Victaulic 751 Series Bedienungsanleitung

WARNING

• Read and understand all instructions before attempting to install any Victaulic piping products.

• Depressurize and drain the piping system before attempting to install, remove, adjust, or perform maintenance on any Victaulic products.

• Wear safety glasses, hardhat, and foot protection when working with Victaulic piping products.

• Any activities that require taking the valve out of service may eliminate the fire protection provided by the system. Before removing the

valve from service, notify the authority having jurisdiction. Consideration of a fire patrol should be given for the affected areas.

Failure to follow these instructions could result in serious personal injury and/or property damage.

EXPLODED VIEW DRAWING - AUXILIARY WATER MOTOR ALARM TEST VALVE KIT

TO SYSTEM

WATER

SUPPLY

TO WATER

MOTOR ALARM

DRAIN

NORMALLY

CLOSED

(LOCKABLE)

Bill of Materials

1 Auxiliary Water Motor Alarm Test Ball Valve

(Normally Closed - Lockable)

2 Flexible Stainless Steel Braided Hose

3 Female Tee

4 Close Nipple

I-751.VDS/KIT_1

Series 751 FireLock European Alarm Check Valve Stations

AUXILIARY WATER MOTOR ALARM TEST VALVE KIT

I-751.VDS/KITKIT INSTALLATION INSTRUCTIONS

www.victaulic.com

REV_A

REMOVING THE SYSTEM FROM SERVICE

1. Notify the authority having jurisdiction, remote station alarm

monitors, and those in the affected area that the system is being

taken out of service.

2. Close the water supply main control valve to take the system out of

service.

3. Open the system main drain valve, and allow the system to drain

completely. NOTE: It may be necessary to open the remote system

test valve (inspector’s test connection) and any auxiliary drains in

order to drain the system completely.

INSTALLATION OF THE AUXILIARY WATER MOTOR ALARM

TEST VALVE KIT

WARNING

• Make sure the valve is depressurized and

drained before attempting to remove any

trim from the valve.

Failure to follow this instruction could result

in serious personal injury and/or property

damage.

1. Make sure the valve is completely depressurized and drained.

2. Remove the trim at the locations designated in the exploded view

drawing on page 1.

3. Apply a small amount of pipe joint compound or Teflon* tape to

the external threads of all threaded pipe connections contained in

the kit. DO NOT get any tape, compound, or other foreign material

into the pipe connections.

4. Install the kit components, as shown in the exploded view drawing

on page 1.

5. Place the system back in service by following the “Placing

the System in Service” section of the I-751.VDS Installation,

Maintenance, and Testing Manual.

6. Check the connections for any leaks. If any leaks are present,

depressurize and drain the system and repair any leaks.

* Teflon is a registered trademark of the DuPont Company

I-751.VDS/KIT_2

Series 751 FireLock European Alarm Check Valve Stations

AUXILIARY WATER MOTOR ALARM TEST VALVE KIT

I-751.VDS/KIT

KIT INSTALLATION INSTRUCTIONS

www.victaulic.com

REV_A

PERFORMING THE WATER MOTOR ALARM TEST

1. Notify the authority having jurisdiction, remote station alarm

monitors, and anyone in the affected area that the water motor

alarm test will be performed.

2. Verify that the alarm line ball valve is open.

3. Open the auxiliary water motor alarm test ball valve.

3a. Confirm that mechanical and electrical alarms are activated and

that remote monitoring stations, if provided, receive an alarm

signal. NOTE: There may be a time delay if a Series 752 Retard

Chamber is installed.

4. Close the auxiliary water motor alarm test ball valve after proper

operation of all alarms is verified.

5. Confirm that all valves are in their normal operating positions (refer

to table below).

Valve Normal Operating Position

System Test Valve Closed

System Main Drain Valve Closed

Water Supply Main Control Valve Open

Alarm Line Ball Valve Open (Lockable)

Auxiliary Water Motor Alarm Test Ball Valve Closed (Lockable)

W AT ER MO T OR

ALAR M

SE R IE S 760

APPROVE D

VdS

System

Water

Supply To

Drain

Alarm Line Ball

Valve (Normally

Open Lockable)

System Test Valve

(Normally Closed)

Water Supply Main

Control Valve

System Main Drain

Valve (Normally Closed)

Auxiliary Water Motor

Alarm Test Valve

(Normally Closed Lockable)

I-751.VDS/KIT_3

Series 751 FireLock European Alarm Check Valve Stations

AUXILIARY WATER MOTOR ALARM TEST VALVE KIT

I-751.VDS/KITKIT INSTALLATION INSTRUCTIONS

www.victaulic.com

REV_A

Series 751 FireLock European Alarm Check Valve Stations

AUXILIARY WATER MOTOR ALARM TEST VALVE KIT

I-751.VDS/KITKIT INSTALLATION INSTRUCTIONS

I-751.VDS/KIT

For complete contact information, visit www.victaulic.com

I-751.VDS/KIT 5911 REV A UPDATED 10/2009 ZVDS751KIT

Andere Victaulic Steuereinheit Handbücher

Victaulic

Victaulic KOIL-KIT 799 Series Bedienungsanleitung

Victaulic

Victaulic FireLock 247 Series Bedienungsanleitung

Victaulic

Victaulic FireLock Vic-Strainer 732H Series Versionshinweis

Victaulic

Victaulic 809N Bedienungsanleitung

Victaulic

Victaulic FireLock 756 Series Bedienungsanleitung

Victaulic

Victaulic Vic-300 MasterSeal 761 Series Bedienungsanleitung

Victaulic

Victaulic FireLock 912 Service-Handbuch

Victaulic

Victaulic 871 Series Bedienungsanleitung

Victaulic

Victaulic 751 FireLock Series Bedienungsanleitung

Victaulic

Victaulic I-769N Bedienungsanleitung

Victaulic

Victaulic 725S Series Bedienungsanleitung

Victaulic

Victaulic 5-Year Rebuild Kit Bedienungsanleitung

Victaulic

Victaulic FireLock I-756 Series Bedienungsanleitung

Victaulic

Victaulic 867-42T Bedienungsanleitung

Victaulic

Victaulic 795 Series Bedienungsanleitung

Victaulic

Victaulic FireLock NXT 776 Series Bedienungsanleitung

Victaulic

Victaulic 867-4UF Bedienungsanleitung

Victaulic

Victaulic I-869E-3D Bedienungsanleitung

Victaulic

Victaulic End Caps Bedienungsanleitung

Victaulic

Victaulic 769N FireLock NXT Series Bedienungsanleitung

Victaulic

Victaulic FireLock 756 Series Bedienungsanleitung

Victaulic

Victaulic FireLock 758-LPA Series Bedienungsanleitung

Victaulic

Victaulic FireLock NXT 764 Series Bedienungsanleitung

Victaulic

Victaulic FireLock NXT 764 Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung