Viessmann VITOTRONIC 100 Kurzanleitung
VIESMANN
Installation and service
instructions
for contractors
Vitotronic 100
Type KC2
Electronic boiler control unit
For applicability, see the last page
VITOTRONIC 100
5862 698 GB 02/2005 Please keep safe.
Please follow these safety instructions closely to prevent accidents and
material losses.
Safety instructions explained
Danger
This symbol warns against the
risk of injury.
!Please note
This symbol warns against the
risk of material losses and
environmental pollution.
Note
Details identified by the word "Note"
contain additional information.
Target group
These instructions are exclusively
designed for qualified personnel.
&Work on gas equipment must only
be carried out by a qualified gas fit-
ter.
&Work on electrical equipment must
only be carried out by a qualified
electrician.
&The system must be commissioned
by the system installer or a qualified
person authorised by the installer.
Regulations
Observe the following when working
on this system
&all legal instructions regarding the
prevention of accidents,
&all legal instructions regarding
environmental protection,
&the Code of Practice of relevant
trade associations,
&all current safety regulations as
defined by DIN, EN, DVGW, TRGI,
TRF, VDE and all locally applicable
standards.
If you smell gas
Danger
Escaping gas can lead to
explosions which may result in
serious injury.
&Never smoke. Prevent naked
flames and sparks. Never
switch lights or electrical
appliances ON or OFF.
&Close the gas shut-off valve.
&Open windows and doors.
&Remove all people from the
danger zone.
&Notify your gas or electricity
supplier from outside the
building.
&Shut off the electricity supply
to the building from a safe
place (outside the building).
If you smell flue gas
Danger
Flue gas can lead to life-threa-
tening poisoning.
&Shut down the heating sys-
tem.
&Ventilate the boiler room.
&Close all doors leading to the
living space.
Safety instructions
2
Safety instructions
5862 698 GB
Working on the system
&When using gas as fuel, also close
the main gas shut-off valve and
safeguard against unauthorised
reopening.
&Isolate the system from the power
supply and check that it is no longer
'live', e.g. by removing a separate
fuse or by means of a main isolator.
&Safeguard the system against
unauthorised reconnection.
!Please note
Electronic modules can be
damaged by electro-static dis-
charges.
Touch earthed objects, such as
heating or water pipes, to dis-
charge static loads.
Repair work
!Please note
Repairing components which
fulfil a safety function can com-
promise the safe operation of
your heating system.
Replace faulty components
only with original Viessmann
spare parts.
Ancillary components, spare and
wearing parts
!Please note
Spare and wearing parts which
have not been tested together
with the heating system can
compromise its function. Instal-
ling non-authorised compo-
nents and non-approved
modifications/conversion can
compromise safety and may
invalidate our warranty.
For replacements, use only ori-
ginal spare parts from
Viessmann or those which are
approved by Viessmann.
Safety instructions (cont.)
3
Safety instructions
5862 698 GB
Installation instructions
Preparing for installation
Heating system design................................................................................ 6
Installation sequence
Summary of electrical connections.............................................................. 7
Inserting cables and applying strain relief.................................................... 8
Changing the high limit safety cut-out setting (if required) ............................ 9
Changing the control thermostat setting (if required).................................... 10
Inserting the boiler coding card ................................................................... 12
Low voltage connections............................................................................. 13
Pump connection........................................................................................ 13
External connection to plug X12.................................................................. 15
Burner connection ...................................................................................... 15
Power supply.............................................................................................. 17
Fitting the top part of the control unit ........................................................... 19
Opening the control unit .............................................................................. 20
Service instructions
Commissioning, inspection, maintenance............................................... 20
Commissioning
Display and operating controls .................................................................... 21
Testing the high limit safety cut-out ............................................................. 22
Matching up coding addresses.................................................................... 22
Checking outputs (actuators) and sensors................................................... 22
Service scans
Service level summary ............................................................................... 24
Brief scans ................................................................................................. 24
Operating conditions................................................................................... 25
Troubleshooting
Checking and acknowledging faults ............................................................ 27
Calling up fault codes from the fault memory (fault history) .......................... 29
Faults that are not displayed at the programming unit .................................. 30
Function description
Boiler water temperature control ................................................................. 32
Heating circuit control ................................................................................. 33
Cylinder temperature control....................................................................... 34
Index
4
Index
5862 698 GB
Coding
Calling up coding levels .............................................................................. 37
Resetting codes to the delivered condition .................................................. 37
Coding summary......................................................................................... 37
Burner switching hysteresis ........................................................................ 41
Designs
Connection and wiring diagram ................................................................... 43
Components
Room thermostat Vitotrol 100, type UTD ..................................................... 45
Boiler coding card....................................................................................... 45
Vitoair draught stabiliser ............................................................................. 46
Components from the parts list.................................................................... 47
Parts lists .................................................................................................. 52
Specification............................................................................................. 55
Settings and equipment............................................................................ 56
Keyword index .......................................................................................... 58
Index (cont.)
5
Index
5862 698 GB
System version
One directly connected heating circuit without mixer
ABoiler with Vitotronic 100
BDHW cylinder
CHeating circuit without mixer
Plug
§Boiler water temperature sensor
%Cylinder temperature sensor
sÖ Heating circuit pump (acces-
sories)
sA Cylinder primary pump (acces-
sories)
fÖ Power supply (230 V/50 Hz)
fA Burner stage 1
lÖ Burner stage 2
a-D Room thermostat Vitotrol 100
(type UTD) (accessories)
a:A Two-stage burner extension
Required coding
02:1 for two-stage burner operation
(requires the two-stage burner extension)
Automatic changeover
00:2 with DHW cylinder
Heating system design
6
Preparing for installation
5862 698 GB
Plug 230 V~
sÖ Heating circuit pump (acces-
sories)
sA Cylinder primary pump (acces-
sories)
fÖ Power supply
fA Burner stage 1
X12 External burner start (stage 1)
Low voltage plugs
§Boiler water temperature sensor
%Cylinder temperature sensor
a-D Room thermostat Vitotrol 100
(type UTD) (accessories)
a:A Two-stage burner extension
When connecting external switching
contacts or components to the low
voltage circuit of the control unit,
please observe the safety require-
ments of protection class II, i.e.
8.0 mm air gap/creep path or 2.0 mm
insulation thickness towards 'live'
components.
Ensure a safe electrical separation for
all on-site components (incl. PC/lap-
tops) to conform to EN 60 335 or
IEC 65.
Summary of electrical connections
7
Installation sequence
5862 698 GB
Installation
Note
Blank off unnecessary knockouts in
the lower part of the control unit with
cable grommets (not cut out).
Inserting cables and applying strain relief
8
Installation sequence
5862 698 GB
Adjustment to 100 °C (EGO and JUMO)
The high limit safety cut-out is set to 110 °C in the delivered condition.
Note
This EGO setting change is irreversible!
When adjusting the temperature to 100 °C, do not adjust the control thermostat
above 75 °C.
AEGO slotted screw BJUMO slotted screw
Conversion to 100 °C at T&G
The high limit safety cut-out is set to 110 °C in the delivered condition.
Changing the high limit safety cut-out setting (if required)
9
Installation sequence
5862 698 GB
Installation
Note
When adjusting the temperature to 100 °C, do not adjust the control thermostat
above 75 °C.
Changing the control thermostat setting (if required)
Adjustment to 87 °C/ 95 °C
The control thermostat is supplied with a factory setting of 75 °C.
Note
Never set the control thermostat higher than 75 °C if the high limit safety cut-out
has been changed to 100 °C.
Changing the high limit safety cut-out setting (if . . . (cont.)
10
Installation sequence
5862 698 GB
Andere Handbücher für VITOTRONIC 100
14
Inhaltsverzeichnis
Andere Viessmann Steuereinheit Handbücher
Viessmann
Viessmann 5204 Bedienungsanleitung
Viessmann
Viessmann EA1 Kurzanleitung
Viessmann
Viessmann Vitotrol 350-C Bedienungsanleitung
Viessmann
Viessmann 5204 Bedienungsanleitung
Viessmann
Viessmann VITOTRONIC 100 Gebrauchsanweisung
Viessmann
Viessmann VITOTRONIC 300 Gebrauchsanweisung
Viessmann
Viessmann 5559 Anleitungen und Rezepte
Viessmann
Viessmann 5220 Bedienungsanleitung
Viessmann
Viessmann Vitotronic 100 GC1 Leitfaden
Viessmann
Viessmann Vitotronic 100 HC1 Kurzanleitung
Viessmann
Viessmann Cascade control unit Service-Handbuch
Viessmann
Viessmann LB1 Betriebsanleitung
Viessmann
Viessmann 5557 Bedienungsanleitung
Viessmann
Viessmann VITOTRONIC 300 Bedienungsanleitung
Viessmann
Viessmann ViCare Bedienungsanleitung
Viessmann
Viessmann AM1 Bedienungsanleitung
Viessmann
Viessmann 5224 Bedienungsanleitung
Viessmann
Viessmann VITOTRONIC 300 Kurzanleitung
Viessmann
Viessmann BCU Bedienungsanleitung
Viessmann
Viessmann EM-EA1 extension Betriebsanleitung
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
