ViewSonic Pro10 Series Bedienungsanleitung

Pro10 Series

Professional DLP®Projector

User Guide

IMPORTANT: Please read this User Guide to obtain important information on installing

and using your product in a safe manner, as well as registering your product for

future service. Warranty information contained in this User Guide will describe your

limited coverage from ViewSonic Corporation, which is also found on our web site at

http://www.viewsonic.com in English, or in specific languages using the Regional

selection box in the upper right corner of our website. “Antes de operar su equipo lea cu

idadosamente las instrucciones en este manual”

Model No. VS15149/VS15541

FCC Statement

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own expense.

Warning: You are cautioned that changes or modications not expressly approved by the

party responsible for compliance could void your authority to operate the equipment.

For Canada

CAN ICES-3(A)/NMB-3(A)

CE Conformity for European Countries

The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive

2014/35/EU.

Warning -

- This product must not be used in residential areas.

- This product may cause interference if used in residential areas.

Such use must be avoided unless the user takes special measures to reduce

electromagnetic emissions to prevent interference to the reception of radio and

television broadcasts.

Following information is only for EU-member states:

The mark is in compliance with the Waste Electrical and Electronic Equipment Directive

2012/19/EU (WEEE).

The mark indicates the requirement NOT to dispose the equipment including any spent

or discarded batteries or accumulators as unsorted municipal waste, but use the return

and collection systems available.

If the batteries, accumulators and button cells included with this equipment, display

the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal

content of more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than

0.004% Lead.

Compliance Information

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this unit near water.

6. Clean with a soft, dry cloth.

7. Do not block any ventilation openings. Install the unit in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

devices (including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a

third grounding prong. The wide blade and the third prong are provided for your safety. If

the provided plug does not t into your outlet, consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs. Convenience

receptacles and the point where they exit from the unit. Be sure that the power outlet is

located near the unit so that it is easily accessible.

11. Only use attachments/accessories specied by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specied by the

manufacturer, or sold with the unit. When a cart is used, use caution when

moving the cart/unit combination to avoid injury from tipping over.

13. Unplug this unit when unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when the unit has

been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid

is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the

unit does not operate normally or has been dropped.

iii

Declaration of RoHS2 Compliance

This product has been designed and manufactured in compliance with Directive 2011/65/

EU of the European Parliament and the Council on restriction of the use of certain hazard-

ous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to

comply with the maximum concentration values issued by the European Technical Adapta-

tion Committee (TAC) as shown below:

Substance Proposed Maximum

Concentration Actual Concentration

Lead (Pb) 0.1% < 0.1%

Mercury (Hg) 0.1% < 0.1%

Cadmium (Cd) 0.01% < 0.01%

Hexavalent Chromium (Cr6+) 0.1% < 0.1%

Polybrominated biphenyls (PBB) 0.1% < 0.1%

Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1%

Certain components of products as stated above are exempted under the Annex III of the

RoHS2 Directives as noted below:

Examples of exempted components are:

1. Mercury in cold cathode uorescent lamps and external electrode uorescent lamps

(CCFL and EEFL) for special purposes not exceeding (per lamp):

(1) Short length (≦500 mm): maximum 3.5 mg per lamp.

(2) Medium length (＞500 mm and ≦1,500 mm): maximum 5 mg per lamp.

(3) Long length (＞1,500 mm): maximum 13 mg per lamp.

2. Lead in glass of cathode ray tubes.

3. Lead in glass of uorescent tubes not exceeding 0.2% by weight.

4. Lead as an alloying element in aluminium containing up to 0.4% lead by weight.

5. Copper alloy containing up to 4% lead by weight.

6. Lead in high melting temperature type solders (i.e. lead-based alloys containing 85%

by weight or more lead).

7. Electrical and electronic components containing lead in a glass or ceramic other than

dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic

matrix compound.

Macintosh and Power Macintosh are registered trademarks of Apple Inc.

Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft

Corporation in the United States and other countries.

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks

of ViewSonic Corporation.

VESA is a registered trademark of the Video Electronics Standards Association. DPMS and

DDC are trademarks of VESA.

PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation.

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omis-

sions contained herein; nor for incidental or consequential damages resulting from furnishing

this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to

change product specications without notice. Information in this document may change without

notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any

purpose without prior written permission from ViewSonic Corporation.

Product Registration

To fulll possible future product needs, and to receive additional product information as it

becomes available, please visit your region section on ViewSonic’s website to register your

product online.

The ViewSonic CD also provides an opportunity for you to print the product registration form.

Upon completion, please mail or fax to a respective ViewSonic ofce. To nd your registration

form, use the directory “:\CD\Registration”. Registering your product will best prepare you for

future customer service needs.

Please print this user guide and ll the information in the “For Your Records” section.

For additional information, please see the “Customer Support” section in this guide.

For Your Records

Product Name: Pro10 Series

ViewSonic Professional DLP®Projector

Model Number: VS15149/VS15541

Document Number: Pro10 Series_UG_ENG Rev. 1B 12-05-17

Serial Number: ___________________________________________

Purchase Date: ___________________________________________

Product disposal at end of product life

The lamp in this product contains mercury which can be dangerous to you and the environment.

Please use care and dispose of in accordance with local, state or federal laws.

ViewSonic respects the environment and is committed to working and living green. Thank you

for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.

USA & Canada: http://www.viewsonic.com/company/green/recycle-program/

Europe: http://www.viewsoniceurope.com/eu/support/call-desk/

Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx

Notes on the AC Power Cord

AC Power Cord must meet the requirement of countries where you use this projector. Please

conrm your AC plug type with the graphics below and ensure that the proper AC Power Cord

is used. If the supplied AC Power Cord does not match your AC outlet, please contact your

sales dealer. This projector is equipped with a grounding type AC line plug. Please ensure

that your outlet ts the plug. Do not defeat the safety purpose of this grounding type plug. We

highly recommend using a video source device also equipped with a grounding type AC line

plug to prevent signal interference due to voltage uctuations.

Ground Ground

GroundGround

For Australia and Mainland China For the U.S.A and Canada

For Continental Europe For the U.K.

Please follow all warnings, precautions and maintenance as

recommended in this user’s guide.

▀■Warning- Do not look into the projector’s lens when the lamp is on. The

bright light may hurt your eyes.

▀■Warning- To reduce the risk of re or electric shock, do not expose this

projector to rain or moisture.

▀■Warning- Please do not open or disassemble the projector as this may

cause electric shock.

▀■Warning- When replacing the lamp, please allow the unit to cool down.

Follow instructions as described on pages 65-66.

▀■Warning- This projector will detect the life of the lamp itself. Please be

sure to change the lamp when it shows warning messages.

▀■Warning- Reset the “Lamp Reset” function from the on-screen display

“OPTIONS | Lamp Settings” menu after replacing the lamp

module (refer to page 56).

▀■Warning- When switching the projector off, please ensure the cooling

cycle has been completed before disconnecting power. Allow

60 seconds for the projector to cool down.

▀■Warning- Do not use lens cap when projector is in operation.

▀■Warning- When the lamp is approaching the end of its lifetime, the

message “Lamp Warning: Lamp life exceeded.” will show

on the screen. Please contact your local reseller or service

center to change the lamp as soon as possible.

▀■Warning- Do not look into or point the laser pointer on your remote

control into your or someone’s eyes. Laser pointer can cause

permanent damage to eyesight.

▀■Warning- Do not transport the projector with any lens installed.

Precautions

vii

Do:

yTurn off and unplug the power plug from the AC outlet before cleaning the

product.

yUse a soft dry cloth with mild detergent to clean the display housing.

yDisconnect the power plug from AC outlet if the product is not being used for a

long period of time.

Do not:

yBlock the slots and openings on the unit provided for ventilation.

yUse abrasive cleaners, waxes or solvents to clean the unit.

yUse under the following conditions:

- In extremely hot, cold or humid environments.

`Ensure that the ambient room temperature is within 5°C ~ 40°C

`Relative humidity is 10% ~ 85%

- In areas susceptible to excessive dust and dirt.

- Near any appliance generating a strong magnetic eld.

- In direct sunlight.

Table of Contents

SCREEN | PIP / POP....................... 40

SETTING ......................................... 41

SETTING | Lens Function................ 42

SETTING | Security ......................... 43

SETTING | Signal (RGB) ................. 44

SETTING | Signal (Video)................ 45

SETTING | Audio Settings ............... 46

SETTING | Advanced....................... 47

SETTING | Network ......................... 48

SETTING | Image Blending ............. 52

OPTIONS......................................... 53

OPTIONS | Lamp Settings............... 55

OPTIONS | Remote Settings ........... 56

OPTIONS | Advanced ...................... 57

Appendices 58

Troubleshooting.................................... 58

Image Problems............................... 58

Projector Problems .......................... 61

On Screen Messages ...................... 64

Replacing the Lamp ............................. 65

Replacing the Filter .............................. 67

Compatibility Modes............................. 68

Remote Key Code................................ 70

RS232 Pin Assignments....................... 71

RS232 Protocol Function List............... 72

Ceiling Mount Installation ..................... 79

Specications ....................................... 80

Customer Support ................................ 82

Limited Warranty .................................. 83

Mexico Limited Warranty...................... 85

Precautions ............................................vi

Introduction 9

Product Features.................................... 9

Package Overview ............................... 10

Product Overview..................................11

Main Unit...........................................11

Control Panel ................................... 12

Connection Ports ............................. 13

Remote Control................................ 14

Installation 16

Installing the Projector Lens................. 16

Connecting to Computer/Notebook...... 17

Connecting to Video Sources............... 18

Powering On/Off the Projector ............. 19

Powering On the Projector............... 19

Powering Off the Projector............... 20

Warning Indicator............................. 21

LED Lighting Message..................... 21

Adjusting the Projected Image ............. 22

Adjusting the Projector’s Height....... 22

Adjusting the Projecting Image’s

Position ............................................ 23

User Controls 26

Using the Control Panel ....................... 26

On-screen Display Menus.................... 27

How to operate ................................ 27

Structure .......................................... 28

PICTURE ......................................... 32

PICTURE | Advanced ...................... 34

SCREEN.......................................... 36

SCREEN | Geometry ....................... 37

`XGA (1024x768) / WXGA(1280x800), support resolution: Up to WUXGA

@60Hz (Reduced Blanking) and UXGA @60Hz

`Single lamp system

`Power Zoom/Focus

`Power lens shift

`Dynamic Aperture

`10W x 1 speaker

`Filter module

`Support PIP/POP function

`Support network management for remote control and monitoring

Introduction

Product Features

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ViewSonic Projektor Handbücher

ViewSonic

ViewSonic PJ250 - XGA DLP Projector Bedienungsanleitung

ViewSonic

ViewSonic LS832WU Bedienungsanleitung

ViewSonic

ViewSonic PJ750 Bedienungsanleitung

ViewSonic

ViewSonic PJD5126 Bedienungsanleitung

ViewSonic

ViewSonic PLED-W500 Bedienungsanleitung

ViewSonic

ViewSonic PJD6210 Bedienungsanleitung

ViewSonic

ViewSonic PJD7383 Bedienungsanleitung

ViewSonic

ViewSonic PA700WC Bedienungsanleitung

ViewSonic

ViewSonic V52HD Bedienungsanleitung

ViewSonic

ViewSonic DLP PROJECTOR PJD7400W Bedienungsanleitung

ViewSonic

ViewSonic PRO8500 Bedienungsanleitung

ViewSonic

ViewSonic PX701-4K Bedienungsanleitung

ViewSonic

ViewSonic VS12680 Bedienungsanleitung

ViewSonic

ViewSonic VS11973 Bedienungsanleitung

ViewSonic

ViewSonic VBC100 Bedienungsanleitung

ViewSonic

ViewSonic PFJ62 Bedienungsanleitung

ViewSonic

ViewSonic PLED-W600 Bedienungsanleitung

ViewSonic

ViewSonic PJL6223 Bedienungsanleitung

ViewSonic

ViewSonic PJD2121 - SVGA DLP Projector Bedienungsanleitung

ViewSonic

ViewSonic PJ503D - DLP Projector Bedienungsanleitung

ViewSonic

ViewSonic PJ759 - 63 Tft LCD Projector Bedienungsanleitung

ViewSonic

ViewSonic PJD7333 Bedienungsanleitung

ViewSonic

ViewSonic PJD6353 Bedienungsanleitung

ViewSonic

ViewSonic PG603W Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung