Vicon V992D-N4 Gebrauchsanweisung

Quick User Guide Network Camera

Warning before installation

-Power off the Network camera if it is found to be smoking or smells unusual.

-Keep the Network camera away from water. If the Network camera gets wet, power

off immediately.

-Do not place the Network camera near heat sources, such as a television or oven.

-Refer to your product datasheet/specification for the operating temperature.

-Keep the Network camera away from direct sunlight.

-Do not place the Network camera in high humidity environments.

-Do not place the Network camera on unsteady surfaces.

-Do not touch the Network camera when there is lightning present.

-Do not disassemble the Network camera.

-Do not drop the Network camera.

-Do not insert any object, such as a screwdriver, into the Network camera.

For other safety and regulation information, refer to “User’s manual.”

1. Check Contents

No.

Item

Description

Network Camera

V992D-N4

Software CD

User’s manual, Utility software

Quick User Guide

This document

Accessories

Silica gel

Template for installation

Video monitor cable

Tapping Screw M4x30: 3 pcs

Anchor: 3 pcs

Screw M4x8: 4 pcs

Surface Mount Bracket

L-Wrench (T20)

Focus Adjust Ring

Anti-reflection collar (rubber)

2. Physical Description

Installation of Anti-Reflection Collar

Quick User Guide Network Camera

①Control Button

-Change Video output format NTSC/PAL (toggle)

-Factory Default (hold steadily for more than 10 seconds)

②Network LED

③Status LED

④Reset Button

⑤Video output for service monitor

⑥Lock nut

⑦Focus adjustment

⑧Network (RJ-45 PoE required)

3. Making Connection

Connect Ethernet cable to make a connection to the PoE hub.

The camera supports PoE only.

4. Assign IP Address

The default setting of the camera is set to “DHCP” and “UPnP” function is

set to ON. If you have a DHCP server on your network and UPnP function is

enabled on your PC you can find the network camera in “My network”.

If a DHCP server is not available on your network, assign IP address by

the following process.

Execute Multi Upgrade Tool (from the Installation CD). It will search cameras on

the network automatically.

1) After the list of detected devices appears, select the camera you are trying to

configure.

Quick User Guide Network Camera

2) Select the Network type as Static or DHCP. If Static is selected, enter all of the

network information for your camera.

3) Select the “Change IP Address” button. The message “Do you want to change IP

address?” will display; select “Yes” from the pop-up window.

4) Check the Type as Static or DHCP from the list.

Then double click the camera in the list; Internet Explorer® will open

automatically.

Quick User Guide Network Camera

5. Web Browser Connection

Note: The Network camera supports Internet Explorer 7 or above.

Please check version of your browser and update it if necessary.

When you first access the camera you need to download and install an

Active X control from the camera to display a Live View image.

Default User and Password are set to “ADMIN” and “1234”. Please type in

the user ID and password to connect the network camera.

Note: By Default the cameras come with “Installation Mode” set to “ON” to

enable Analog output. Additionally, all installation setup must be done prior

to the camera being used with a VMS, including ViconNet; the VMS forces

the Installation Mode to OFF. You must turn Installation Mode to Off to use

720p or 1080p streaming.

For further information on setup, refer to User’s manual on the software CD.

Inhaltsverzeichnis

Andere Vicon Sicherheitskamera Handbücher

Vicon

Vicon V992E Bedienungsanleitung

Vicon

Vicon V960-N Series Gebrauchsanweisung

Vicon

Vicon V940D Bedienungsanleitung

Vicon

Vicon surveyor 2000 XX004 Betriebsanleitung

Vicon

Vicon VC-621 Bedienungsanleitung

Vicon

Vicon Roughneck Pro V2000B Series Bedienungsanleitung

Vicon

Vicon IX 2000 L Bedienungsanleitung

Vicon

Vicon SN663V-B Bedienungsanleitung

Vicon

Vicon V2000D-W28IRM Bedienungsanleitung

Vicon

Vicon IX 8000 IR Bedienungsanleitung

Vicon

Vicon V662-D-2 Betriebsanleitung

Vicon

Vicon V661D-312N-1 Betriebsanleitung

Vicon

Vicon V9317H Series Bedienungsanleitung

Vicon

Vicon V980D Series Bedienungsanleitung

Vicon

Vicon ROUGHNECK V-CELL-HD-A Bedienungsanleitung

Vicon

Vicon V9360-1 Bedienungsanleitung

Vicon

Vicon Roughneck V926 Bedienungsanleitung

Vicon

Vicon ALU-2500/230 Service-Handbuch

Vicon

Vicon VC-3000-DSP Bedienungsanleitung

Vicon

Vicon V923-N Bedienungsanleitung

Vicon

Vicon G-Cam/EFD-3266 Bedienungsanleitung

Vicon

Vicon VC355-DSP Bedienungsanleitung

Vicon

Vicon V960D-N312 Gebrauchsanweisung

Vicon

Vicon SN240D Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung