Video Domain WizeCam Bedienungsanleitung
User Manual for WizeCam IP Camera
Network/IP Camera
with WiFi
Version No.: 3.0V
Please read this user manual carefully before using the product.
Licensing Notice
The software and /or product described in this manual is furnished under a License and
Limited Warranty Agreement and may be used online in accordance with the terms of that
agreement.
Copyright ©Video Domain Technologies Ltd. 2005
The information in this manual was accurate and reliable at the time of its release.
However, Video Domain Technologies Ltd. reserves the right to change the specifications
of the product described in this manual without notice at any time. As such, the
descriptions and data included in this document may not be current. Video Domain
Technologies Ltd. assumes no responsibility for any inconsistencies between the actual
product and this manual's description of it. Any party electing to use this manual does so
with the full knowledge of the possibility of such inconsistencies and takes full
responsibility for any consequences that may arise while installing and/or using this
product.
Video Domain Technologies Ltd. holds the copyright to this manual. All rights are reserved.
No part of this publication may be reproduced or transmitted in any form or by any means
without prior written consent from Video Domain Technologies Ltd.
Registered Trademarks
MemoCam is a registered trademark of Video Domain Technologies Ltd. All other
proprietary names mentioned in this manual are the trademarks of their respective
owners.
Disclaimer
Video Domain Technologies Ltd. makes no warranties regarding the content of this
document. Video Domain Technologies Ltd. reserves the right to alter, modify and revise
the specification without notice. Video Domain Technologies Ltd. assumes no
responsibility for any errors contained herein.
The customer should note that in the field of multimedia there are a number of patents
held by various parties. It is the responsibility of the user to assure that a particular
implementation does not infringe on those patents. Video Domain Technologies Ltd. does
not indemnify the user from any patent or intellectual property infringement.
VDT Internet Support Services
To ensure customer satisfaction, Video Domain Technologies Ltd. has established VDT
Internet Support Services to process customer inquiries.
For product information including driver and manual updates, refer to:
www.vdomain.com
Document Version 031
September 2006
Video Domain Technologies Ltd.
Contents
Overview ……………………………………………………………………………..1
Brief Introduction ……………………………………………………………………………1
Features……………………………………………………………………………………...1
Operating Environment ……………………………………………………………………2
Technical Specifications……………………………………………………………….........3
Structure and Installation…………………………………………………...……….3
Software Settings…………………………………………………………...……3
Liview………………..………………………………………………………………………….….4
System…………………………………………………………………..……….9
Video………………………………………………………………………..…..10
Audio……………………………………………………………………..……...11
Motion…………………………………………………………………..……….12
Network……………………………………………………………………........13
Advanced……………………………………………………………….………15
User Manage……………………….………………………………….……….17
Image Set………………………………………………………………….…...18
SD Card………………………………….……………………………….….....18
Appendix……………………………………………………………………..…..18
Network Ports Occupied by IP Camera……………………………………..……..18
Default Network Parameters…………………………………………………….…..19
Application and Setting of DDNS Domain Name……..………………………..………19
WiFi Setting and Connection…………………………………………………..……23
Access and Setting of IP Camera in Different Network Environments………..……..27
Port Mapping in Router……….……………………………………………….………….32
FAQs………………………………………………………………………….………...35
Ordering Information…………….……………………………………….…………..39
1. Overview
1.1 Brief Introduction
WiseCam is an integrated IP camera solution. It is using a single chip to implement media
processing with the integration of Video and Audio, network transmission in one camera.
This provides an extremely high definition, high integration at low cost for
LAN/WAN –based, remote video monitoring device.
This IP Camera solution is adequate for small and medium homes or business offices
remote network video transmission and monitoring. The product features easy installation
and simple operation.
Special Features for each model:
Pan /Tilt (270/120deg.)
SD card
Wireless Wi-Fi
IR night vision (5m)
Bi-directional listening
Built-in microphone
External alarm input/output
1.2 General Features
Powerful high-speed video processor
Remote Pan/Tilt rotate (Horizontal:270 Degrees / Vertical :120 Degrees)
IR Night Vision
Optimized H.264 video compression for low –bandwidth transmission
High-Sensitivity CMOS sensor
Supports wireless networks (WiFi/802.1 B/G) mobile networks (CDMA 1X and GPRS)
Embedded Web Server
Supports DDNS, LAN, and Internet (ADSL, Cable Modem)
Multiple Network Protocols: TTP/TCP/IP/UDP/SMTP/DDNS/DNS/SNTP/DHCP/FTP
Supports up to 10 users simultaneous
Multi-Level users management and passwords definition
SD Card for local storage , supports SD 2.0 (Max 32 GB)
Build in / additional Microphone , supports bi-directional call and voice broadcast
Transmits alarms in case of video loss or motion detection (VMD)
2 Way (I/O) connection
Image shielding/image snapshot
Remote system upgrades
Smart Bracket for wall or ceiling installation
- 1 -
1.3 Operating Environment
Minimum Hardware Configuration:
CPU: Pentium 2.0 GHz
Memory: 256 MB
Graphics card: TNT2
Audio card: Mandatory for listening and bidirectional intercom
Hard disk: Recommended minimum size - 40G (or more).
Recommended Hardware Configuration:
CPU: Pentium 2.6 GMHz
Memory: 512 MB
Graphics card: Nvidia Geforce FX5200 or ATI RADEON 7000(9000) 128M video
memory
Operating System:
32-bit Windows2000, Windows XP, Windows2003 and Windows Vista, 32 and 64-bit
Software:
Internet protocol IPv4 (Note: IPv6 not supported for the time being)
IE 5.0 or above
DirectX8.0 or above
TCP/IP
Other requirements:
The graphics card running this software needs to support color conversion and zoom
of images. Presently the tested graphics cards include: Nvidia Tnt/Tnt2, Geforce
Mx200/400/420/440 Fx5200/5600,
ATI Radeon 7000/7200/7500/8500\9000/9200/9500/9600, MatroxG450/550, and
INTEL845G/865G.
Note: The driver for the graphics card must support hardware zoom.
- 2 -
1.4 Technical Specifications
Product WiseCam
Image sensor 1/4’’CMOS, 300,000 pixels, minimum illumination: 1
Lux
Video compression algorithm H.264 baseline profile @Level 2.2
Video resolution VGA: 640*480, QVGA: 320*240
Night vision distance 5m
PTZ control angle Horizontal: 270°; vertical: 120°
Video adjustment parameters Brightness, contrast, image quality
Stream format Pure video stream or composite audio/video stream
Video frame rate 1~30 frame/second
Video compression bit rate 16Kbit/second ~ 4Mbit/second
Audio input One linear input or embedded passive MIC input, MIC
impedance: 1000KΩ
Audio output One linear output
Audio compression algorithm G.726
RJ-45, 10/100M Ethernet interfaceSystem interface
SD card slot; Maximum: 32GB (SD2.0 protocol)
Wi-Fi module IEEE802.11b/g wireless network
Input power supply 5V/2A
Maximum power 6W
Operating temperature 0~+40°C
Operating humidity 10~85%
Dimensions (D x W x H) 95 mm x 95 mm x 13 mm (3.75' x 3.75' x 5')
WizeCam Weight (approx.) 410 gr (14,46 oz) w/o bracket , bracket 75 gr (2,64 oz)
WizeCam Kit Weight (approx.) 800 gr (28,22 oz)
2. Structure and Installation
Please refer to the Quick Installation Guide in the packaging box.
3. Software Settings
Enter the IP address of the IP camera in the Browser/ IE address bar, for example,
the default address of http://192.168.1.1. Enter the user name and password (both
“admin” by default) to log on.
- 3 -
3.1 Live View
3.1.1 Setting Items
On the left of the Homepage are items that a user can select. If an item is clicked,
the corresponding item turns yellow, and meanwhile goes to its setting interface.
For detailed settings, refer to the following descriptions.
Note: Only the system administrator has the right to set parameters.
3.1.2 PT Control and Alarm Messages
- 4 -
Meanings of buttons:
1. Up
2. Down
3. Left
4. Right
5. Returns to the default/ initial position
6. Rotates once in horizontal direction
7. Rotates once in vertical direction
8. Stops continuous rotation
9. Displays/Lists alarm time and type in case of an alarm/s.
3.1.3 Functional Buttons
If clicked once, the above buttons will turn Red (except Alarm), indicating the
function is active. Clicking once more it turns off the selected function (Record,
Reply etc.).
Meaning of buttons:
Snap: Snapshots a JPEG picture and stores it in the designated
path/location, as shown in the following figure:
Record: Records Video files and stores them in a designated path/location.
If the Audio is required, recording can be made at the same time provided the
function is enabled. If during recording, you would like to select another item,
an alert message appears, prompting “This will be stopped if you turn to the
other pages, continue?”, as shown in the following figure:
Call: Enables the two way voice function. Please connect the Audio signal
line of the device to an audio amplified device (such as PC Speakers).
Audio: Enables the listen in function. The device has a built-in MIC to
listen on-site voices in real time.
Alarm: If the motion detection alarm function is set, (refer to the section of
- 5 -
Motion for details), the indicator turns red and blinks after an alarm is triggered.
After an alarm is triggered, by double clicking on this button stops the alarm
and clears the content in the alarm messages window.
By default, an alarm event will stop automatically in ten seconds after being
triggered without any intervention.
Playback: Enables online playback of record Video and or Audio files, as
shown in the following figure:
3.1.4 Retrieving Record Files
The user can search record files in the local PC or SD card (DEV).
Date: Select a date and click . The calendar selection interface appears, as
shown in the following figure:
<<Decrease years
>> Increase years
<Decrease months
> Increase months
After a date is selected, the calendar interface closes automatically.
- 6 -
PC: Queries record files in the local PC.
DEV: Queries record files in the SD card.
Click to search record files in the PC or SD card on the designated date.
The method for searching record files in different durations of a day is as shown in
the following figure:
The Record column displays the list of retrieved
record files by time.
The Pic column displays the list of retrieved
recorded files by number.
Each bar on the left of each column represents one
hour.
Each bar on the right of each column represents 2
minutes.
Displays a currently selected time;
Displays the currently retrieved record files or
picture files in a time segment;
File List
Displays a list of the currently retrieved record files
or JPEG pictures.
3.1.5 Playing Record Files
Select a record file or JPEG file to be played from
the File List (1) double click it to play or (2) select it
and click . During play, the right window clock
displays the progress so that the user can view
playing information and operate played content, as
shown in the following figure:
Respectively indicates: Open a file, play, pause, stop, fast backward, fast forward,
single frame forward, volume switch, cyclic play, snap
Progress
- 7 -
Inhaltsverzeichnis
