© 2023 System Q Ltd
3
Index
VideoMitter.com
Introduction
The 2MP HD MegaMitter can transmit one AHD CCTV camera wirelessly.
The MegaMitters are sold in pairs and one acts a transmitter and the other a receiver
for a one 2 one transmission.
For greater distances consider upgrading the antennas to directional ones which are
sold separately.
Up to 4 pairs of MegaMitters can be used on the same site but it is recommended to
use directional antennas when using multiple sets and keep them a minimum of 2m
apart.
The MegaMitters require power from regulated 12V DC power supply.
Note: power supplies are sold separately.
User Information
·
Ensure the camera connected has a 4-in-1 selectable output set to AHD or have a
AHD video output (2MP).
·
Ensure the MegaMitters are installed in line of sight with no obstructions in between
the TX & RX.
·
The connections must be kept clean and dry, where they will not be exposed to high
temperatures, moisture or excessive dust.
·
Do not touch the product connections with wet hands.
·
Ensure the power is switched off if the product is not in use for a long period of
time.
·
There are no user serviceable parts in the product. Opening or attempting to repair
the product will void the warranty.
·
Only use a suitable regulated 12V DC power supply.
·
Do not install or use the device if the power cable or video connections are
damaged.
·
Do not use alcohol or solvents to clean the product, only clean using a damp cloth.
