Viessmann Vitosol 200-T Bedienungsanleitung

Installation instructions

for contractors

VIESMANN

Vitosol 200-T

Type SP2A

Vitosol 300-T

Type SP3B

Vacuum tube collectors according to the heat pipe principle

VITOSOL 200-T

VITOSOL 300-T

5513 758 GB 11/2015 Dispose after installation.

Please follow these safety instructions closely to

prevent accidents and material losses.

Safety instructions explained

Danger

This symbol warns against the risk of injury.

!Please note

This symbol warns against the risk of material

losses and environmental pollution.

Note

Details identified by the word "Note" contain additional

information.

Target group

These instructions are exclusively intended for author-

ised contractors.

■Work on electrical equipment must only be carried

out by a qualified electrician.

Regulations to be observed

■National installation regulations

■Statutory regulations for the prevention of accidents

■Statutory regulations for the protection of the envi-

ronment

■Codes of practice of the relevant trade associations

■All relevant safety regulations as defined by DIN, EN,

DVGW, VDE and locally applicable standards

aÖNORM, EN and ÖVE

cSEV, SUVA, SVTI, SWKI and SVGW

Working on the system

■Isolate the system from the power supply (e.g. by

removing the separate fuse or by means of a mains

isolator) and check that it is no longer 'live'.

■Safeguard the system against reconnection.

Safety instructions

5513 758 GB

1. Information Disposal of packaging ............................................................................ 4

Symbols ................................................................................................. 4

Intended use .......................................................................................... 5

2. Preparing for installation Distribution of fixings on the rafters ....................................................... 6

3. Installation sequence Pitched roof installation with rafter flanges ............................................ 8

■Vertical installation .............................................................................. 8

■Horizontal installation ......................................................................... 11

Pitched roof installation with rafter hooks .............................................. 15

■Fitting the rafter hooks ........................................................................ 16

■Vertical installation .............................................................................. 17

■Horizontal installation (only Vitosol 200-T) ......................................... 20

Pitched roof installation with rafter anchors ........................................... 24

■Fitting rafter anchors ........................................................................... 25

■Vertical installation .............................................................................. 28

■Horizontal installation (only Vitosol 200-T) ......................................... 31

Pitched roof installation with mounting brackets .................................... 34

■Vertical installation .............................................................................. 34

■Horizontal installation (only Vitosol 200-T) ......................................... 38

Pitched roof installation with roof hooks ................................................ 43

■Fitting the roof hooks .......................................................................... 43

■Vertical installation .............................................................................. 44

■Horizontal installation (only Vitosol 200-T) ......................................... 47

Installation on collector supports ........................................................... 50

■Collector supports with fixed angle of inclination ................................ 51

■Collector supports with variable angle of inclination ........................... 54

Level installation (only Vitosol 200-T) .................................................... 57

Installation on walls (only Vitosol 200-T) ............................................... 61

Hydraulic connections ............................................................................ 63

■Connecting the header casing ............................................................ 63

■Fitting the connection set .................................................................... 64

Fitting the vacuum tubes ........................................................................ 65

Fitting the collector temperature sensor ................................................ 66

4. Installation ................................................................................................................ 68

5. Commissioning and

adjustment

................................................................................................................ 70

Index

5513 758 GB

Disposal of packaging

Please dispose of packaging waste in line with statu-

tory regulations.

DE: Use the disposal system organised by

Viessmann.

AT: Use the ARA statutory disposal system (Altstoff

Recycling Austria AG, licence number 5766).

CH: Packaging waste is disposed of by the HVAC

contractor.

Symbols

Symbol Meaning

Reference to other document containing

further information

Step in a diagram:

The numbers correspond to the order in

which the steps are carried out.

Warning of material losses and environ-

mental pollution

Live electrical area

Pay particular attention.

■Component must audibly click into place.

■Acoustic signal

■Fit new component.

■In conjunction with a tool: Clean the sur-

face.

Dispose of component correctly.

Dispose of component at a suitable collec-

tion point. Do not dispose of component in

domestic waste.

Disposal of packaging

5513 758 GB

The appliance is only intended to be installed and

operated in sealed unvented systems that comply with

EN 12828 / DIN 1988, or solar thermal systems that

comply with EN 12977, with due attention paid to the

associated installation, service and operating instruc-

tions. DHW cylinders are only designed to store and

heat water of potable water quality. Heating water buf-

fer cylinders are only designed to hold fill water of pot-

able water quality. Only operate solar collectors with

the heat transfer medium approved by the manufac-

turer.

Intended use presupposes that a fixed installation in

conjunction with permissible, system-specific compo-

nents has been carried out.

Commercial or industrial usage for a purpose other

than heating the building or DHW shall be deemed

inappropriate.

Any usage beyond this must be approved by the man-

ufacturer for the individual case.

Incorrect usage or operation of the appliance (e.g. the

appliance being opened by the system user) is prohibi-

ted and results in an exclusion of liability.

Incorrect usage also occurs if the components in the

system are modified from their intended use (e.g.

through direct DHW heating in the collector).

Adhere to statutory regulations, especially concerning

the hygiene of potable water.

Intended use

5513 758 GB

Fixings:

■Rafter flanges (from page 8)

■Rafter hooks (from page 15)

■Rafter anchors (from page 24)

■Mounting brackets (from page 34)

Each number of collectors and collector combination

has a specific number of fixings allocated to it.

Subject to the spacing between rafters, a specific num-

ber of rafters is used for attaching the fixings.

The following tables detail the rafters to which the fix-

ings should be attached.

Example:

■3 collectors

■Combination comprising 1 x 1.51 m2 and

2 x 3.03 m2

■Rafter spacing 600 mm

Look up the combination in the table for 3 collectors on

page 7 (highlighted grey):

Of the 9 rafters, the following are used:

Rafters 1, 2, 3, 6, 7, 9

74 74

790 790

Fig. 1

Position of fixings

ATube retainer

1 collector

Combination Rafter spacing a in mm Rafters used

1 x 1.51 m2

≤ 600 1, 2

≤ 700 1, 2

≤ 800 1, 2

1 x 3.03 m2

≤ 600 1, 4

≤ 700 1, 3

≤ 800 1, 3

2 collectors

Combination Rafter spacing a in mm Rafters used

1 x 1.51 m2/

1 x 3.03 m2

≤ 600 1, 2, 3, 5

≤ 700 1, 2, 3, 5

≤ 800 1, 2, 3, 4

2 x 3.03 m2

≤ 600 1, 4, 5, 7

≤ 700 1, 3, 4, 6

≤ 800 1, 3, 4, 6

Distribution of fixings on the rafters

5513 758 GB

3 collectors

Combination Rafter spacing a in mm Rafters used

1 x 1.51 m2/

2 x 3.03 m2

≤ 600 1, 2, 3, 6, 7, 9

≤ 700 1, 2, 3, 5, 6, 8

≤ 800 1, 2, 3, 4, 5, 7

3 x 3.03 m2

≤ 600 1, 4, 5, 7, 8, 11

≤ 700 1, 3, 4, 6, 7, 9

≤ 800 1, 3, 4, 6, 7, 8

4 collectors

Combination Rafter spacing a in mm Rafters used

1 x 1.51 m2/

3 x 3.03 m2

≤ 600 1, 2, 3, 5, 6, 9, 12

≤ 700 1, 2, 3, 5, 6, 8, 9, 11

≤ 800 1, 2, 3, 5, 6, 8, 9, 11

4 x 3.03 m2

≤ 600 1, 4, 5, 7, 8, 9, 11, 12, 14

≤ 700 1, 3, 4, 6, 7, 8, 9, 10, 11, 12

≤ 800 1, 3, 4, 6, 7, 8, 9, 11

5 collectors

Combination Rafter spacing a in mm Rafters used

1 x 1.51 m2/

4 x 3.03 m2

≤ 600 1, 2, 3, 6, 7, 9, 10, 13, 14, 16

≤ 700 1, 2, 3, 5, 6, 9, 10, 12, 13, 16

≤ 800 —

5 x 3.03 m2

≤ 600 1, 4, 5, 7, 8, 11, 12, 14, 15, 18

≤ 700 1, 3, 4, 5, 6, 7, 9, 10, 12, 13, 15

≤ 800 1, 3, 4, 6, 7, 8, 11, 12, 13

Distribution of fixings on the rafters (cont.)

5513 758 GB

For plain tiled and slate roofs

1 432

Fig. 2

1Rafter flange

2Seal

3Screws

4Mounting rail for vertical and horizontal installa-

tion

Vertical installation

The vacuum tubes are positioned vertically to the roof

ridge.

2070 190

Fig. 3

The tables from page 6 detail the rafters on which the

rafter flanges should be mounted.

Pitched roof installation with rafter flanges

5513 758 GB

Fig. 4

Fig. 5

90°

Fig. 6

Pitched roof installation with rafter flanges (cont.)

5513 758 GB

90°

Fig. 7

Pitched roof installation with rafter flanges (cont.)

5513 758 GB

Andere Handbücher für Vitosol 200-T

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Viessmann Solarpanel Handbücher

Viessmann

Viessmann Vitosol 200-T Bedienungsanleitung

Viessmann

Viessmann Vitosol 100-FM SV1F Service-Handbuch

Viessmann

Viessmann VITOSOL-F Betriebsanleitung

Viessmann

Viessmann VITOSOL 100-F SV1B Gebrauchsanweisung

Viessmann

Viessmann Vitosol 300-T Bedienungsanleitung

Viessmann

Viessmann VITOSOL-F Bedienungsanleitung

Viessmann

Viessmann VITOSOL-F Bedienungsanleitung

Viessmann

Viessmann Vitosol 200-T Bedienungsanleitung

Viessmann

Viessmann VITOSOL-F Bedienungsanleitung

Viessmann

Viessmann Vitosol-F Series Bedienungsanleitung

Viessmann

Viessmann Vitosol-F Type SV Bedienungsanleitung

Viessmann

Viessmann VITOSOL-F Bedienungsanleitung

Viessmann

Viessmann VITOSOL 100-F SV1 Gebrauchsanweisung

Viessmann

Viessmann VITOSOL 100-F SV Kurzanleitung

Viessmann

Viessmann VITOSOL 200-F Bedienungsanleitung

Viessmann

Viessmann Vitosol 200-T Betriebsanleitung

Viessmann

Viessmann VITOVOLT Betriebsanleitung

Viessmann

Viessmann VITOVOLT 200 5458 Bedienungsanleitung

Viessmann

Viessmann Vitosol 300-T Bedienungsanleitung

Viessmann

Viessmann Vitovolt 200 Betriebsanleitung

Viessmann

Viessmann Vitosol-F Series Bedienungsanleitung

Viessmann

Viessmann VITOSOL 100-F Gebrauchsanweisung

Viessmann

Viessmann Vitosol 300-TM Service-Handbuch

Viessmann

Viessmann Vitosol 200-T Bedienungsanleitung

Beliebte Solarpanel Handbücher anderer Marken

Navitron

Navitron HFC-2 Bedienungsanleitung

AXITEC

AXITEC 60-CELL Bedienungsanleitung

thermital

thermital TSOL 20 N BLU Bedienungsanleitung

AZO Digital

AZO Digital MPPT-3000 Bedienungsanleitung

Clenergy

Clenergy PV-ezRack SolarTripod Bedienungsanleitung

Beretta

Beretta SCF-20N Bedienungsanleitung

moovo

moovo KSM001 Produkthandbuch

solarwatt

solarwatt EasyIn 60M Series Bedienungsanleitung

Solarland

Solarland Portable Series Handbuch

Ubiquiti

Ubiquiti sunMAX Bedienungsanleitung

Lippert

Lippert Furrion FSFP37MW-BL Bedienungsanleitung

Sonnenkraft

Sonnenkraft GK5-HP Bedienungsanleitung

REC

REC TwinPeak 2S Mono 72 Series Bedienungsanleitung

Sunforce

Sunforce 50039 Bedienungsanleitung

Flexsolar

Flexsolar C100 Leitfaden

Süd Solar

Süd Solar 03005 Bedienungsanleitung

Kodak

Kodak SP21 Bedienungsanleitung

Carmanah

Carmanah Go Power! Solar Flex GP-FLEX-30 Bedienungsanleitung