ViewSonic PJD8353S Bedienungsanleitung

PJD8653ws/PJD8353s

DLP Projector

User Guide

IMPORTANT: Please read this User Guide to obtain important information on installing

and using your product in a safe manner, as well as registering your product for future

service. Warranty information contained in this User Guide will describe your limited

coverage from ViewSonic Corporation, which is also found on our web site at http://www.

viewsonic.com in English, or in specic languages using the Regional selection box in the

upper right corner of our website. “Antes de operar su equipo lea cu idadosamente las

instrucciones en este manual”

Model No. VS14956/VS14991

FCC Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy, and if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

yReorient or relocate the receiving antenna.

yIncrease the separation between the equipment and receiver.

yConnect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

yConsult the dealer or an experienced radio/TV technician for help.

Warning: You are cautioned that changes or modications not expressly approved by the

party responsible for compliance could void your authority to operate the equipment.

For Canada

yThis Class B digital apparatus complies with Canadian ICES-003.

yCet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CE Conformity for European Countries

The device complies with the EMC Directive 2004/108/EC and Low Voltage

Directive 2006/95/EC.

Following information is only for EU-member states:

The mark is in compliance with the Waste Electrical and Electronic Equipment Directive

2002/96/EC (WEEE).

The mark indicates the requirement NOT to dispose the equipment including any spent

or discarded batteries or accumulators as unsorted municipal waste, but use the return

and collection systems available.

If the batteries, accumulators and button cells included with this equipment, display

the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal

content of more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than

0.004% Lead.

Compliance Information

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this unit near water.

6. Clean with a soft, dry cloth.

7. Do not block any ventilation openings. Install the unit in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

devices (including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a

third grounding prong. The wide blade and the third prong are provided for your safety. If

the provided plug does not t into your outlet, consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs. Convenience

receptacles and the point where they exit from the unit. Be sure that the power outlet is

located near the unit so that it is easily accessible.

11. Only use attachments/accessories specied by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specied by the

manufacturer, or sold with the unit. When a cart is used, use caution when moving

the cart/unit combination to avoid injury from tipping over.

13. Unplug this unit when unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when the unit has

been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid

is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the

unit does not operate normally or has been dropped.

iii

Declaration of RoHS2 Compliance

This product has been designed and manufactured in compliance with Directive 2011/65/

EU of the European Parliament and the Council on restriction of the use of certain hazardous

substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply

with the maximum concentration values issued by the European Technical Adaptation Commit-

tee (TAC) as shown below:

Substance Proposed Maximum

Concentration Actual Concentration

Lead (Pb) 0.1% < 0.1%

Mercury (Hg) 0.1% < 0.1%

Cadmium (Cd) 0.01% < 0.01%

Hexavalent Chromium (Cr6+) 0.1% < 0.1%

Polybrominated biphenyls (PBB) 0.1% < 0.1%

Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1%

Certain components of products as stated above are exempted under the Annex of the RoHS2

Directives as noted below:

Examples of exempted components are:

1. Mercury in compact uorescent lamps not exceeding 5 mg per lamp and in other lamps

not specically mentioned in the Annex of RoHS2 Directive

2. Lead in glass of cathode ray tubes, electronic components, uorescent tubes, and elec-

tronic ceramic parts (e.g. piezoelectronic devices)

3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or

more lead)

Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium con-

taining up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight

Macintosh and Power Macintosh are registered trademarks of Apple Inc.

Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft

Corporation in the United States and other countries.

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks

of ViewSonic Corporation.

VESA is a registered trademark of the Video Electronics Standards Association. DPMS and

DDC are trademarks of VESA.

PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation.

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omis-

sions contained herein; nor for incidental or consequential damages resulting from furnishing

this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to

change product specications without notice. Information in this document may change without

notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any

purpose without prior written permission from ViewSonic Corporation.

Product Registration

To fulll possible future product needs, and to receive additional product information as it

becomes available, please visit your region section on ViewSonic’s website to register your

product online.

The ViewSonic CD also provides an opportunity for you to print the product registration form.

Upon completion, please mail or fax to a respective ViewSonic ofce. To nd your registration

form, use the directory “:\CD\Registration”. Registering your product will best prepare you for

future customer service needs.

Please print this user guide and ll the information in the “For Your Records” section. Your LCD

displays serial number is located on the rear side of the display.

For additional information, please see the “Customer Support” section in this guide.

For Your Records

Product Name: PJD8653ws/PJD8353s

ViewSonic DLP Projector

Model Number: VS14956/VS14991

Document Number: PJD8653ws/PJD8353s_UG_ENG Rev. 1A 01-17-13

Serial Number: ___________________________________________

Purchase Date: ___________________________________________

Product disposal at end of product life

The lamp in this product contains mercury which can be dangerous to you and the environment.

Please use care and dispose of in accordance with local, state or federal laws.

ViewSonic respects the environment and is committed to working and living green. Thank you

for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.

USA & Canada: http://www.viewsonic.com/company/green/recycle-program/

Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/

Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx

Notes on the AC Power Cord

AC Power Cord must meet the requirement of countries where you use this projector. Please

conrm your AC plug type with the graphics below and ensure that the proper AC Power Cord

is used. If the supplied AC Power Cord does not match your AC outlet, please contact your

sales dealer. This projector is equipped with a grounding type AC line plug. Please ensure

that your outlet ts the plug. Do not defeat the safety purpose of this grounding type plug. We

highly recommend using a video source device also equipped with a grounding type AC line

plug to prevent signal interference due to voltage uctuations.

Ground Ground

GroundGround

For Australia and Mainland China For the U.S.A and Canada

For Continental Europe For the U.K.

Table of Contents

Introduction 7

Package Overview ................................. 7

Product Overview................................... 8

Main Unit............................................ 8

Control Panel ..................................... 9

Connection Ports ............................. 10

Remote Control.................................11

Installation 12

Connecting to Computer/Notebook...... 12

Connecting to Video Sources............... 13

Powering On/Off the Projector ............. 14

Powering On the Projector............... 14

Powering Off the Projector............... 15

LED Indicator Messages.................. 15

Adjusting the Projected Image ............. 16

Adjusting the Projector’s Height....... 16

Adjusting the Projector’s Focus ....... 17

Adjusting Projection Image Size ...... 17

User Controls 19

Using the Control Panel ....................... 19

Using the Remote Control.................... 20

On-screen Display Menus.................... 22

How to operate ................................ 22

Structure .......................................... 23

Picture.............................................. 25

Screen ............................................. 27

Setting.............................................. 29

Setting | Security.............................. 31

Volume............................................. 33

Options ............................................ 34

Options | Lamp Settings................... 36

3D .................................................... 37

Interactive ........................................ 38

LAN.................................................. 39

Timer................................................ 40

Web Management............................ 41

Appendices 48

Troubleshooting.................................... 48

Image Problems............................... 48

Projector Problems .......................... 51

Remote Control Problems ............... 51

Sound Problems .............................. 51

3D Problems .................................... 51

On Screen Messages ...................... 52

Compatibility Modes............................. 53

Replacing the lamp............................... 57

Replacing and cleaning the optional dust

lter....................................................... 58

Ceiling Mount Installation ..................... 59

Specications ....................................... 60

AC Power Cord

Unpack and inspect the box contents to ensure all parts listed below are in

the box. If something is missing, please contact our customer service.

Documentation:

yUser’s Guide (DVD)

yQuick Start Card

AAA Batteries x 2

(For remote control)

Projector with lens cap Remote Control

Introduction

Package Overview

Due to different applications in each Country, some regions may have different accessories.

VGA Cable

AAA

Product Overview

1. Focus Ring

2. Lens

3. IR Receiver

4. Control Panel

5. Lamp Cover

Main Unit

6. Input / Output Connection Ports

7. Power Socket

8. Elevator Feet

9. Elevator Feet

10. Elevator Feet Spacer

(Front View)

(Rear View)

(Bottom View)

Control Panel

1. Power key / Power LED

2. Four directional select keys / Keystone

3. IR Receiver

4. Menu / Exit

5. Temp (Temperature) LED

6. Lamp LED

7. Enter

8. Source

Andere Handbücher für PJD8353S

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ViewSonic Projektor Handbücher

ViewSonic

ViewSonic PA503 Series Bedienungsanleitung

ViewSonic

ViewSonic VS10897 Bedienungsanleitung

ViewSonic

ViewSonic LX700-4K Bedienungsanleitung

ViewSonic

ViewSonic PJ552 Bedienungsanleitung

ViewSonic

ViewSonic PJL6223 Bedienungsanleitung

ViewSonic

ViewSonic PJD6544w Bedienungsanleitung

ViewSonic

ViewSonic PJ359w - WXGA LCD Projector Bedienungsanleitung

ViewSonic

ViewSonic PJD6252L Bedienungsanleitung

ViewSonic

ViewSonic PJ656 - XGA Projector 6.2 Lbs Bedienungsanleitung

ViewSonic

ViewSonic ViewDock PJ258D Bedienungsanleitung

ViewSonic

ViewSonic PJD6211P Bedienungsanleitung

ViewSonic

ViewSonic PJD6552LWS Bedienungsanleitung

ViewSonic

ViewSonic PJD6253 Bedienungsanleitung

ViewSonic

ViewSonic PJD5232L-D Bedienungsanleitung

ViewSonic

ViewSonic PJ556D Bedienungsanleitung

ViewSonic

ViewSonic PJ750 Bedienungsanleitung

ViewSonic

ViewSonic PJD5223 Bedienungsanleitung

ViewSonic

ViewSonic PG800X Bedienungsanleitung

ViewSonic

ViewSonic PLED-W200 Bedienungsanleitung

ViewSonic

ViewSonic PJD5112 - s SVGA DLP Projector Bedienungsanleitung

ViewSonic

ViewSonic Pro8300 Bedienungsanleitung

ViewSonic

ViewSonic PJ759 - 63 Tft LCD Projector Bedienungsanleitung

ViewSonic

ViewSonic PRO9500 Bedienungsanleitung

ViewSonic

ViewSonic PRO8450W VS13646 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung