Viessmann Vitodens 050-W BP JD Kurzanleitung

Installation and service

instructions

for contractors

VIESMANN

Vitodens 050-W

Type BPJD, 6.5 to 35.0 kW

Wall mounted gas condensing boiler

For natural gas and LPG

Gas Council Number: 47 819 31, 47 819 32

For applicability, see the last page

VITODENS 050-W

5675 991 GB 2/2015 Please keep safe.

Please follow these safety instructions closely to prevent accidents and mate-

rial losses.

Safety instructions explained

Danger

This symbol warns against the

risk of injury.

!Please note

This symbol warns against the

risk of material losses and envi-

ronmental pollution.

Note

Details identified by the word "Note" con-

tain additional information.

Target group

These instructions are exclusively inten-

ded for authorised contractors.

■ Work on gas installations must only be

carried out by a registered gas fitter.

■ Work on electrical equipment must

only be carried out by a qualified elec-

trician.

■ The system must be commissioned by

the system installer or a qualified per-

son authorised by the installer.

Regulations to be observed

■ National installation regulations

■ Statutory regulations for the preven-

tion of accidents

■ Statutory regulations for environmen-

tal protection

■ Codes of practice of the relevant trade

associations

■ All current safety regulations as

defined by DIN, EN, DVGW, TRGI,

TRF, VDE and all locally applicable

standards

aÖNORM, EN, ÖVGW-TR Gas,

ÖVGW-TRF and ÖVE

cSEV, SUVA, SVGW, SVTI,

SWKI, VKF and EKAS guideline

1942: LPG, part 2

Safety instructions for working on the

system

Working on the system

■ Where gas is used as the fuel, close

the main gas shut-off valve and safe-

guard it against unintentional reopen-

ing.

■ Isolate the system from the power sup-

ply, e.g. by removing the separate fuse

or by means of a mains isolator, and

check that it is no longer 'live'.

■ Safeguard the system against recon-

nection.

Danger

Hot surfaces can cause burns.

■ Before maintenance and serv-

ice work, switch OFF the appli-

ance and let it cool down.

■ Never touch hot surfaces on

the boiler, burner, flue system

or pipework.

Safety instructions

5675 991 GB

!Please note

Electronic assemblies can be

damaged by electrostatic dis-

charge.

Prior to commencing work, touch

earthed objects such as heating

or water pipes to discharge static

loads.

Repair work

!Please note

Repairing components that fulfil a

safety function can compromise

the safe operation of the sys-

tem.

Replace faulty components only

with genuine Viessmann spare

parts.

Auxiliary components, spare and

wearing parts

!Please note

Spare and wearing parts that

have not been tested together

with the system can compromise

its function. Installing non-author-

ised components and making

non-approved modifications or

conversions can compromise

safety and may invalidate our

warranty.

For replacements, use only orig-

inal spare parts supplied or

approved by Viessmann.

Safety instructions for operating the

system

If you smell gas

Danger

Escaping gas can lead to explo-

sions which may result in serious

injury.

■ Never smoke. Prevent naked

flames and sparks. Never

switch lights or electrical appli-

ances on or off.

■ Close the gas shut-off valve.

■ Open windows and doors.

■ Evacuate any people from the

danger zone.

■ Notify your gas or electricity

supply utility from outside the

building.

■ Have the power supply to the

building shut off from a safe

place (outside the building).

If you smell flue gas

Danger

Flue gas can lead to life threat-

ening poisoning.

■ Shut down the heating system.

■ Ventilate the installation site.

■ Close doors to living spaces to

prevent flue gases from

spreading.

Safety instructions

Safety instructions (cont.)

5675 991 GB

What to do if water escapes from the

appliance

Danger

When water escapes from the

appliance there is a risk of elec-

trocution.

Switch off the heating system by

means of an external isolator (for

example fuse box, domestic

power distribution).

Flue systems and combustion air

Ensure that flue systems are clear and

cannot be sealed, for instance due to

accumulation of condensate or other

causes. Ensure an adequate supply of

combustion air.

Instruct system users that subsequent

modifications to the building characteris-

tics are not permissible (e.g. cable/pipe-

work routing, cladding or partitions).

Danger

Leaking or blocked flue systems,

or an inadequate supply of com-

bustion air can cause life threat-

ening poisoning from carbon

monoxide in the flue gas.

Ensure the flue system is in good

working order. Apertures for sup-

plying combustion air must be

non-closable.

Extractors

Operating appliances that extract air to

the outside (cooker hoods, extractors, air

conditioning units, etc.) can create neg-

ative pressure. If the boiler is operated at

the same time, this can lead to reverse

flow of the flue gas.

Danger

The simultaneous operation of

the boiler and appliances that

extract air to the outside can

result in life threatening poison-

ing due to reverse flow of the flue

gas.

Fit an interlock circuit or take suit-

able steps to ensure an adequate

supply of combustion air.

Safety instructions

Safety instructions (cont.)

5675 991 GB

Installation instructions

Information

Symbols................................................................................................................ 7

Intended use......................................................................................................... 8

Product information.............................................................................................. 8

Disposal of packaging.......................................................................................... 10

Preparing for installation................................................................................... 11

Installation sequence

Mounting the boiler and making the connections................................................. 15

Opening the programming unit............................................................................. 20

Electrical connections........................................................................................... 21

Service instructions

Commissioning, inspection, maintenance

Steps - commissioning, inspection and maintenance.......................................... 24

Further details regarding the individual steps....................................................... 25

Troubleshooting

Function sequence and possible faults................................................................ 47

Fault display......................................................................................................... 48

Repairs................................................................................................................. 53

Gas type conversion

Converting from LPG to natural gas..................................................................... 63

Control unit

Functions and operating conditions in weather-compensated mode................... 65

Designs

Connection and wiring diagrams.......................................................................... 67

Parts lists

Ordering parts...................................................................................................... 72

Overview of assemblies....................................................................................... 73

Casing assembly.................................................................................................. 74

Heat cell assembly............................................................................................... 75

Burner assembly.................................................................................................. 77

Hydraulic assembly.............................................................................................. 79

Grundfos hydraulic assembly............................................................................... 81

Control unit assembly........................................................................................... 83

Index

5675 991 GB

Miscellaneous assembly...................................................................................... 85

Specification....................................................................................................... 86

Certificates

Declaration of conformity...................................................................................... 87

Keyword index.................................................................................................... 88

Index

Index (cont.)

5675 991 GB

Sym-

bol

Meaning

Reference to other document

containing further information

Step in a diagram:

The numbers correspond to the

order in which the steps are car-

ried out.

Warning of material losses and

environmental pollution

Live electrical area

Pay particular attention.

■ Component must audibly

click into place.

■ Acoustic signal

■ Fit new component.

■ In conjunction with a tool:

Clean the surface.

Dispose of component correct-

ly.

Dispose of component at a suit-

able collection point. Do not

dispose of component in do-

mestic waste.

Information

Symbols

5675 991 GB

Installation

The appliance is only intended to be

installed and operated in sealed unven-

ted heating systems that comply with

EN 12828, with due attention paid to the

associated installation, service and

operating instructions. It is only designed

for the heating of water that is of potable

water quality.

Intended use presupposes that a fixed

installation in conjunction with permissi-

ble, system-specific components has

been carried out.

Commercial or industrial usage for a pur-

pose other than heating the building or

DHW shall be deemed inappropriate.

Any usage beyond this must be

approved by the manufacturer in each

individual case.

Incorrect usage or operation of the appli-

ance (e.g. the appliance being opened

by the system user) is prohibited and will

result in an exclusion of liability. Incorrect

usage also occurs if the components in

the heating system are modified from

their intended use (e.g. if the flue gas and

ventilation air paths are sealed).

Product information

Vitodens 050-W, type BP JD

Preset for operation with natural gas.

Conversion to LPG P requires a gas con-

version kit.

Gas Council No.

■ 29 kW combi: 47 819 31

■ 35 kW combi: 47 819 32

Conversion for other countries

The Vitodens 050-W must only be deliv-

ered to the countries specified on the

type plate. For deliveries to alternative

countries, an approved contractor must

arrange individual approval on his/her

own initiative and in accordance with the

law of the country in question.

Product description

The Vitodens 050-W is available as a

gas condensing combi boiler with inte-

gral plate heat exchanger for DHW heat-

ing. For the connection of heating circuits

and DHW line, see page 14 onwards.

The Vitodens 050-W is set up for opera-

tion with a constant boiler water temper-

ature.

The appliance is equipped with a sealed

unvented hydraulic system with 2 con-

nections for heating flow and return and

2 connections for DHW heating.

Information

Intended use

5675 991 GB

The following components are integra-

ted into the hydraulic system:

■ Circulation pump

■ 3-way diverter valve

■ Safety valve

■ Diaphragm expansion vessel

■ Plate heat exchanger for DHW heating

Connecting accessories

A time switch (accessories) can be con-

nected to the control unit with a low volt-

age supply.

Siting

Suitable siting locations include:

■ Recreational rooms and other living

spaces

■ Ancillary rooms without own ventila-

tion

■ Cupboards (open at the top)

■ Recesses without compulsory clear-

ance towards combustible materials

■ Attic rooms (pitched attics and long

panes) where the balanced flue pipe

can be routed directly through the roof

Since the flue pipe connection for room-

sealed operation is surrounded by com-

bustion air (coaxial pipe), no clearances

towards combustible materials need be

maintained. For further details, see the

technical guide on flue systems for the

Vitodens.

The installation area must be safe from

the risk of frost.

Operation of the Vitodens 050-W in wet rooms

Area 0

Area 1

Area

Area 2

600

2250

The Vitodens is approved for installation

in wet rooms (e.g. bathroom or shower

rooms) (protection IP X4 D, splash-

proof).

Information

Product information (cont.)

5675 991 GB

Installation

When installing the Vitodens in wet

areas, observe the safety zones and

minimum wall clearances according to

VDE 0100 [or local regulations] (see also

"Electrical safety zone"). The Vitodens

may be installed in safety zone 1 if

hosed water (e.g. from massage show-

ers) is prevented.

Electrical equipment in rooms containing

a bathtub or a shower must be installed

in such a way that users cannot be

exposed to dangerous body currents.

VDE 0100 specifies that cables supply-

ing permanently installed consumers in

zones 1 and 2 should only be run verti-

cally and routed into the equipment from

the back.

Disposal of packaging

Please dispose of waste packaging in

line with statutory regulations.

Information

Product information (cont.)

5675 991 GB

Inhaltsverzeichnis

Andere Viessmann Kessel Handbücher

Viessmann

Viessmann Vitodens 200-W System Kurzanleitung

Viessmann

Viessmann Vitoplex 100-LS SXD Service-Handbuch

Viessmann

Viessmann VITOCROSSAL 300 Bedienungsanleitung

Viessmann

Viessmann Vitomax HS M73 Schulungshandbuch

Viessmann

Viessmann VITOFLEX 300-UF Installations- und Benutzerhandbuch

Viessmann

Viessmann ECV Series Kurzanleitung

Viessmann

Viessmann Vitorond 100 Bedienungsanleitung

Viessmann

Viessmann Vitoflex 300-RF 150 Installations- und Benutzerhandbuch

Viessmann

Viessmann Vitodens 200-W System Betriebsanleitung

Viessmann

Viessmann Vitocrossal 300 CU3A 26 Bedienungsanleitung

Viessmann

Viessmann Vitodens 200 WB2 11-44 Bedienungsanleitung

Viessmann

Viessmann VITODENS 200 WB2 Series Gebrauchsanweisung

Viessmann

Viessmann VITOPEND Bedienungsanleitung

Viessmann

Viessmann VITODENS Kurzanleitung

Viessmann

Viessmann Vitodens 100 Kurzanleitung

Viessmann

Viessmann Vitocrossal 200 Series Betriebsanleitung

Viessmann

Viessmann Vitodens 100-W WB1A Series Leitfaden

Viessmann

Viessmann VITODENS 333 Betriebsanleitung

Viessmann

Viessmann VITODENS 050-W Bedienungsanleitung

Viessmann

Viessmann Vitocrossal 300 CT3 SERIES Kurzanleitung

Viessmann

Viessmann VITOCROSSAL 300 Bedienungsanleitung

Viessmann

Viessmann VITOROND 200 VD2A-125 Bedienungsanleitung

Viessmann

Viessmann VITODENS 200 WB2 Series Leitfaden

Viessmann

Viessmann VITODENS 050-W Bedienungsanleitung

Beliebte Kessel Handbücher anderer Marken

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Bedienungsanleitung

Radijator

Radijator BIO max 23.1 Bedienungsanleitung

Brunner

Brunner BSV 20 Bedienungsanleitung

Buderus

Buderus Logamax GB062-24 KDE H V2 Bedienungsanleitung

Potterton

Potterton 50e Datenblatt

UTICA BOILERS

UTICA BOILERS TriFire Bedienungsanleitung

Joannes

Joannes LADY Series Handbuch

ECR International

ECR International UB90-125 Gebrauchsanweisung

Froling

Froling FHG Turbo 3000 Bedienungsanleitung

Froling

Froling P4 Pellet 8 - 105 Bedienungsanleitung

U.S. Boiler Company

U.S. Boiler Company K2 Bedienungsanleitung

Henrad

Henrad C95 FF Bedienungsanleitung

NeOvo

NeOvo EcoNox EF 36 Bedienungsanleitung

Potterton

Potterton PROMAX SL 12 Bedienungsanleitung

Eco Hometec

Eco Hometec EC 25 COMPACT Bedienungsanleitung

Baxi

Baxi Prime 1.24 Bedienungsanleitung

REXNOVA

REXNOVA ISA 20 BITHERMAL Bedienungsanleitung

Radiant

Radiant R2K 55 Handbuch