Viessmann VITOLIGNO 300-P Betriebsanleitung

Service instructions

for contractors

VIESMANN

Vitoligno 300-P

Type VL3B

Pellet boiler

For applicability, see the last page

VITOLIGNO 300-P

5692 805 GB 4/2009 Please keep safe.

Please follow these safety instructions closely to prevent accidents and mate-

rial losses.

Safety instructions explained

Danger

This symbol warns against the

risk of injury.

!Please note

This symbol warns against the

risk of material losses and envi-

ronmental pollution.

Note

Details identified by the word "Note" con-

tain additional information.

Target group

These instructions are exclusively

designed for qualified personnel.

■ Work on gas equipment must only be

carried out by a qualified gas fitter.

■ Work on electrical equipment must

only be carried out by a qualified elec-

trician.

■ The system must be commissioned by

the system installer or a qualified per-

son authorised by the installer.

Regulations

Observe the following when working on

this system

■ all legal instructions regarding the pre-

vention of accidents,

■ all legal instructions regarding envi-

ronmental protection,

■ the Code of Practice of relevant trade

associations,

■ all current safety regulations as

defined by DIN, EN, DVGW, TRGI,

TRF, VDE and all locally applicable

standards,

■ Gas Safety (Installation & Use) Regu-

lations

– the appropriate Building Regulation

either the Building regulations, the

Building Regulation (Scotland),

Building Regulations (Northern Ire-

land),

– the Water Fittings Regulation or

Water Bylaws in Scotland,

– the current I.E.E. Wiring Regula-

tions.

If you smell gas

Danger

Escaping gas can lead to explo-

sions which may result in serious

injury.

■ Never smoke. Prevent naked

flames and sparks. Never

switch lights or electrical appli-

ances ON or OFF.

■ Close the gas shut-off valve.

■ Open windows and doors.

■ Remove all people from the

danger zone.

■ Notify your gas or electricity

supplier from outside the build-

ing.

■ Shut off the electricity supply to

the building from a safe place

(outside the building).

Safety instructions

5692 805 GB

If you smell flue gas

Danger

Flue gas can lead to life-threat-

ening poisoning.

■ Shut down the heating system.

■ Ventilate the boiler room.

■ Close all doors leading to the

living space.

Working on the system

■ When using gas as fuel, also close the

main gas shut-off valve and safeguard

against unauthorised reopening.

■ Isolate the system from the power sup-

ply and check that it is no longer 'live',

e.g. by removing a separate fuse or by

means of a main isolator.

■ Safeguard the system against unau-

thorised reconnection.

!Please note

Electronic modules can be dam-

aged by electro-static dis-

charges.

Touch earthed objects, such as

heating or water pipes, to dis-

charge static loads.

Repair work

!Please note

Repairing components which ful-

fil a safety function can compro-

mise the safe operation of your

heating system.

Replace faulty components only

with original Viessmann spare

parts.

Ancillary components, spare and

wearing parts

!Please note

Spare and wearing parts which

have not been tested together

with the heating system can com-

promise its function. Installing

non-authorised components and

non-approved modifications/con-

version can compromise safety

and may invalidate our warranty.

For replacements, use only orig-

inal spare parts from Viessmann

or those which are approved by

Viessmann.

Safety instructions

Safety instructions (cont.)

5692 805 GB

Commissioning, inspection, maintenance

Steps - commissioning, inspection and maintenance.......................................... 5

Further details regarding the individual steps....................................................... 6

Codes

Resetting codes to their delivered condition......................................................... 44

Code 1.................................................................................................................. 44

Code 2.................................................................................................................. 50

Service scans

Service functions.................................................................................................. 70

Temperatures, boiler coding card and brief scans............................................... 70

Scanning operating conditions and sensors ........................................................ 75

Troubleshooting

Fault display......................................................................................................... 76

Repairs................................................................................................................. 85

Function description

Display and control elements............................................................................... 103

Control functions.................................................................................................. 103

Vacuum supply system........................................................................................ 118

Pellet combustion sequence chart....................................................................... 119

Designs

Connection and wiring diagram............................................................................ 121

Parts lists............................................................................................................ 126

Commissioning/service reports........................................................................ 136

Specification....................................................................................................... 137

Certificates

Declaration of conformity...................................................................................... 139

Keyword index.................................................................................................... 140

Index

5692 805 GB

For further information regarding the individual steps, see the page indicated

Commissioning steps

Inspection steps

Maintenance steps Page

•1. Fill heating system......................................................... 6

••• 2. Checking all connections on the heating water side

for leaks

•3. Switching the power ON................................................ 6

•4. Language selection........................................................ 10

• • 5. Setting the time and date............................................... 11

•6. Configuring the supply system..................................... 11

•7. Commissioning the supply system.............................. 11

•8. Setting delivery times for fuel supply........................... 12

•9. Matching the control unit to the heating system ........ 12

•10. Checking outputs (actuators) and sensors.................. 29

•11. Adjusting the heating curves........................................ 31

•12. Integrating a control unit into the LON......................... 34

• • 13. Shutting down the system............................................. 36

• • 14. Cleaning the combustion chamber............................... 37

•15. Cleaning the secondary heating surfaces.................... 38

•16. Cleaning the flue gas fan and the Lambda probe........ 39

• • 17. Emptying the ash container (if required)...................... 40

• • 18. Checking the diaphragm expansion vessel and

system pressure............................................................. 41

••• 19. Checking the function of safety valves

•20. Display "Maintenance"................................................... 42

•21. Instructing the system user........................................... 43

Commissioning, inspection, maintenance

Steps - commissioning, inspection and maintenance

5692 805 GB

Fill heating system

1. Check the pre-charge pressure of the

diaphragm expansion vessel.

If the pre-charge pressure of the dia-

phragm expansion vessel is lower

than the static system pressure, top

up with nitrogen until the pre-charge

pressure has risen by 0.1 to 0.2 bar.

Adjust the pre-charge pressure

accordingly if it is too high.

2. Open the check valves.

3. Top up your heating system with

water and vent until the filling pres-

sure is 0.1 to 0.2 bar higher than the

pre-charge pressure of the dia-

phragm expansion vessel.

Permiss. operating pressure: 3 bar

Test pressure: 4 bar

4. Mark this pressure at pressure gauge

5. Return the check valves to their oper-

ating position.

Switching the power ON

After switching the power ON, a start-up sequence commences:

■ Select language

■ Set time and date

■ Supply system configuration

■ Supply system commissioning

When configuring the supply system, the

following are available for selection:

Commissioning, inspection, maintenance

Further details regarding the individual steps

5692 805 GB

– "only holding hopper" for pellet sup-

ply from the boiler hopper only (not

shown).

– "Suction system" for pellet supply via

auger discharge from the pellet storage

room and onward transportation via a

vacuum system:

Commissioning, inspection, maintenance

Further details regarding the individual steps (cont.)

5692 805 GB

– "Auger system" for pellet supply from

the pellet storage room via an auger sys-

tem:

Commissioning, inspection, maintenance

Further details regarding the individual steps (cont.)

5692 805 GB

– "Suction system + silo" for pellet

supply from a pellet silo via a vacuum

system:

Commissioning, inspection, maintenance

Further details regarding the individual steps (cont.)

5692 805 GB

– "Auger + silo" for pellet supply from a

pellet silo via an auger system:

– "Suction sys. + mole" Available

later.

Menu structure overview:

Vitoligno operating instructions

Language selection

Shortly after switching the power ON, the

display shows "Select language".

Press the following keys:

1. |/~for the required language.

Commissioning, inspection, maintenance

Further details regarding the individual steps (cont.)

5692 805 GB

Andere Handbücher für VITOLIGNO 300-P

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Viessmann Kessel Handbücher

Viessmann

Viessmann VITOCROSSAL 200 Gebrauchsanweisung

Viessmann

Viessmann VITOCROSSAL 300 Bedienungsanleitung

Viessmann

Viessmann EVO-COOL Series Bedienungsanleitung

Viessmann

Viessmann VITOCELL 300-H Gebrauchsanweisung

Viessmann

Viessmann VITOPEND Bedienungsanleitung

Viessmann

Viessmann Vitocrossal 300 CT3 SERIES Betriebsanleitung

Viessmann

Viessmann VITODENS Kurzanleitung

Viessmann

Viessmann Vitotronic 100 GC1 Kurzanleitung

Viessmann

Viessmann B2TF Kurzanleitung

Viessmann

Viessmann VITODENS 200 WB2 Series Gebrauchsanweisung

Viessmann

Viessmann VITODENS 200 Betriebsanleitung

Viessmann

Viessmann VITODENS 050-W Kurzanleitung

Viessmann

Viessmann Vitocrossal 300 CU3A Benutzerhandbuch

Viessmann

Viessmann VITOFLEX 300-UF Betriebsanleitung

Viessmann

Viessmann VITOTRANS 353 Bedienungsanleitung

Viessmann

Viessmann Vitodens 200-W System Gebrauchsanweisung

Viessmann

Viessmann Vitodens 200-W System Kurzanleitung

Viessmann

Viessmann VITOGAS 100 Betriebsanleitung

Viessmann

Viessmann KOB Pyrotec KPT Series Gebrauchsanweisung

Viessmann

Viessmann Vitodens 200-W System Bedienungsanleitung

Viessmann

Viessmann Vitorond 100 Betriebsanleitung

Viessmann

Viessmann Vitorond 100 Gebrauchsanweisung

Viessmann

Viessmann VITOLADENS333-F Betriebsanleitung

Viessmann

Viessmann VITOCELL 300B Betriebsanleitung

Beliebte Kessel Handbücher anderer Marken

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Bedienungsanleitung

Radijator

Radijator BIO max 23.1 Bedienungsanleitung

Brunner

Brunner BSV 20 Bedienungsanleitung

Buderus

Buderus Logamax GB062-24 KDE H V2 Bedienungsanleitung

Potterton

Potterton 50e Datenblatt

UTICA BOILERS

UTICA BOILERS TriFire Bedienungsanleitung

Joannes

Joannes LADY Series Handbuch

ECR International

ECR International UB90-125 Gebrauchsanweisung

Froling

Froling FHG Turbo 3000 Bedienungsanleitung

Froling

Froling P4 Pellet 8 - 105 Bedienungsanleitung

U.S. Boiler Company

U.S. Boiler Company K2 Bedienungsanleitung

Henrad

Henrad C95 FF Bedienungsanleitung

NeOvo

NeOvo EcoNox EF 36 Bedienungsanleitung

Potterton

Potterton PROMAX SL 12 Bedienungsanleitung

Eco Hometec

Eco Hometec EC 25 COMPACT Bedienungsanleitung

Baxi

Baxi Prime 1.24 Bedienungsanleitung

REXNOVA

REXNOVA ISA 20 BITHERMAL Bedienungsanleitung

Radiant

Radiant R2K 55 Handbuch