4000

STANDARD

AC/DC POWER SUPPLY

67366 (7110-5600-200)

STANDARD

ANTENNA, 75 MHz

9140 (1201-5601-000)

STANDARD

ANTENNA, TELESCOPING

9137 (1201-0909-900)

STANDARD

TNC (MALE - MALE) COAXIAL CABLE

62398 (6041-5680-800)

STANDARD

TNC SHORT

24140 (2289-0001-009)

STANDARD

50 ΩLOAD

24141 (2289-0001-010)

STANDARD

5 A FUSE

56080 (5106-0000-057)

STANDARD

TRANSIT CASE

10238 (1412-5653-000)

STANDARD

POWER CORD (110 USE) (US ONLY)

62302 (6041-0001-000)

STANDARD

POWER CORDS (220 USE)

64020 (7001-9903-000)

STANDARD

ANTENNA INSTRUCTIONS (PAPER)

6085 (1002-5600-8P0)

STANDARD

PASSWORD CARD (PAPER)

6086 (1002-5600-9P0)

STANDARD

OPERATION MANUAL (CD-ROM)

6081 (1002-5600-2C0)

STANDARD

MAINTENANCE MANUAL (CD-ROM)

6083 (1002-5600-4C0)

OPTIONAL

RS-232 INTERFACE CABLE (15-PIN)

62399 (6041-5680-900)

OPTIONAL

RS-232 INTERFACE CABLE (25-PIN)

62400 (6041-5681-200)

OPTIONAL

BENCH STAND

63656 (6500-5681-000)

OPTIONAL

STANDARD EQUIPMENT OPTIONAL EQUIPMENT

Page 4

Nov 2019

SPECIFICATIONS

Input Power (Test Set)

Input Range: 11 to 32 Vdc

Power Consumption: 55 W Maximum

16 W Nominal at 18 Vdc with Charged Battery

Fuse Requirements: 5 A, 32 Vdc, Type F

Input Power (External AC to DC Converter)

Input Range: 100 to 250 VAC, 1.5 A Maximum, 47 to 63 Hz

Main Supply Voltage Fluctuations: ≤10% of the nominal voltage

Transient Overvoltages: According to Installation Category II

Environmental (Test Set)

Use: Pollution Degree 2

Altitude: ≤4800 meters

Operating Temperature: -20°to 55°C

(Battery Charging temperature range is 5°to 40°C,

controlled by internal charger)

Storage Temperature: -30°to 70°C

(Li Ion Battery must be removed when <-20°C and

>60°C)

Relative Humidity:

5°C to <10°C: 80%

10°C to <31°C: 95%

31°C to <40°C: 75%

40°C to 50°C: 45%

Environmental (External AC to DC Converter)

Use: Indoors

Altitude: ≤3000 meters

Temperature: 5°to 40°C

Page 5

Nov 2019

INSTALLATION

GENERAL

The IFR 4000 is powered by an internal Lithium Ion battery pack. The Test Set is supplied with an

external DC Power Supply that enables the operator to recharge the battery when connected to AC

power.

NOTE: The IFR 4000 can operate continuously on AC power via the DC Power Supply, for servicing

and/or bench tests.

BATTERY OPERATION

The internal battery is equipped to power the IFR 4000 for eight hours of continuous use, after which

time, the IFR 4000 battery needs recharging. Battery Operation Time Remaining (in Hours) is

displayed on all screens.

The IFR 4000 contains an automatic time-out to conserve power. If a key is not pressed within a 5 to

20 minute time period, the Test Set shuts Off (only when using battery power). The Power Down Time

may be set in the Setup Screen.

BATTERY CHARGING

The battery charger operates whenever DC power (11 to 32 Vdc) is applied to the Test Set with the

supplied DC Power Supply or a suitable DC power source. When charging, the battery reaches an

100% charge in approximately four hours. The internal battery charger allows the battery to charge

between a temperature range of 5°to 40°C. The IFR 4000 can operate, connected to an external DC

source, outside the battery charging temperature range (5°to 40°C).

The battery should be charged every three months (minimum) or disconnected for long term inactive

storage periods of more than six months. The Battery must be removed when conditions surrounding

the Test Set are <-20°C and >60°C)

SAFETY PRECAUTIONS

The following safety precautions must be observed during installation and operation. VIAVI assumes

no liability for failure to comply with any safety precaution outlined in this manual.

Complying with Instructions

Installation/operating personnel should not attempt to install or operate the IFR 4000 without reading

and complying with instructions contained in this manual. All procedures contained in this manual

must be performed in exact sequence and manner described.

Grounding Power Cord

WARNING: DO NOT USE A THREE-PRONG TO TWO-PRONG ADAPTER PLUG. DOING SO CREATES

A SHOCK HAZARD BETWEEN THE CHASSIS AND ELECTRICAL GROUND.

For AC operation, the AC Line Cable, connected to the DC Power Supply, is equipped with standard

three-prong plug and must be connected to a properly grounded three-prong receptacle that is easily

accessible. It is the customer's responsibility to:

Have a qualified electrician check receptacle(s) for proper grounding.

Replace any standard two-prong receptacle(s) with properly grounded three-prong receptacle(s).

Andere Handbücher für IFR 4000

Inhaltsverzeichnis

Andere Viavi Prüfgeräte Handbücher

Viavi

Viavi ONX 580 Bedienungsanleitung

Viavi

Viavi MSQ-900 Bedienungsanleitung

Viavi

Viavi HST-3000 Bedienungsanleitung

Viavi

Viavi T-BERD 5800 Stücklistenhandbuch

Viavi

Viavi T-BERD MTS 5800 Bedienungsanleitung

Viavi

Viavi Smart Class 4800 Bedienungsanleitung

Viavi

Viavi Xgig Maestro Referenzhandbuch

Viavi

Viavi OneAdvisor ONA-800 Stücklistenhandbuch

Viavi

Viavi T-BERD 5800 Bedienungsanleitung

Viavi

Viavi ComXpert CX100 Bedienungsanleitung

Viavi

Viavi OneAdvisor 800 Series Bedienungsanleitung

Viavi

Viavi T-BERD MTS 5800 Stücklistenhandbuch

Viavi

Viavi FIT-82P03-PRO Bedienungsanleitung

Viavi

Viavi 3550 Bedienungsanleitung

Viavi

Viavi T-BERD MTS 5800 Stücklistenhandbuch

Viavi

Viavi T-BERD/MTS-2000 Stücklistenhandbuch

Viavi

Viavi T-BERD/MTS-2000 Stücklistenhandbuch

Viavi

Viavi FBP-HD4i Bedienungsanleitung

Viavi

Viavi T-BERD MTS 5800 Stücklistenhandbuch

Viavi

Viavi SmartOTDR 100 Bedienungsanleitung

Viavi

Viavi T-BERD/MTS-5800 Stücklistenhandbuch

Viavi

Viavi SmartClass OLP-85 Series Bedienungsanleitung

Viavi

Viavi E4100 Series Stücklistenhandbuch

Viavi

Viavi T-BERD/MTS 4000 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung