Viglen Vig860S Bedienungsanleitung

XMA Limited, 7 Handley Page Way, Old Parkbury Lane, Colney Street, St. Albans, Hertfordshire AL2 2DQ

Tel: 01727 201 850 | Fax: 01727 201858 | Email: [email protected]| Web: www.viglen.co.uk

Windows® 7 Installation and PCIE RAID Setup Guide

Operating System(s) Support:

The Vig860S motherboard is officially approved for Windows 10 for 6th and 7th gen Processors.

Windows 7 is supported for 6th gen process only.

Please note, there is no support of windows 7 operating system for 7th Gen Intel(R) Core(TM)

processor family (Codename Kaby Lake).

7th Gen Intel(R) Core(TM) processor family (Codename Kaby Lake)

Microsoft Windows* 10-64

6th Gen Intel(R) Core(TM) processor family (codename Skylake)

Microsoft Windows* 7-64

Microsoft Windows* 8.1-64

Microsoft Windows* 10-64

Microsoft support policies with updated Windows 7 & 8.1 guidelines.

Supported Windows Versions

Kaby Lake (Intel 7th Generation Core processors)

Windows 10 ONLY

Skylake (Intel 6th Generation Core processors)

Windows 7, 8.1,10

XMA Limited, 7 Handley Page Way, Old Parkbury Lane, Colney Street, St. Albans, Hertfordshire AL2 2DQ

Tel: 01727 201 850 | Fax: 01727 201858 | Email: [email protected]| Web: www.viglen.co.uk

Windows® 7 and USB driver installation

Based on the chipset specification, the Vig860S motherboard requires USB 3.0 drivers to be preloaded

in order to use USB keyboard/mouse during Windows® 7 installation. This section is a guide on

preloading USB 3.0 drivers and installing Windows® 7.

Method 1: Using SATA ODD & USB devices

Load the USB driver using the ASUS support DVD and install Windows® 7 using a USB device.

Requirement:

•1 x EZ_Installer_Windows 7_V1.03.10

•1 x Windows® 7 installation DVD

•1 x Working system (PC)

•1 x SATA ODD

•1 x USB storage device (8 GB or more)

The USB storage device requires 8 GB or more capacity. It is recommended to format the

Storage device before use.

If you want to install Windows® 7 64-bit UEFI mode, use both a USB ODD and a SATA

ODD.

1. Insert the Windows® 7 installation DVD into a USB ODD, or copy all files on the Windows® 7

installation DVD to a USB storage device on a working system.

2. Connect the USB ODD or USB storage device to your system.

3. Insert the ASUS support DVD into a SATA ODD on your system.

4. Power on your system and press F8 during POST (Power-On Self-Test) to enter the boot

screen.

5. Select the USB ODD or USB storage device as the boot device.

XMA Limited, 7 Handley Page Way, Old Parkbury Lane, Colney Street, St. Albans, Hertfordshire AL2 2DQ

Tel: 01727 201 850 | Fax: 01727 201858 | Email: [email protected]| Web: www.viglen.co.uk

Figure 1 –Boot Device Menu

6. The USB driver will be loaded automatically during installation start-up.

Figure 2 –Windows start-up screen

The “Setup is starting...” screen will show up if the USB driver is loaded correctly.

7. Follow the onscreen instructions to complete the Windows® 7 installation.

XMA Limited, 7 Handley Page Way, Old Parkbury Lane, Colney Street, St. Albans, Hertfordshire AL2 2DQ

Tel: 01727 201 850 | Fax: 01727 201858 | Email: [email protected]| Web: www.viglen.co.uk

Method 2: Using a modified Windows® 7 ISO

Load the USB driver and install Windows® 7 using a modified Windows® 7 installation DVD.

Requirement:

• 1 x EZ_Installer_Windows 7_V1.03.10

• 1 x Windows® 7 installation source

• 1 x Working system (PC)

• 1 x SATA ODD

1. On your working system, create an ISO image file of the Windows® 7 installation source using a

third-party ISO software.

2. Copy both “Auto_Unattend.xml” and “Auto_Unattend” folder from the root directory of the Driver

DVD to your system.

3. Edit the ISO file and add both “Auto_Unattend.xml” and “Auto_Unattend” folder into the ISO file.

4. Burn this ISO file onto an empty DVD to create a modified Windows® 7 installation DVD.

5. Insert the modified Windows® 7 installation DVD into an ODD on your system.

6. Power on your system and press F8 during POST (Power-On Self-Test) to enter the boot screen.

7. Select the ODD as the boot device.

8. The USB driver will be loaded automatically during installation start-up.

The “Setup is starting...” screen will show up if the USB driver is loaded correctly

XMA Limited, 7 Handley Page Way, Old Parkbury Lane, Colney Street, St. Albans, Hertfordshire AL2 2DQ

Tel: 01727 201 850 | Fax: 01727 201858 | Email: [email protected]| Web: www.viglen.co.uk

Method 3: Using ASUS EZ Installer

Use the ASUS EZ Installer Utility to create a modified Windows® 7 installation source.

Requirement:

•1 x EZ_Installer_Windows 7_V1.03.10

•1 x Windows® 7 installation DVD

•1 x Working system (PC)

•1 x SATA ODD

•1 x USB storage device (8 GB or more)

1. Insert the Windows® 7 installation DVD.

2. Launch the ASUS EZ Installer located under Drivers\Windows 7 Installation Guide folder on Driver DVD and

FTP link for the drivers.

3. Select a method of creating a modified Windows® 7 installation file:

Windows® 7 OS disk to USB storage device

a) Select Windows 7 OS disk to USB storage device then click Next.

Figure 3

b) Check I agree and then click Next

Figure 4

XMA Limited, 7 Handley Page Way, Old Parkbury Lane, Colney Street, St. Albans, Hertfordshire AL2 2DQ

Tel: 01727 201 850 | Fax: 01727 201858 | Email: [email protected]| Web: www.viglen.co.uk

c) Select the source of the Windows® 7 installation disk then click Next.

Figure 5

d) Select the USB storage device and click next. Next.

Figure 6

e) Click the refresh icon if the USB storage device is not displayed.

f) Tick Install NVMe hotfix if needed.

g) Click Yes to clear the contents on the USB storage device and create a bootable USB device.

Make sure to backup contents on the USB storage device, as it will be formatted.

h) Once completed, click OK to finish.

i) Burn this ISO file onto an empty DVD to create a modified Windows® 7 installation DVD.

XMA Limited, 7 Handley Page Way, Old Parkbury Lane, Colney Street, St. Albans, Hertfordshire AL2 2DQ

Tel: 01727 201 850 | Fax: 01727 201858 | Email: [email protected]| Web: www.viglen.co.uk

Information:

Before using this method to install Windows® 7:

• If you are using only one SATA HDD, ensure that your SATA HDD has more than twice the storage

space (ISO file size +500MB).

• If you are using two or more SATA HDDs, ensure that at least two of your SATA HDDs have more

than the storage space (ISO file size +500MB).

j) Select Windows 7 OS disk to ISO file then click Next.

Figure 7

k) Check I agree and then click Next.

Figure 8

i) Select the source of the Windows® 7 installation disk then click Next.

XMA Limited, 7 Handley Page Way, Old Parkbury Lane, Colney Street, St. Albans, Hertfordshire AL2 2DQ

Tel: 01727 201 850 | Fax: 01727 201858 | Email: [email protected]| Web: www.viglen.co.uk

Figure 9

l) Select the folder to save the modified Windows® 7 installation ISO file and click Next.

Tick Install NVMe hotfix if needed.

m) Once completed, click OK to finish.

n) Burn this ISO file onto an empty DVD to create a modified Windows® 7 installation DVD.

4. Insert the modified Windows® 7 installation DVD into an ODD or connect the USB storage

device with modified Windows® 7 installation files onto your system.

5. Power on your system and press F8 during POST (Power-On Self-Test) to enter the boot

screen.

6. Select the ODD or USB storage device as the boot device.

7. The USB driver and NVMe driver will be loaded automatically during installation start-up.

The “Setup is starting...” screen will show up if the USB driver and NVMe driver are loaded

correctly.

8. Follow the onscreen instructions to complete the Windows® 7 installation.

XMA Limited, 7 Handley Page Way, Old Parkbury Lane, Colney Street, St. Albans, Hertfordshire AL2 2DQ

Tel: 01727 201 850 | Fax: 01727 201858 | Email: [email protected]| Web: www.viglen.co.uk

Windows® 7 PCIE RAID Setup

Based on the chipset specification, your system requires USB and RAID drivers to be preloaded in

order to use PCIE RAID during Windows® 7 64-bit UEFI installation. This section is a guide on

preloading USB and RAID drivers and installing Windows® 7.

Ensure that your motherboard supports PCIE RAID setup before doing so.

Requirements:

• 1 x Bootable USB storage device created in the above section Using ASUS EZ Installer

• 1 x Modified Windows® 7 installation DVD created in the above section Using ASUS EZ Installer

• 1 x SATA ODD

• 2 x PCIE SSD

1. Insert the modified Windows® 7 installation DVD into an ODD or connect the USB storage device with

modified Windows® 7 installation files onto your Vig750S/Vig760S/Vig830S series platform.

2. Power on your system and press F2 during POST (Power-On Self Test) to enter the boot screen.

3. Go to Advanced > PCH Storage Configuration > SATA Mode Selection and select RAID.

Figure 10

XMA Limited, 7 Handley Page Way, Old Parkbury Lane, Colney Street, St. Albans, Hertfordshire AL2 2DQ

Tel: 01727 201 850 | Fax: 01727 201858 | Email: [email protected]| Web: www.viglen.co.uk

Figure 11

4. Two new PCIE RAID options appear. Select RST Controlled in both options.

Figure 12

Andere Viglen Hauptplatine Handbücher

Viglen

Viglen VIG590M Bedienungsanleitung

Viglen

Viglen VIG555M Bedienungsanleitung

Viglen

Viglen Vig396M Bedienungsanleitung

Viglen

Viglen Vig395p Bedienungsanleitung

Viglen

Viglen Vig660W Bedienungsanleitung

Viglen

Viglen Vig645M Bedienungsanleitung

Viglen

Viglen VIG820S Bedienungsanleitung

Viglen

Viglen Vig870G Bedienungsanleitung

Viglen

Viglen Intel D925XECV2 Bedienungsanleitung

Viglen

Viglen D965GF Bedienungsanleitung

Viglen

Viglen Vig711W Bedienungsanleitung

Viglen

Viglen Vig770S Bedienungsanleitung

Viglen

Viglen VIG556M Bedienungsanleitung

Viglen

Viglen Vig535b Bedienungsanleitung

Viglen

Viglen vig830s Bedienungsanleitung

Viglen

Viglen Vig565s Bedienungsanleitung

Viglen

Viglen VIG615M Bedienungsanleitung

Viglen

Viglen Vig627M Bedienungsanleitung

Viglen

Viglen D945GTP Bedienungsanleitung

Viglen

Viglen D915GHA Bedienungsanleitung

Viglen

Viglen SX220 Bedienungsanleitung

Viglen

Viglen Vig644M Bedienungsanleitung

Viglen

Viglen Vig566s Bedienungsanleitung

Viglen

Viglen VIG520S Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung