ViewSonic PJ400-2 Bedienungsanleitung
PJ400
LCD Projector
ViewSonic®
Model No. : VS10459
- User Guide
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Руководство пользователя
- 使用手冊
- 使用手冊
iViewSonic PJ400
Compliance Information
For U.S.A.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) The device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
To assure continued FCC compliance, the user must use grounded power supply cord and the cables
which are included with the equipment or specified. Also, any unauthorized changes or modifications
not expressly approved by the party responsible for compliance could void the user’s authority to
operate this device.
For Canada
• This Class B digital apparatus complies with Canadian ICES-003.
• Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
For European Countries
CE Conformity
The device complies with the requirements of the EEC directive 89/336/EEC as
amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic
compaty”, and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.”
User Information for all Countries
Notice: Use the cables which are included with the unit or specified.
iiViewSonic PJ400
Important Safety Instructions
1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in this
guide for further instructions.
7. Do not block any ventilation openings. Install the equipment in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices
(including amplifiers) that produce heat.
9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade and the third prong are provided for your
safety. If the plug does not fit into your outlet, consult an electrician for replacement of the
outlet.
10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the
point where if emerges from the equipment. Be sure that the power outlet is located near the
equipment so that it is easily accessible.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the equipment. When a cart is used, use caution when
moving the cart/equipment combination to avoid injury from tipping over.
13.
Unplug this equipment when it will be unused for long periods of time.
14. Refer all servicing to qualified service personnel. Service is required when the unit has been
damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled
onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not
operate normally or has been dropped.
iiiViewSonic PJ400
Copyright Information
Copyright © ViewSonic® Corporation, 2006. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft
Corporation in the United States and other countries.
ViewSonic, the three birds’ logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC
are trademarks of VESA.
PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation.
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from furnishing this material,
or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose
without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic®
Wizard CD-ROM also provides an opportunity for you to print the registration form, which you may
mail or fax to ViewSonic.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
PJ400
ViewSonic LCD Projector
VS10459
PJ400-2_UG_ENG Rev. 1A 02-22-06
The lamp in this product contains mercury.
Please dispose of in accordance with local, state or federal laws.
Projector
PJ400
User's Manual – Operating Guide
Thank you for purchasing this projector.
WARNING ►Before using, read the "User's Manual - Safety Guide" and
these manuals to ensure correct usage through understanding. After reading,
store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
CAUTION This symbol indicates information that, if ignored, could result
possibly in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
NOTE • The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transmission or use of this document or contents is not permitted without
express written authority.
Trademark acknowledgment
• VGA and XGA are registered trademarks of the International Business Machines
Corporation.
• Apple and Mac are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• Internet Explorer is a trademark of Microsoft Corporation.
All other trademarks are the property of their respective owners.
1ViewSonic PJ400
About this manual . . . . . . . . . . 1
Contents . . . . . . . . . . . . . . . . . 2
Projector features . . . . . . . . . . 3
About contents of package . . 3
Part names . . . . . . . . . . . . . . . 4
Projector . . . . . . . . . . . . . . . . . . . . . 4
Controls . . . . . . . . . . . . . . . . . . . . . . 5
Remote control . . . . . . . . . . . . . . . . 5
Preparations . . . . . . . . . . . . . . 6
Fastening the lens cover . . . . . . . . . 6
Putting batteries . . . . . . . . . . . . . . . 7
Using the remote control . . . . . . . . . 8
About the filter cover for bottom-up use
. . . 9
Setting up . . . . . . . . . . . . . . . 10
Arrangement . . . . . . . . . . . . . . . . . .11
Adjusting the projector's elevator
. . . 12
Connecting your devices . . . . . . . . 13
Connecting power supply . . . . . . . 15
Power on/off . . . . . . . . . . . . . 16
Turning on the power . . . . . . . . . . . 16
Turning off the power . . . . . . . . . . . 17
Operating . . . . . . . . . . . . . . . 18
Adjusting the volume . . . . . . . . . . . 18
Temporarily muting the sound . . . . 18
Selecting an input signal . . . . . . . . 18
Searching an input signal . . . . . . . 19
Selecting an aspect ratio . . . . . . . . 19
Adjusting the zoom (magnifying pow-
er) . . . . . . . . . . . . . . . . . . . . . . . . . 19
Adjusting the focus . . . . . . . . . . . . 19
Using the automatic adjustment fea-
ture . . . . . . . . . . . . . . . . . . . . . . . . 20
Adjusting the position . . . . . . . . . . 20
Correcting the keystone distortions
. . . 20
Using the partial magnify feature
. . . 21
Freezing the screen . . . . . . . . . . . . 21
Temporarily blanking the screen
. . . 21
Multifunctional settings . . . . 22
Using the menu function . . . . . . . . 22
Contents
Contents
EASY MENU . . . . . . . . . . . . . . . . . 25
Aspect, Zoom, Keystone, Mode,
Bright, Contrast, Color, Tint,
Sharpness, Whisper, Mirror, Reset,
Filter time, Language,
Go to advanced menu
PICTURE menu . . . . . . . . . . . . . . . 27
Bright, Contrast, Gamma, Color temp,
Color, Tint, Sharpness, Progressive,
My memory
IMAGE menu . . . . . . . . . . . . . . . . . 30
Aspect, Over scan, V. position,
H. position, H. phase, H. size,
Auto adjust execute
INPUT menu . . . . . . . . . . . . . . . . . 32
Color space, Video format, Frame lock,
Information
SETUP menu . . . . . . . . . . . . . . . . . 34
Zoom, Keystone, Whisper, Mirror, Vol-
ume
SCREEN menu . . . . . . . . . . . . . . . 35
Language, Menu position, OSD bright,
Blank, Start up, MyScreen,
MyScreen lock, Message
OPTION menu . . . . . . . . . . . . . . . . 38
Auto search, Auto off, Lamp time,
Filter time, Service
Maintenance . . . . . . . . . . . . . 41
Lamp . . . . . . . . . . . . . . . . . . . . . . . 41
Air filter . . . . . . . . . . . . . . . . . . . . . 43
Other care . . . . . . . . . . . . . . . . . . . 45
Troubleshooting . . . . . . . . . . 46
Related messages . . . . . . . . . . . . . 46
Regarding the indicator lamps . . . . 48
Phenomena that may easily be mis-
taken for machine defects . . . . . . . 50
Warranty and after-service
. . . 52
Specifications . . . . . . . . . . . . 52
Customer Service . . . . . . . . . 54
Warranty . . . . . . . . . . . . . . . . 55
2ViewSonic PJ400
Projector features / About contents of package
Projector features
This projector is used to project various computer signals as well as NTSC / PAL
/ SECAM video signals onto a screen. It requires just a little space for installation
and gets a large image from short distance.
High Brightness
Newly developed 165W UHB (Ultra High Brightness) lamp gives you a higher
brightness image on a screen. The image can be still kept as bright and clean
enough for use in bright rooms.
Low Noise
WHISPER mode is equipped for reducing acoustic noise to realize quieter
operation. It is perfect for use in low luminance rooms where low noise is more
important than brightness.
Compact Body
Even with its many features, this projector is extremely compact and slim,
which gives you more flexibility and usability to use it where you want.
About contents of package
Please see the "Contents of package" of the "User's Manual - Quick Guide". Your
projector should come with the items shown there. Contact immediately your deal-
er if anything is missing.
NOTE • Keep the original packing materials for future reshipment. For
moving the projector, be sure to use the original packing material. Use special
caution for the lens part.
Contents of package
(1) Projector with Lens cover
(2) Strap (for Lens cover)
(3) Filter cover (for bottom-up use)
(4) Remote control
(5) Two AA batteries (for Remote control)
(6) Power cord
(7) RGB cable
(8) User’s manual CD-ROM wizard
(9) Quick Start Guide
(1) (2)
(3) (4) (5)
(6) (7) (8)
VIDEO RGBSEARCH
STANDBY/ON
FREEZE
OFF
ON
MAGNIFY
ASPECT AUTO BLANK
HOME
PAGE UP
PAGE DOWN
END MUTE
VOLUME
KEYSTONE
POSITION
ESC
ENTER
MENU
RESET
3ViewSonic PJ400
Part names
Lens
Lens cover
Filter cover
(Air filter and intake vent
are inside.)
Elevator button
Elevator foot
Remote sensor
Focus ring
Vent
AC inlet
Power switch
Elevator button
S-VIDEO port
VIDEO port
CONTROL port
Part names
Projector
Lamp cover
(Lamp unit is inside.)
Elevator foot
Bottom side
Speaker
Front-Right side
Rear-Left side
Control buttons
Ports
(See below.)
Vent
Ports
AUDIO port
Restart switch
RGB port
Kensington lock slot
NOTE (*) About Restart switch: This projector is controlled by an internal
microprocessor. Under certain exceptional circumstances, the projector may not
operate correctly and the microprocessor will need to be reset. In such a case,
please push the Restart switch by using a cocktail stick or similar, and before
turning on again, make the projector cool down at least 10 minutes without
operating. Only push the Restart switch in these exceptional instances.
S-VIDEO VIDEO AUDIO
RGB
CONTROL
K
4ViewSonic PJ400
Part names
LAMP indicator
TEMP indicator
POWER indicator
INPUT button
Cursor buttons
▲,▼,◄,►
STANDBY/ON button
Controls
Remote control
SEARCH button
RGB button
VIDEO button
ASPECT button
MAGNIFY
ON button
OFF button
FREEZE button
POSITION button
ESC button
STANDBY/ON button
AUTO button
BLANK button
VOLUME button
MUTE button
KEYSTONE button
Zoom
+ button
- button
MENU button
Menu cursor buttons
▲,▼,◄,►
ENTER button
RESET button
VIDEO RGBSEARCH
FREEZE
OFF
ON
MAGNIFY
ASPECT AUTO BLANK
MUTE
VOLUME
KEYSTONE
POSITION
ESC
ENTER
MENU
RESET
ZOOM
+
-
STANDBY/ON
INPUT
MENU
LAMP
TEMP
POWER
5ViewSonic PJ400
Preparations
Fastening the lens cover
WARNING ►Do not fasten the lens cover during use or immediately after
use. Handling while the projector is in a high temperature could cause a burn
and/or malfunction to the projector. Before operating, make sure that the power
switch is off, that the power cord is not plugged in, and that the projector is cool
adequately.
To avoid losing, please fasten the lens cover to the projector using the strap.
1. Slowly turn over the projector, so that the bottom is facing up.
2. Fix the strap to the strap ring of projector.
3. Fix the strap to the strap ring of lens cover.
4. Attach the lens cover to the lens of projector, and slowly turn over the projec-
tor, so that the top is facing up.
Preparations
Strap ring
Projector (Bottom side)
Strap
Strap ring
Strap
Strap ring
(1)
Lens cover
Strap
Strap ring
Strap
Strap ring
Strap ring
(2)
(1) (2)
6ViewSonic PJ400
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere ViewSonic Projektor Handbücher
ViewSonic
ViewSonic PJ359 Schulungshandbuch
ViewSonic
ViewSonic CINE1000 - DLP Home Theater Projector Bedienungsanleitung
ViewSonic
ViewSonic VS11481 Bedienungsanleitung
ViewSonic
ViewSonic PJ458D - XGA DLP Projector Bedienungsanleitung
ViewSonic
ViewSonic PJ359w - WXGA LCD Projector Handbuch
ViewSonic
ViewSonic LS900WU Bedienungsanleitung
ViewSonic
ViewSonic TS513C Bedienungsanleitung
ViewSonic
ViewSonic X11-4K Bedienungsanleitung
ViewSonic
ViewSonic PJD6543w Bedienungsanleitung
ViewSonic
ViewSonic LS700-4KP Bedienungsanleitung
ViewSonic
ViewSonic X10-4K Bedienungsanleitung
ViewSonic
ViewSonic PJ562 - XGA LCD Projector Bedienungsanleitung
ViewSonic
ViewSonic PJ350 Bedienungsanleitung
ViewSonic
ViewSonic PX704HD Bedienungsanleitung
ViewSonic
ViewSonic PJD6210-WH Bedienungsanleitung
ViewSonic
ViewSonic PJ506ED Bedienungsanleitung
ViewSonic
ViewSonic PJD5122 Bedienungsanleitung
ViewSonic
ViewSonic PJ658 - XGA LCD Projector Bedienungsanleitung
ViewSonic
ViewSonic PJ755D Bedienungsanleitung
ViewSonic
ViewSonic CINE5000 - 1000 Lumens Widescreen DLP Home Theater... Bedienungsanleitung
Beliebte Projektor Handbücher anderer Marken
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung
NEC
NEC NP600S EDU Bedienungsanleitung
BenQ
BenQ SH753P Bedienungsanleitung
Eiki
Eiki EK-623U series Bedienungsanleitung
Epson
Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung
Epson
Epson PowerLite Home Cinema 705HD Bedienungsanleitung
