ViewSonic GS815 Bedienungsanleitung

User Guide

Guide de l’utilisateur

Guía del usuario

Guia do usuário

with Plug & Play

21"(20"ViewableDiagonal)

GS815 Color Monitor

Front cover.fm Page 1 Monday, September 11, 2000 3:51 PM

Contents

ViewSonic GS815 i

Getting Started ...............................................................3

Package Contents .................................................................3

Precautions ...........................................................................3

Quick Installation ...................................................................4

Using the Monitor ..........................................................5

Setting the Timing Mode .......................................................5

Adjusting the Screen Image ..................................................6

OnView Main Menu ............................................................7

Other Information ........................................................12

Specifications ......................................................................12

Troubleshooting...................................................................13

Customer Support ...............................................................14

Cleaning the Monitor ...........................................................15

Limited Warranty .................................................................16

Appendix ......................................................................17

Power Cord Safety Guidelines ............................................17

FCC Information ..................................................................18

GS815.book Page i Wednesday, September 13, 2000 2:49 PM

2ViewSonic GS815

Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.

Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft

Corporation in the United States and other countries.

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of

ViewSonic Corporation.

VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC

are trademarks of VESA.

ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency (EPA).

As an ENERGY STAR®partner, ViewSonic Corporation has determined that this product meets the

ENERGY STAR®guidelines for energy efficiency.

Disclaimer: ViewSonic®Corporation shall not be liable for technical or editorial errors or omissions

contained herein; nor for incidental or consequential damages resulting from furnishing this

material, or the performance or use this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to

change product specifications without notice. Information in this document may change without

notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose

without prior written permission from ViewSonic Corporation.

Electronic Warranty Registration

To meet your future needs, and to receive any additional product information as it becomes

available, please register your monitor's warranty on the Internet at:

http://www.viewsonic.com/registration/

For Your Records

Product Name:

Model Number:

Document Number:

Serial Number:

Purchase Date:

ViewSonic GS815

VCDTS21577-2

GS815-2_UG_96

________________

GS815.book Page 2 Wednesday, September 13, 2000 2:49 PM

ViewSonic GS815 3

Getting Started

Congratulations on your purchase of a ViewSonic GS815 color monitor.

Important! Save the original box and all packing material for future shipping needs.

NOTE: This product was designed for operation in the magnetic fields of the

hemisphere where it was purchased. Also, the word “Windows”in this user guide

refers to the following Microsoft®operating systems: Windows®'95, Windows®'98,

Windows®2000®, Windows NT®(4.0).

Package Contents

Your ViewSonic GS815 package includes:

•ViewSonic GS815 monitor

•DB-15 video cable (unattached)

•Power cord

•Setup guide

•ViewSonic Wizard CD-ROM (including User Guide PDF files and INF/ICM

Display Optimization files)

NOTE: The supplied INF file ensures compatibility with Windows operating

systems, and the ICM file (Image Color Matching) ensures accurate on-screen

colors. ViewSonic®recommends that you install both files.

•For CD-ROM: Insert the CD-ROM into your system, wait for it to auto-start,

select “Monitor Drivers,”and follow the on-screen instructions.

•For diskette: Insert the diskette into your system, run install.exe, and follow

the on-screen instructions.

Precautions

•For best viewing conditions sit at least 18"

from the monitor.

•AVOID TOUCHING THE SCREEN WITH

YOUR FINGERS. Oils from the skin are

difficult to remove.

•NEVER REMOVE THE REAR COVER.

The monitor contains high-voltage parts.

You may suffer serious injury if you touch

these parts.

•Avoid exposing the monitor to direct

sunlight or another heat source. The monitor

should be facing away from direct sunlight

to reduce glare.

•Always handle your monitor with care when

moving it.

•Choose a well ventilated area to position

your monitor. Do not place anything on the

monitor that prevents adequate dissipation of

heat.

•Ensure the area around the monitor is clean

and free of moisture.

•Keep the monitor away from magnets,

motors, transformers, speakers, and

televisions.

•Do not place heavy objects on the monitor,

video cable, or power cord.

•If smoke, abnormal noise, or strange odor is

present, immediately switch the monitor off

and call your dealer or ViewSonic. It is

dangerous to continue using the monitor.

GS815.book Page 3 Wednesday, September 13, 2000 2:49 PM

4ViewSonic GS815

Quick Installation

Connect video cable

Make sure both the monitor and

computer are powered OFF.

The monitor can be connected to one or

two computers using either the DB-15

video cable (included) or a BNC video

cable (purchased separately). To toggle

between two computers: connect the

DB-15 video cable to the monitor and

first computer, and then connect the

BNC video cable to the monitor and the

second computer.

Macintosh ® users: Models older than

G3 require a Macintosh adapter. Attach

the adapter to the computer and plug the

video cable into the adapter.

To order a ViewSonic®Macintosh

adapter, send an email to

vsparts@viewsonic.com or contact

ViewSonic. See Customer Support in

this user guide.

Connect power cord

Connect the power cord from a properly

grounded AC outlet to the monitor.

Power-ON monitor and computer

Power-ON the monitor, then power-ON

the computer. This sequence (monitor

before computer) is very important.

NOTE: At this point Windows®98

users may receive a message asking

them to install the ViewSonic GS815’s

INF file.

Install Display Optimization files

1) Insert the ViewSonic wizard CD-ROM

into your computer's CD-ROM drive.

NOTE: If your computer does not have a

CD-ROM drive, see the Customer Support

section of this user guide.

(2) Wait for the CD-ROM to auto-start.

NOTE: if the CD-ROM does not auto-start:

double-click on the CD-ROM icon in the

Windows Explorer, then double-click on

Install.exe.

(3) Follow the on-screen instructions.

Windows users: Set the Timing Mode

(resolution and refresh rate)

Example: 800 X 600 @ 75Hz.

For instructions on changing the resolution

and refresh rate, see the user guide from your

computer's graphics card.

nstallation is complete!

Enjoy your new ViewSonic GS815

Monitor!

To be best prepared for any future customer

service needs:

•Write the serial number (see back of the

monitor) in “For Your Records”on

page 2.

•Register the warranty of your monitor

on the Internet at:

www.viewsonic.com/registration/

Computer Power Cord

Monitor Power

Cord

Port for

DB-15 video

cable

Ports for

optional

BNC video

cable

GS815.book Page 4 Wednesday, September 13, 2000 2:49 PM

ViewSonic GS815 5

Using the Monitor

Setting the Timing Mode

Setting the timing mode is important for maximizing the quality of the screen

image and minimizing eye strain. The timing mode consists of the resolution

(example 1280 x 1024) and refresh rate (or vertical frequency--example

75 Hz). After setting the timing mode, use the OnView®controls to adjust the

screen image.

The recommended timing modes for this monitor are:

VESA 1280 x 1024 @ 85Hz and VESA 1600 x 1200 @ 85 Hz.

To set the Timing Mode:

1. Set the resolution: Right-click on the Windows®desktop > Properties >

Settings >Desktop Area > set the resolution.

2. Set the refresh rate: See your graphic card's user guide for instructions.

NOTE: To minimize the adjustments required for an optimal screen image,

select a timing mode from the Preset Timing Modes table below.

WARNING: Do NOT set the graphics card in your computer to exceed the

maximum refresh rate for each resolution (see below). Doing so may result in

permanent damage to your monitor.

(NI = Non Interlaced)

Preset Timing Modes

VGA 640 x 400 @ 70Hz

VESA 800 x 600 @ 85Hz

VESA 1024 x 768 @ 75, 85Hz

VESA 1280 x 1024 @ 75Hz

VESA 1280 x 1024 @ 85Hz

VESA 1600 x 1200 @ 75Hz

VESA 1600 x 1200 @ 85Hz

VESA 1792 x1344 @ 75Hz

VESA 1920 x 1440 @ 75Hz

Macintosh 832 x 624 @ 75Hz

Macintosh 1152 870 @ 75Hz

Maximum Refresh Rates

1920 x 1440 NI @ 80Hz

1800 x 1440 NI @ 80Hz

1600 x 1200 NI @ 95Hz

1280 x 1024 NI @ 110Hz

1152 x 870 NI @ 128Hz

1152 x 864 NI @ 129Hz

1024 x 768 NI @ 144Hz

800 600 NI @ 180Hz

640 x 480 NI @ 180Hz

GS815.book Page 5 Wednesday, September 13, 2000 2:49 PM

6ViewSonic GS815

Adjusting the Screen Image

To adjust the screen image, follow the instructions in steps 1 through 5 below.

You will use the buttons of the Front Control Panel to adjust the OnView®

controls, which are explained in “Main Menu Controls”on page 8.

* The monitor automatically degausses each time you turn it on, removing the buildup of magnetic

fields that can affect color purity and convergence. To prevent possible damage, if you turn the

monitor off, then immediately on again, wait 20 minutes before doing this again. Do not turn the

monitor on and off repeatedly. To manually degauss the monitor, see the instructions on page 11.

Front Control Panel

(see instructions below)

Main Menu

with OnView Controls

Displays the

Main Menu Power

On/Off

Power Light

Green = On

Orange = Power Saving Mode

Exits the control screen or

menu; saves all

adjustments

Scroll up and down the

Main Menu; adjust the

value of the selected

control

Displays the control

screen for the selected

control

GS815.book Page 6 Wednesday, September 13, 2000 2:49 PM

ViewSonic GS815 7

Do the following to adjust the screen image:

1To display the Main Menu, press button [1].

2To display a control you want to adjust, press ▲or ▼to scroll up or down the

Main Menu.

3To display the control screen for the selected control, press button [2].

4To adjust the selected control, press the up ▲or down ▼buttons.

5To save the adjustments and exit the menu, press button [1].

OnView Main Menu

The three menus shown below are parts 1, 2, and 3 of the Main Menu.

NOTE: Some controls on the Main Menu are listed in pairs, such as Contrast/

Brightness. To toggle between pairs like these after displaying a control screen

(Step 3 above), press button [2].

Shortcut: Before displaying the Main Menu, press button [2] to display the

Contrast/Brightness control screen.

GS815.book Page 7 Wednesday, September 13, 2000 2:49 PM

8ViewSonic GS815

Main Menu Controls

The menu items shown below can be adjusted by using the up ▲ and down ▼

buttons.

CONTRAST Adjusts the difference between the image

background (black level) and the foreground (white level).

BRIGHTNESS adjusts background black level of screen

image.

HORIZONTAL POSITION moves screen image left or

right.

HORIZONTAL SIZE adjusts width of screen image.

VERTICAL POSITION moves screen image up or down.

VERTICAL SIZE adjusts height of screen image.

PINCUSHION curves the vertical sides for the screen

image.

PIN BALANCE curves the vertical edges of the screen to

the left or right.

TRAPEZOID slants the vertical edges of the screen

image.

PA R A L L E L makes the vertical edges of the screen image

parallel.

ZOOM expands and contracts the entire screen image.

TILT rotates the entire screen image.

VIEWMETER ®displays information regarding the

current input signal coming from the graphics card of the

computer.

GS815.book Page 8 Wednesday, September 13, 2000 2:49 PM

ViewSonic GS815 9

Main Menu Controls

The menu items shown below can be adjusted by using the up ▲ and down ▼

buttons.

H. CONVERGENCE (Horizontal Convergence) adjusts

vertical color alignment. Use this control when red or blue

borders are present around the vertical segments of black

letters on a white background.

V. CONVERGENCE (Vertical Convergence) adjusts

horizontal color alignment. Use this control when red or

blue borders are present around the horizontal segments of

black letters on a white background.

V. LINEARITY- CEN (Vertical Linearity Center) adjusts

the vertical distortion at the center of the screen image.

Note: V. Linearity is an advanced control to used for setup

and calibration only.

V. LINEARITY- SYM (Vertical Linearity Symmetry)

minimizes the distortion (squeezing or stretching) of

geometric shapes between the top and bottom of the screen

image).

Note: V. Linearity is an advanced control to used for setup

and calibration only.

HOOKING - TOP adjusts the top corners of the screen

image.

HOOKING - BOTTOM adjusts the bottom corners of the

screen image.

GS815.book Page 9 Wednesday, September 13, 2000 2:49 PM

Andere Handbücher für GS815

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ViewSonic Monitor Handbücher

ViewSonic

ViewSonic VX2033wm Bedienungsanleitung

ViewSonic

ViewSonic VS19315 Bedienungsanleitung

ViewSonic

ViewSonic CDE4803-H Bedienungsanleitung

ViewSonic

ViewSonic TD2740 Bedienungsanleitung

ViewSonic

ViewSonic N4200W - NextVision - 42" LCD Flat Panel... Bedienungsanleitung

ViewSonic

ViewSonic VG2757V-2K Bedienungsanleitung

ViewSonic

ViewSonic CD3225 Bedienungsanleitung

ViewSonic

ViewSonic VG2228wm Bedienungsanleitung

ViewSonic

ViewSonic VA2219-sh Bedienungsanleitung

ViewSonic

ViewSonic VX2250WB Bedienungsanleitung

ViewSonic

ViewSonic VA703M - 17" LCD Monitor Bedienungsanleitung

ViewSonic

ViewSonic VX2768-2KPC-mhd Bedienungsanleitung

ViewSonic

ViewSonic LCD DISPLAY VS13390 Bedienungsanleitung

ViewSonic

ViewSonic Q71 - Optiquest - 17" CRT Display Bedienungsanleitung

ViewSonic

ViewSonic VCDTS21468-1 Bedienungsanleitung

ViewSonic

ViewSonic VA912B - 19" LCD Monitor Bedienungsanleitung

ViewSonic

ViewSonic VS11668 Bedienungsanleitung

ViewSonic

ViewSonic VS11248 Bedienungsanleitung

ViewSonic

ViewSonic VX2776-2K-PRO Bedienungsanleitung

ViewSonic

ViewSonic VS19112 Bedienungsanleitung

ViewSonic

ViewSonic VA2703 Bedienungsanleitung

ViewSonic

ViewSonic VS13510 Bedienungsanleitung

ViewSonic

ViewSonic VS12400 Bedienungsanleitung

ViewSonic

ViewSonic VE510s Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung