Villa ProCtrl iTop Twist Bedienungsanleitung
-13
Villa Dutch Design
Sluiskade 134
9581 JR Musselkanaal
Netherlands
T +31(0)20.716. 36. 55
www.secure-ipad-stand.com
info@villa-proctrl.com
by ProCtrl
1
iTop Twist Aluminum iPad Wall Mount User Manual
DESCRIPTION
User Manual
Date
09-10-2012
PROJECT
iTop Twist Wall Mount
PROJECT NO.
09051201
DRAWN BY
T.Koops
by ProCtrl
Villa Dutch Design
by ProCtrl
Villa Dutch Design
by ProCtrl
-13
Villa Dutch Design
Sluiskade 134
9581 JR Musselkanaal
Netherlands
T +31(0)20.716. 36. 55
www.secure-ipad-stand.com
info@villa-proctrl.com
by ProCtrl
Introduction
2
Thank you for purchasing this iTop Twist Wall Mount for the iPad2 and new iPad by Villa ProCtrl.
High design, functionality and quality were top of mind when developing this product, as we did not make any concessions in its
construction and our choice of materials.
This iPad Wall Mount is made out of high grade Aluminum and DuPont Corian, the solid non-porous material approved for use in
specialized environments (including laboratories and hospitals) and high-traffic places. Most importantly, Corian is easy to clean and
small surface damage can be sanded out. The frame and support structure is made out of Alumimum, adding to the overall look, while
increasing its weight for increased stability.
Reducing the environmental impact has also been a key factor in the development and production of this product. All of the materials
used can be recycled, including all paper and the carton, that comply with the international FSC standards.
We are confident that you will enjoy this product and will appreciate our attention to detail.
Thank you for taking the time to read this manual. We recommend that you keep it for future reference.
The Villa ProCtrl team
Important Safety Instructions:
For your own safety, please read the following important instructions carefully in their entirety, before assembling the Wall Mount -
1. Read and follow these instructions fully.
2. Keep these instructions.
3. Heed all warnings.
4. Clean only as instructed in this manual.
5. Protect the USB cord from being walked on or pinched or from getting stuck into the stand.
6 Use this Wall Mount only with the Apple iPad version 2 or new iPad
7. While we take great care to remove all of the sharp edges from the Aluminum components, please be careful when handling.
8. The Wall Mount is for indoor use only
-13
Villa Dutch Design
Sluiskade 134
9581 JR Musselkanaal
Netherlands
T +31(0)20.716. 36. 55
www.secure-ipad-stand.com
info@villa-proctrl.com
by ProCtrl
CLIENT
Client Name
PROJECT
Project Name
PROJECT NO.
245.170
DRAWN BY
NH, MB
ISSUE
08.08.08
DESCRIPTION
Sheet Description
Rotation assembly
iPad top shell
Column
3
(9 x) M5 x .8 - 16 button head cap screw 18-8SS
(5 x) M5 x square nut
1
1
1
Parts are optional and are only included depending on on choosen model.
(4 x) M6 x 16 Countersunk bolt
Wall plate
iPad top shell(no home)
iPad holder bottom
Anchor disk
(4 x) M5 x .8 - 16 button head cap screw 18-8SS
Allen Keys
3 mm for M5
4 mm for M6
5 mm for M6
-13
Villa Dutch Design
Sluiskade 134
9581 JR Musselkanaal
Netherlands
T +31(0)20.716. 36. 55
www.secure-ipad-stand.com
info@villa-proctrl.com
by ProCtrl
4 x M6 x 16 Countersunk bolts
Wall plate
Frame assembly
- Align parts as shown and tighten M6 x countersunk 16 bolts.
4
Column
-13
Villa Dutch Design
Sluiskade 134
9581 JR Musselkanaal
Netherlands
T +31(0)20.716. 36. 55
www.secure-ipad-stand.com
info@villa-proctrl.com
by ProCtrl
Over the wall Connection
Through wall connection
Tip:
Mount the sub assembly to the wall
before moving to the next step
Make sure lead the cable 255 mm
outside the tube
Cable Option
At this point mount the sub assembly to the wall and make one of the following
choices
5
-13
Villa Dutch Design
Sluiskade 134
9581 JR Musselkanaal
Netherlands
T +31(0)20.716. 36. 55
www.secure-ipad-stand.com
info@villa-proctrl.com
by ProCtrl
6
iPad bottom shell (Corian)
(4 x) M5 Square nut
(5 x) M5 x 16 socket button screws
Rotation top
Assembled part
iTop Rotor plate assembly
- Align parts as shown and tigthen (4 x) M5 x 16 socket button screws
-13
Villa Dutch Design
Sluiskade 134
9581 JR Musselkanaal
Netherlands
T +31(0)20.716. 36. 55
www.secure-ipad-stand.com
info@villa-proctrl.com
by ProCtrl
7
Rotor top sub assembly
Frame assembly
iTop Assembly
- Align parts as shown and tighten (4 x) M6 x 30 Socket head capscrew with Allen key (included)
(4 x) M6 x 30 Socket head capscrew
Column Clamp
When attaching the Corian head of the iPad Stand to the angled top of the support
pole, do not tighten any of the 4 bolts completely, before commencing with the 3
other bolts.
Instead, you must run all 4 bolts down to within one turn of full tightness and then
complete the process by tightening each bolt the final turn.
Check all 4 bolts to confirm that they are in tightly.
1
-13
Villa Dutch Design
Sluiskade 134
9581 JR Musselkanaal
Netherlands
T +31(0)20.716. 36. 55
www.secure-ipad-stand.com
info@villa-proctrl.com
by ProCtrl
8
Original Apple iPad docking cable
Docking connector
Cable Assembly
- dry fit cable and connector as shown before installing the iPad.
- If needed lead the headphone jack through the hole in the back of the unit and connect as shown.
Headphone acces
-13
Villa Dutch Design
Sluiskade 134
9581 JR Musselkanaal
Netherlands
T +31(0)20.716. 36. 55
www.secure-ipad-stand.com
info@villa-proctrl.com
by ProCtrl
9
1
1
Make sure cable is led through the special canal before securing the M5 x 16 screws
Final Assembly
- Connect Apple iPad docking cable and optionally, the headphone jack.
- Connect Apple iPad docking cable.
- Position Apple iPad as shown and place top cover over it.
- Place(4 x) M5 x 16 button head cap screws as shown and tighten Allen key (included)
Apple iPad
iPad Top Shell
(4 x) M5 x .8 - 16 button head cap screw 18-8SS
Attach docking connector
Headphone jack
-13
Villa Dutch Design
Sluiskade 134
9581 JR Musselkanaal
Netherlands
T +31(0)20.716. 36. 55
www.secure-ipad-stand.com
info@villa-proctrl.com
by ProCtrl
10
Take out or insert M5 x 16 bolt
to either allow or deny rotatation
Rotation
- Top can be rotated as shown in pictures below.
- To lock unit into portrait or landscape mode insert (1x) M5 x 16 button head cap screw as shown
(in portrait or landscape mode)
Andere Handbücher für iTop Twist
1
Inhaltsverzeichnis
Andere Villa ProCtrl Rack & Stand Handbücher
Beliebte Rack & Stand Handbücher anderer Marken
Salamander
Salamander Acadia AC/W/L400/WH Bedienungsanleitung
Fohhn
Fohhn VAT-09 Benutzerhandbuch
ricoo
ricoo FS0522 Bedienungsanleitung
AMSOIL
AMSOIL BMK-22 Kurzanleitung
Kargo Master
Kargo Master 48220 Bedienungsanleitung
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung
