ViewSonic VBC100 Bedienungsanleitung

VBC100

myViewBoard Sens

User Guide

Thank you for choosing ViewSonic®

As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding

the world’s expectations for technological evolution, innovation, and simplicity.

At ViewSonic®, we believe that our products have the potential to make a positive

impact in the world, and we are confident that the ViewSonic® product you have

chosen will serve you well.

Once again, thank you for choosing ViewSonic®!

Compliance Informaon

FCC Statement

This device complies with part 15 of FCC Rules. Operaon is subject to the following

two condions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may

cause undesired operaon.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protecon against harmful interference in a residenal

installaon. This equipment generates, uses, and can radiate radio frequency energy,

and if not installed and used in accordance with the instrucons, may cause

harmful interference to radio communicaons. However, there is no guarantee that

interference will not occur in a parcular installaon. If this equipment does cause

harmful interference to radio or television recepon, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separaon between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

You are cauoned that changes or modicaons not expressly approved by

the party responsible for compliance could void your authority to operate the

equipment.

Warning: Use only power supplies listed in the user instrucons.

AVERTISSEMENT: Ulisez uniquement les sources d'alimentaon menonnées dans

les instrucons d'ulisaon.

For Canada

• This Class B digital apparatus complies with Canadian ICES-3(B)/ NMB-3(B).

• Cet appareil numérique de la classe B est conforme à la norme ICES-3(B)/ NMB-

3(B) Canada.

CE Conformity for European Countries

The device complies with the EMC Direcve 2014/30/EU and General

Product Safety Direcve 2001/95/EC.

Following informaon is only for EU-member states:

The mark is in compliance with the Waste Electrical and Electronic

Equipment Direcve 2012/19/EU (WEEE).

The mark indicates the requirement NOT to dispose the equipment

including any spent or discarded baeries or accumulators as unsorted municipal

waste, but use the return and collecon systems available.

If the baeries, accumulators and buon cells included with this equipment, display

the chemical symbol Hg, Cd, or Pb, then it means that the baery has a heavy metal

content of more than 0.0005% Mercury or more than, 0.002% Cadmium, or more

than 0.004% Lead.

Declaraon of RoHS2 Compliance

This product has been designed and manufactured in compliance with Direcve

2011/65/EU of the European Parliament and the Council on restricon of the use of

certain hazardous substances in electrical and electronic equipment (RoHS2

Direcve), and is deemed to comply with the maximum concentraon values issued

by the European Technical Adaptaon Commiee (TAC) as shown below:

Substance Proposed Maximum

Concentraon

Actual

Concentraon

Lead (Pb) 0.1% < 0.1%

Mercury (Hg) 0.1% < 0.1%

Cadmium (Cd) 0.01% < 0.01%

Hexavalent Chromium (Cr6+) 0.1% < 0.1%

Polybrominated biphenyls (PBB) 0.1% < 0.1%

Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1%

Bis (2-ethylhexyl) phthalate (DEHP) 0.1% < 0.1%

Butyl benzyl phthalate (BBP) 0.1% < 0.1%

Dibutyl phthalate (DBP) 0.1% < 0.1%

Diisobutyl phthalate (DIBP) 0.1% < 0.1%

Certain components of products as stated above are exempted under the Annex III

of the RoHS2 Direcves as noted below:

Examples of exempted components are:

1. Mercury in cold cathode uorescent lamps and external electrode uorescent

lamps (CCFL and EEFL) for special purposes not exceeding (per lamp):

(1) Short length (≦500 mm): maximum 3.5 mg per lamp.

(2) Medium length (＞500 mm and ≦1,500 mm): maximum 5 mg per lamp.

(3) Long length (＞1,500 mm): maximum 13 mg per lamp.

2. Lead in glass of cathode ray tubes.

3. Lead in glass of uorescent tubes not exceeding 0.2% by weight.

4. Lead as an alloying element in aluminum containing up to 0.4% lead by weight.

5. Copper alloy containing up to 4% lead by weight.

6. Lead in high melng temperature type solders (i.e. lead-based alloys containing

85% by weight or more lead).

7. Electrical and electronic components containing lead in a glass or ceramic other

than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or

ceramic matrix compound.

Contents

Compliance Information.............................................. 3

FCC Statement........................................................................................................3

CE Conformity for European Countries ..................................................................4

Declaration of RoHS2 Compliance..........................................................................5

Product Overview........................................................ 8

Package contents....................................................................................................8

Front View ..............................................................................................................9

Rear View..............................................................................................................10

Getting Started.......................................................... 11

Connecting to Power ............................................................................................12

Connecting to a Display Device ............................................................................13

Connecting to an Audio Device ............................................................................13

Connecting to an IFP (OPS Built-in PC) Device......................................................14

Performing Connections ............................................ 15

Installing the Hardware ........................................................................................15

Normal Type.......................................................................................................... 15

ViewBoard Type .................................................................................................... 16

WPD/CDE Type...................................................................................................... 17

Making Connections.............................................................................................18

USB-C Connection ................................................................................................. 18

HDMI Connection.................................................................................................. 18

DC In...................................................................................................................... 18

Audio In ................................................................................................................. 18

Stitching Calibration .............................................................................................19

Method 1............................................................................................................... 19

Method 2 .............................................................................................................. 19

Method 3 .............................................................................................................. 19

Stitching Calibration Limitations...........................................................................20

OSD UI Description ...............................................................................................21

Image..................................................................................................................... 21

White Balance ....................................................................................................... 21

HDMI Output......................................................................................................... 22

HDMI Output > Resolution settings ...................................................................... 22

Audio ..................................................................................................................... 22

PIR Detector .......................................................................................................... 22

Time Option........................................................................................................... 23

Language ............................................................................................................... 23

AI setting ............................................................................................................... 23

Stitching Calibration .............................................................................................. 24

Save or Exit............................................................................................................ 24

Operating myViewBoard Sens ................................... 25

Installing the myViewBoard Sens App..................................................................25

myViewBoard Sens Startup Screen Description ...................................................26

Troubleshooting ........................................................ 29

Specifications ............................................................ 30

Other Information ..................................................... 32

Customer Service..................................................................................................32

Limited Warranty..................................................................................................33

Product Overview

Package contents

Please take a moment to check if all the necessary items are included in the

package. If anything is missing or damaged, please contact your dealer immediately.

VBC100

myViewBoard Sens

Quick Start Guide

Contents

 

2 3

VBC100

myViewBoard Sens

Quick Start Guide

Contents

 

2 3

Power adapter x 1

AC plug type *4 (US/AU/EU/UK)

VBC100

myViewBoard Sens

Quick Start Guide

Contents

 

2 3

USB 3.1 Type C Male to

Type C Male 1.8M cable x 1

VBC100

myViewBoard Sens

Quick Start Guide

Contents

 

2 3

Quick start guide (QSG)

VBC100

myViewBoard Sens

Quick Start Guide

Contents

 

2 3

USB 2.0 Type C Male to

USB-A Male 1.8M cable x 1

A. Ethylene Vinyl Acetate (EVA 65*18mm)

Apply to WPD/CDE/ViewBoard models.

B. Ethylene Vinyl Acetate (EVA 65*9.5mm)

Apply to WPD/CDE models.

Note:

WPD/CDE = ViewSonic CDE8620, CDE7520,

CDE5520, CDE8620

ViewBoard = IFP8670, IFP6550-3, IFP5550-2

Front View

1 9

4 5 7 8

No. Components Description

1Internal Microphone Built-in audio input

2 Internal Microphone Built-in audio input

3 Power LED

Indicator LED

LED Behavior LED Status

Wide lens video Red light Remain on

Tele lens video Green light Remain on

Stitching video Red + Green light Remain on

Slide door is closed No light Off

4 PIR Sensor

Passive infrared sensor is an electronic sensor that measures infrared

(IR) light radiating from objects in its field of view and is used in

PIR-based motion detectors.

5Light Level Sensor Measures internal or external light levels.

6 Humidity/Temperature Sensor Measures relative humidity and temperature.

7Wide Camera Lens FOV-D = 146.6° ± 5° camera lens

8Tele Camera Lens FOV-D = 58.4° ± 5°camera lens

9 Slider Door Power on/off switch

10 Clip VBC100 fixed bracket clip

Rear View

2 3 4

No. Components Description

1Audio In

External audio source input.

Note: Attaching an external audio source disables the built-in microphone.

2 DC In DC jack 5V, system power input connector.

3 HDMI OUT V1.4B (Type A) port. Connect to devices with HDMI input function.

4USB-C

USB 2.0 for data transmission, network signal output,

and an extension for audio and video.

Note: For privacy concerns, no video output is produced.

5Camera key:

Cursor Up / Down / Left / Right / Enter

Andere Handbücher für VBC100

Inhaltsverzeichnis

Andere ViewSonic Projektor Handbücher

ViewSonic

ViewSonic PJD6235 Bedienungsanleitung

ViewSonic

ViewSonic PJD6220-3D - 720p DLP Home Theater Projector Bedienungsanleitung

ViewSonic

ViewSonic PJD5353 Bedienungsanleitung

ViewSonic

ViewSonic PX703HD Bedienungsanleitung

ViewSonic

ViewSonic PJ750-2 Bedienungsanleitung

ViewSonic

ViewSonic VS18864 Bedienungsanleitung

ViewSonic

ViewSonic PJD5126 Bedienungsanleitung

ViewSonic

ViewSonic PLED-W200 Bedienungsanleitung

ViewSonic

ViewSonic PJD7325 Bedienungsanleitung

ViewSonic

ViewSonic PJD7333 Bedienungsanleitung

ViewSonic

ViewSonic PJ550 - LCD Projector XGA Bedienungsanleitung

ViewSonic

ViewSonic PJD5112 - s SVGA DLP Projector Bedienungsanleitung

ViewSonic

ViewSonic PJ551D - XGA DLP Projector Bedienungsanleitung

ViewSonic

ViewSonic ViewDock PJ258D Bedienungsanleitung

ViewSonic

ViewSonic VS17612 Bedienungsanleitung

ViewSonic

ViewSonic PJD5126 Bedienungsanleitung

ViewSonic

ViewSonic PJ558D Bedienungsanleitung

ViewSonic

ViewSonic CINE5000 - 1000 Lumens Widescreen DLP Home Theater... Bedienungsanleitung

ViewSonic

ViewSonic PJ258D - XGA DLP Projector Bedienungsanleitung

ViewSonic

ViewSonic M1 mini Bedienungsanleitung

ViewSonic

ViewSonic PJD7383 Bedienungsanleitung

ViewSonic

ViewSonic LS610HDH Series Bedienungsanleitung

ViewSonic

ViewSonic PJ556D Bedienungsanleitung

ViewSonic

ViewSonic PJD5126 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung