Viessmann Vitodens 200-W System Gebrauchsanweisung

Technical Data Manual

VITODENS

200-W

5461 883 - 02 04/2015

Model Nos. and pricing: see Price List

For Natural Gas and Liquid Propane Gas

Gas-fired wall-mounted condensing boiler

12 to 125 MBH (3.5 to 37 kW)

Product may not be exactly as shown

Vitodens 200-W

Series B2HB, Models 19, 26 and 35

Gas-Fired Wall-Mounted Condensing Boiler

with modulating MatriX cylinder burner for

room air independent operation (using a

direct vent system) or room air dependent

operation.

Vitodens 200-W, B2HB 19 to 35 Technical Data

5461 883 - 02

Product Information

Vitodens 200-W

Equipped with the industry’s first intelligent combustion

management system and powerful control technology,

the new generation Vitodens 200-W gas-fired wall-mount

condensing boiler delivers unparalleled performance,

reliability and comfort.

The benefits at a glance:

■ Best value in its class with new industry-leading

technology and the most standard features.

■ Highest Efficiency up to 98% at full modulation and up

to 95% A.F.U.E.

■ Lasting performance with industry-leading Viessmann

made SA240 316 Ti stainless steel Inox-Radial heat

exchanger constructed to CSA B51 and ASME Section IV.

■ Low Emission Combustion with Viessmann made

stainless steel MatriX cylinder burner. Factory calibrated.

■ Fast Installation and Reduced Maintenance with Lambda

Pro, industry-first intelligent combustion management

system: Adjusts automatically to gas type and quality.

No fuel conversion kit required.

■ Powerful and User-friendly

Viessmann Vitotronic on-board multi-function outdoor

reset boiler and system control for multi-temperature

space and DHW heating.

■ Greater Venting Flexibility with increased vent length

up to 180 ft. (55 m) and multiple venting options.

- Horizontal or vertical sealed combustion coaxial

venting (field supplied).

- Horizontal, vertical or hybrid sealed combustion

double-pipe venting (field supplied).

- Horizontal or vertical single-wall venting (field

supplied).

■ Compact, Esthetic Product Design and zero clearance

to combustibles.

■ Extremely Quiet Operation; quieter than most

refrigerators.

■ True High-Altitude Operation up to 10,000 ft. (3,000 m)

with simple electronic adjustment.

■ Efficiency up to 98% through intensive condensation.

The flue gas temperature is only approximately 9-27ºF

(5-15ºC) above boiler return temperature (see chart

below).

Vitodens 200-W, B2HB 19 to 35 Technical Data

5461 883 - 02

Product Information

Cross-Section

Product may not be exactly as shown

The flue gas temperature is only approximately 9-27ºF

(5-15ºC) above boiler return temperature (see chart

below).

AInox-Radial heat exchanger made from stainless steel

– for high operational reliability and a long service life.

Large heating output in the smallest of spaces

B Modulating MatriX cylinder burner for extremely

clean combustion and quiet operation

CVariable speed combustion fan for quiet and

economical operation

DGas and water connections

EDigital boiler control unit

Delivered condition

Wall mounted gas condensing boiler with Inox-Radial heat

exchanger, modulating MatriX cylinder burner for natural

gas and LPG, plus wall mounting bracket. Vitotronic 200

for weather-compensated operation. Preset for operation

with natural gas. Fully plumbed and wired. White epoxy-

coated casing.

Vitodens 200-W B2HB 19, 26, 35

Vitodens 200-W, B2HB 19 to 35 Technical Data

5461 883 - 02

Technical Data

Boiler Model No. 200-W B2HB 19 26 35

Natural Gas / Liquid Propane Gas

CSA input

CSA output/DOE *1

heating capacity

Net AHRI rating *2

MBH

(kW)

MBH

(kW)

MBH

(kW)

12-68

(3.5-20)

11-64

(3.2-19)

(16)

19-94

(5.5-27)

18-89

(5-26)

76.5

(22)

19-125

(5.5-37)

18-117

(5-34)

102

(30)

Heat exchanger surface area ft.2

(m2)

12.96

(1.2)

12.96

(1.2)

12.96

(1.2)

Min. gas supply pressure

Natural gas

Liquid propane gas

“w.c.

Max. gas supply pressure *3

Natural gas

Liquid propane gas

“w.c.

A.F.U.E. % 95 95 95

Weight lbs

(kg)

110

(50)

110

(50)

110

(50)

Boiler water content USG

(L)

1.02

(3.88)

1.02

3.88)

1.02

3.88)

Boiler max. flow rate *4 GPM

(L/h)

6.2

(1400)

6.2

(1400)

6.2

(1400)

Max. operating pressure

at 210ºF (99ºC)

psig

(bar)

(3)

Boiler water temperature

- Adjustable high limit (AHL) range

space heating (steady state)

DHW production

- Fixed high limit (FHL)

ºF

(ºC)

ºF

(ºC)

ºF (ºC)

68 to 165

(20 to 74)

165

(74)

210 (99)

68 to 165

(20 to 74)

165

(74)

210 (99)

68 to 165

(20 to 74)

165

(74)

210 (99)

Boiler connections

Boiler heating supply and return

Pressure relief valve

Drain valve

Boiler supply/return for

indirect-fired DHW storage tank

(field supplied)

Gas valve connection

NPTM”

NPTF”

(male

thread)

NPT”

NPTF”

*1 Output based on 140ºF (60ºC), 120ºF (49ºC) system supply/return temperature.

*2 Net AHRI rating based on piping and pick-up allowance of 1.15.

*3 If the gas supply pressure exceeds the maximum gas supply pressure value, a separate gas pressure regulator

must be installed upstream of the heating system.

*4 See “Waterside Flow” starting on page 8 in this manual.

Vitodens 200-W, B2HB 19 to 35 Technical Data

5461 883 - 02

Technical Data

Boiler Model No. 200-W B2HB 19 26 35

Dimensions

Overall depth

Overall width

Overall height

inches

(mm)

inches

(mm)

inches

(mm)

15.7

(400)

17¾

(450)

(1040)

15.7

(400)

17¾

(450)

(1040)

15.7

(400)

17¾

(450)

(1040)

Flue gas *5

Temperature (at boiler return

temperature of 86ºF (30ºC)

- at rated full load

- at rated partial load

Temperature (at boiler return

temperature of 140ºF (60ºC)

ºF (ºC)

113 (45)

95 (35)

154 (68)

113 (45)

95 (35)

154 (68)

113 (45)

95 (35)

154 (68)

Max. condensate flow rate *6

with natural gas and

TS/TR=122/86ºF (50/30ºC) USG/h

(L/h)

0.66

(2.5)

0.97

(3.7)

1.21

(4.6)

Condensate connection *7 hose

nozzle

Ø in ¾-1¾-1¾-1

Boiler flue gas connection *8 Ø

in (mm) 23/8(60) 23/8(60) 23/8(60)

Combustion air supply

connection (coaxial)

outer

Ø in (mm) 4 (100) 4 (100) 4 (100)

Sound Rating

- at maximum input

- at minimum input

dB 41

*5 Measured flue gas temperature with a combustion air temperature of 68°F (20°C).

*6 Based on maximum input rate.

*7 Requires 1 inch (25 mm) tubing. See the Installation Instructions of the Vitodens 200-W, B2HB for details.

*8 For side wall vent installations (coaxial system):

Do not exceed max. equivalent length specified in the Installation Instructions of the Vitodens 200-W, B2HB

Venting System.

Do not attempt to common-vent Vitodens 200-W with any other appliance.

Side wall co-axial vent installation must include Viessmann protective screen!

For details refer to the Installation Instructions for the Vitodens 200-W, B2HB Venting System.

For information regarding other Viessmann System Technology componentry, please reference documentation

of respective product.

Note: For high altitude installation at 10,000 ft. the input for model B2HB 19 to 35 will have an altitude

de-ration of 21%.

Vitodens 200-W, B2HB 19 to 35 Technical Data

5461 883 - 02

Dimensional Information

Models 200-W, B2HB 19, 26, 35

Legend

ABoiler Supply

BGas Connection, ¾” NPTF

C Boiler Return

D Recommended height (single boiler system)

E Condensate drain

FCombustion air intake (left or right)

G Combustion air intake (through co-axial)

Vitodens 200-W, B2HB 19 to 35 Technical Data

5461 883 - 02

Minimum Clearances

Recommended Minimum Service Clearances

Minimum Clearances to Combustibles

AL= Alcove

CL= Closet

*1 Refer to the Installation Instructions of the Vitodens

200-W, B2HB Venting System for details.

Note:The Vitodens boiler has passed the zero inches

vent clearance to combustibles testing requirements

dictated by the Harmonized Standard ANSI Z21.13.

CSA 4.9.2000 and therefore is listed for zero

clearance to combustibles when vented with a

single wall special venting system (AL-29-4C

material). The zero inches vent clearance to

combustibles for the Vitodens boiler supercedes

the clearance to combustibles listing that appears

on the special venting system label.

Top Front Rear Left Right Vent

pipe *1

0 0 AL, CL 0 0 0 0

Vitodens 200-W, B2HB 19 to 35 Technical Data

5461 883 - 02

Typical System Flow Rates

Waterside Flow

Waterside Flow (primary circuit)

Boiler maximum flow rate 6.2 GPM (1400 L/h)

The Vitodens 200-W, B2HB is designed for closed loop,

forced circulation hot water heating systems only. Use

standard friction loss method for pipe sizing. Observe

boiler maximum and minimum flow rate limitations. If

system flow rate exceeds boiler maximum flow rate

(as stated above), falls below the minimum flow rate

or if system flow rate is unknown, Viessmann strongly

recommends the installation of a low-loss header.

An alternative method may be used, such as primary

secondary piping using closely spaced tees.

A low-loss header offers additional benefits not provided

by a pair of closely spaced tees. Viessmann therefore

strongly recommends and prefers the use of a low-loss

header over closely spaced tees. See pages 25 and 26

for low-loss header information. Once the low-loss header

is connected, the built-in low-loss header logic of the

Vitodens 200-W boiler ensures the required rt across the

system through the sensory communication between the

low-loss header and the boiler.

Model B2HB 26 1 boiler

Output (NG/LPG)

MBH 88

rt for NG/LPG

20ºF (11ºC) rise GPM (L/h) 8.8 (1999)

25ºF (14ºC) rise GPM (L/h) 7.0 (1599)

30ºF (17ºC) rise GPM (L/h) 5.9 (1332)

35ºF (19.5ºC) rise GPM (L/h) 5.0 (1142)

40ºF (22ºC) rise GPM (L/h) 4.4 (999)

Pressure drop (primary circuit) for

Vitodens 200-W, B2HB 19, 26, 35

For sizing an on-site circulation system.

Max. flow rate: 6.2 GPM (1400 L/h)

Model B2HB 19 1 boiler

Output (NG/LPG)

MBH 64

rt for NG/LPG

20ºF (11ºC) rise GPM (L/h) 6.4 (1453)

25ºF (14ºC) rise GPM (L/h) 5.1 (1163)

30ºF (17ºC) rise GPM (L/h) 4.3 (969)

35ºF (19.5ºC) rise GPM (L/h) 3.7 (830)

40ºF (22ºC) rise GPM (L/h) 3.2 (727)

Model B2HB 35 1 boiler

Output (NG/LPG)

MBH 117

rt for NG/LPG

20ºF (11ºC) rise GPM (L/h) 11.7 (2657)

25ºF (14ºC) rise GPM (L/h) 9.4 (2126)

30ºF (17ºC) rise GPM (L/h) 7.8 (1771)

35ºF (19.5ºC) rise GPM (L/h) 6.7 (1518)

40ºF (22ºC) rise GPM (L/h) 5.9 (1328)

Flow rate

Supply head pressure (water)

Vitodens 200-W, B2HB 19 to 35 Technical Data

5461 883 - 02

System Flow Rates

Heating Circuit / Boiler Pumps

Viessmann offers a variety of Grundfos heating circuit/

boiler pumps which meet typical Vitodens system

installation requirements (see “Heating circuit pump

(field supplied)” or “Boiler pump (field supplied)” in the

Installation Examples starting on page 28). See tables

below for recommended pumps. Refer to the graph

on page 8 for the proper waterside boiler friction loss

calculations. The following pumps have been selected

based on boiler heat exchanger head loss and boiler piping

to a low-loss header.

IMPORTANT

Pump selection must be based on accurate system flow

and pressure drop calculations (includes DHW sizing).

Model B2HB 19 B2HB 26 B2HB 35

Flow rate

20ºF rt GPM (L/h) 6.4 (1453) -- --

25ºF rt GPM (L/h) 5.1 (1163) -- --

30ºF rt GPM (L/h) 4.3 (969) 5.9 (1332) --

35ºF rt GPM (L/h) 3.7 (830) 5.0 (1142) --

40ºF rt GPM (L/h) 3.2 (727) 4.4 (999) 5.9 (1328)

Flow limitation GPM (L/h) 6.2 (1400) 6.2 (1400) 6.2 (1400)

Recommended boiler pumps Grundfos UPS 15-58 (3-speed), Taco 0015, Wilo Star S 21 FX

Before using the following pumps for a DHW tank

application, find out the proper pressure drop through the

tank, the required temperature difference through the coil

and system piping head loss of the domestic hot water.

Low-Loss Header Application

Sizing of Low-Loss Header in a Residential Single-Boiler Application

*1For system rt < 20° F use low-loss header sizes for rt 20° F.

*2Low-Loss temperature sensor - is included with the boiler for use in a single boiler application.

Boiler

Model

No. of

Boilers

Boiler

Max.

Flow

Rate

GPM

(L/h)

Typical System Flow Rates Viessmann

Low-loss

Temp.

Sensor

Required*2

rt*1 °F

(°C)

(11.0)

(14.0)

(17.0)

(19.5)

(22.0)

B2HB

1 6.2

(1400)

System Flow

Rate

LLH Required

LLH Model

GPM

(L/h)

6.4

(1453)

Yes

80/60

5.1

(1163)

Optional

80/60

4.3

(969)

Optional

80/60

3.7

(830)

Optional

80/60

3.2

(727)

Optional

80/60

Included

B2HB

1 6.2

(1400)

System Flow

Rate

LLH Required

LLH Model

GPM

(L/h)

8.8

(1999)

Yes

80/60

7.0

(1599)

Yes

80/60

5.9

(1332)

Optional

80/60

5.0

(1142)

Optional

80/60

4.4

(999)

Optional

80/60

Included

B2HB

1 6.2

(1400)

System Flow

Rate

LLH Required

LLH Model

GPM

(L/h)

11.7

(2657)

Yes

80/60

9.4

(2126)

Yes

80/60

7.8

(1771)

Yes

80/60

6.7

(1518)

Yes

80/60

5.9

(1328)

Optional

80/60

Included

Vitodens 200-W, B2HB 19 to 35 Technical Data

5461 883 - 02

DHW Production

Domestic Hot Water Production

Legend

DR Boiler heating return for domestic hot water

production

DS Boiler heating supply for domestic hot water

production

HR Heating Return

HS Heating Supply

BD Boiler Drain

BR Boiler Return

BS Boiler Supply

GC Gas Connection

PRV Pressure Relief Valve

BF Boiler Fill

PG Pressure Gage (not shown)

*1See page 45 for alternate DHW connection.

*2Temperature guage

An adequately sized pre-charged expansion tank must be

used. See Installation Examples for details.

IMPORTANT

Vitodens 200-W boilers can be used in conjunction

with the stand-alone DHW storage tanks offered by

Viessmann.

All Viessmann DHW storage tanks sold in North America

are available in “Vitosilver” finish only.

Size and select the DHW storage tank based on the

forecasted DHW consumption of the building in question.

For further technical information on DHW storage tanks,

see the Vitocell-V Technical Data Manuals.

For the connection of a stand-alone DHW tank, installation

fittings (field supplied), an external circulating pump for

DHW production (field supplied) and a DHW temperature

sensor (optional equipment, see Viessmann Price List for

order information) are required.

Note:Install the temperature guage (supplied) anywhere

in the supply piping near the boiler (not shown).

*1DHW

Connections

(Field Supplied)

Andere Handbücher für Vitodens 200-W System

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Viessmann Kessel Handbücher

Viessmann

Viessmann VITOLIGNO 300-H Series Bedienungsanleitung

Viessmann

Viessmann Vitolig 300 Betriebsanleitung

Viessmann

Viessmann VITODENS 200 WB2 Series Bedienungsanleitung

Viessmann

Viessmann VITOCROSSAL 200 Gebrauchsanweisung

Viessmann

Viessmann Vitodens 200-W System Bedienungsanleitung

Viessmann

Viessmann Vitodens 111-W Kurzanleitung

Viessmann

Viessmann B2HA 80 Bedienungsanleitung

Viessmann

Viessmann Vitocell 340-M Betriebsanleitung

Viessmann

Viessmann VITOGAS Kurzanleitung

Viessmann

Viessmann VITOCELL 300-H Bedienungsanleitung

Viessmann

Viessmann Vitodens 100-W B1HA Benutzerhandbuch

Viessmann

Viessmann Vitodens 300 Bedienungsanleitung

Viessmann

Viessmann VITOCROSSAL 300 Betriebsanleitung

Viessmann

Viessmann Vitoplex 100-LS SXD Bedienungsanleitung

Viessmann

Viessmann Vitodens 200-W System Betriebsanleitung

Viessmann

Viessmann Vitodens 200-W 19 WB2B Series Bedienungsanleitung

Viessmann

Viessmann VITODENS 333 Betriebsanleitung

Viessmann

Viessmann VITOLIGNO 300-C Kurzanleitung

Viessmann

Viessmann Vitosorp 200-F Bedienungsanleitung

Viessmann

Viessmann Vitodens 200-W System Betriebsanleitung

Viessmann

Viessmann VITODENS 050-W Bedienungsanleitung

Viessmann

Viessmann VITODENS 333 Betriebsanleitung

Viessmann

Viessmann VITODENS Bedienungsanleitung

Viessmann

Viessmann Vitoladens 300-C Kurzanleitung

Beliebte Kessel Handbücher anderer Marken

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Bedienungsanleitung

Radijator

Radijator BIO max 23.1 Bedienungsanleitung

Brunner

Brunner BSV 20 Bedienungsanleitung

Buderus

Buderus Logamax GB062-24 KDE H V2 Bedienungsanleitung

Potterton

Potterton 50e Datenblatt

UTICA BOILERS

UTICA BOILERS TriFire Bedienungsanleitung

Joannes

Joannes LADY Series Handbuch

ECR International

ECR International UB90-125 Gebrauchsanweisung

Froling

Froling FHG Turbo 3000 Bedienungsanleitung

Froling

Froling P4 Pellet 8 - 105 Bedienungsanleitung

U.S. Boiler Company

U.S. Boiler Company K2 Bedienungsanleitung

Henrad

Henrad C95 FF Bedienungsanleitung

NeOvo

NeOvo EcoNox EF 36 Bedienungsanleitung

Potterton

Potterton PROMAX SL 12 Bedienungsanleitung

Eco Hometec

Eco Hometec EC 25 COMPACT Bedienungsanleitung

Baxi

Baxi Prime 1.24 Bedienungsanleitung

REXNOVA

REXNOVA ISA 20 BITHERMAL Bedienungsanleitung

Radiant

Radiant R2K 55 Handbuch