Vingtor Stentofon SDS-1 Bedienungsanleitung
Technical Manual 1490000010
Quick Installation & Configuration Guide
SDS-1
SIP Desk Station with Display & Dual LAN
2
The SDS-1 is a product developed for Zenitel Norway AS and
is primarily used as part of a Zenitel Norway AS IP Intercom
solution. The SDS-1 is not pre-congured to support or carry
emergency calls to any type of hospital, law enforcement agency,
medical care unit (“Emergency Service(s)”) or any other kind of
Emergency Service. You must make additional arrangements to
access Emergency Services. It is your responsibility to purchase
SIP-compliant Internet telephone service, properly congure the
SDS-1 to use that service, and periodically test your conguration
to conrm that it works as you expect. If you do not do so, it is
your responsibility to purchase traditional wireless or landline
telephone services to access Emergency Services.
ZENITEL NORWAY DOES NOT PROVIDE CONNECTIONS TO
EMERGENCY SERVICES VIA THE SDS-1. NEITHER ZENITEL
NORWAY NOR ITS OFFICERS, EMPLOYEES OR AFFILIATES
MAY BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR
LOSS. YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS
OR CAUSES OF ACTION ARISING FROM OR RELATING
TO YOUR INABILITY TO USE THE SDS-1 TO CONTACT
EMERGENCY SERVICES, AND YOUR FAILURE TO MAKE
ADDITIONAL ARRANGEMENTS TO ACCESS EMERGENCY
SERVICES IN ACCORDANCE WITH THE IMMEDIATELY
PRECEDING PARAGRAPH.
3
Package Contents
Precautions
WARNING: Please DO NOT power cycle the SDS-1 during system boot-up
or rmware upgrade. You may corrupt rmware images and cause the unit to
malfunction.
Overview
• SDS-1 SIP Desk Station with Display and Dual LAN (Item Number: 1490000010)
SDS-1 is a Small Business HD IP phone that features 2 lines with 2 SIP accounts,
132x48 backlit graphical LCD, 3 XML programmable context-sensitive softkeys,
dual network ports with PoE and 3-way conference. The SDS-1 delivers HD
wideband audio, superb full-duplex hands-free speakerphone with advanced
acoustic echo cancellation, advanced security protection for privacy, leading edge
SIP intercom features and integration with the Pulse and AlphaCom IP Intercom
platforms developed by Zenitel Norway AS.
1 x Phone Main
Case
1 x Handset
1 x Phone Cord
1 x Ethernet
Cable
1 x Phone Stand
1 x Quick Installation Guide
1 x GPL License
4
Phone Installation
Installing the Phone with Phone Stand
1. Insert the hooks on top of the stand into the slots on the back of the phone
• You can either use the upper OR lower slots
2. Firmly slide the stand upward to lock it in place
Installing the Phone with Wall Mount
1. Insert all 4 hooks located at the front of the wallmount into the slots on the back
of the phone.
2. Firmly slide the wall mount upward to lock it in place.
3. Attach the phone to the wall via the wall mount holes.
To setup the GXP1620/1625, follow the steps below:
1. Connect the handset and main phone case with the
phone cord.
2. Connect the LAN port of the phone to the RJ-45 socket
of a hub/switch or a router (LAN side of the router) using the
Ethernet cable.
3. Connect the 5V DC output plug to the power jack on the
phone; plug the power adapter into an electrical outlet.
4. The LCD will display provisioning or rmware upgrade in-
formation. Before continuing, please wait for the date/time
display to show up.
5. Using the phone embedded web server or keypad con-
guration menu, you can further congure the phone using
either a static IP or DHCP.
4
CONNECTING THE PHONE:
Tips For Using the Keypad:
Line Key
Message Waiting
Indicator
Message
Standard Keypad
Phonebook
Page/Intercom
Home Button
Hold
Softkey
Menu/OK key
Navigation keys
Record
Headset
Speaker
Volume
Send
Transfer
Mute
Conference
1. To access the MENU, press the round MENU button.
2. Navigate the menu by using the UP/DOWN and LEFT/
RIGHT buttons.
3. Press the round MENU button to conrm a menu selec-
tion.
4. The phone automatically exits MENU mode when there
is an incoming call, the phone goes off-hook, or when the
MENU mode is left idle for 60 seconds.
3
Installing the Phone (Phone Stand):
1. Insert the hooks on top of the stand into a slots, you have options
to use either upper OR lower slots.
2. Firmly slide the stand upward to lock it in place.
Installing the Phone (Wall Mount):
UPPER
LOWER
OR
1. Insert all 4 hooks located in the front of wall mount into the slots.
2. Firmly slide the wall mount upward to lock it in place.
3. Pull out and rotate the tab from handset rest to hold the handset
while the phone is mounted on the wall.
LAN Port Power Handset Port
PC Port Headset Port
5
Tab with extension up
Handset Rest
Tab with extension down
Connecting the Phone
1. Connect the handset and main phone case with the phone cord.
2. Connect the LAN port of the phone to the RJ-45 socket of a PoE switch using
the Ethernet cable.
• The LCD will display provisioning or rmware upgrading information.
Before continuing, please wait for the date/time display to appear.
3. Using the web conguration interface or the keypad conguration menu, you
can further congure the phone using either a static IP or DHCP.
To setup the GXP1620/1625, follow the steps below:
1. Connect the handset and main phone case with the
phone cord.
2. Connect the LAN port of the phone to the RJ-45 socket
of a hub/switch or a router (LAN side of the router) using the
Ethernet cable.
3. Connect the 5V DC output plug to the power jack on the
phone; plug the power adapter into an electrical outlet.
4. The LCD will display provisioning or rmware upgrade in-
formation. Before continuing, please wait for the date/time
display to show up.
5. Using the phone embedded web server or keypad con-
guration menu, you can further congure the phone using
either a static IP or DHCP.
4
CONNECTING THE PHONE:
Tips For Using the Keypad:
Line Key
Message Waiting
Indicator
Message
Standard Keypad
Phonebook
Page/Intercom
Home Button
Hold
Softkey
Menu/OK key
Navigation keys
Record
Headset
Speaker
Volume
Send
Transfer
Mute
Conference
1. To access the MENU, press the round MENU button.
2. Navigate the menu by using the UP/DOWN and LEFT/
RIGHT buttons.
3. Press the round MENU button to conrm a menu selec-
tion.
4. The phone automatically exits MENU mode when there
is an incoming call, the phone goes off-hook, or when the
MENU mode is left idle for 60 seconds.
3
Installing the Phone (Phone Stand):
1. Insert the hooks on top of the stand into a slots, you have options
to use either upper OR lower slots.
2. Firmly slide the stand upward to lock it in place.
Installing the Phone (Wall Mount):
UPPER
LOWER
OR
1. Insert all 4 hooks located in the front of wall mount into the slots.
2. Firmly slide the wall mount upward to lock it in place.
3. Pull out and rotate the tab from handset rest to hold the handset
while the phone is mounted on the wall.
LAN Port Power Handset Port
PC Port Headset Port
4. Pull out the tab from the handset cradle (see gure below).
5. Rotate the tab and plug it back into the slot with the extension up to hold the
handset while the phone is mounted on the wall.
6
Tips for Using the Keypad
Phone Conguration
For further information on the configuration of AlphaCom, SIP, and Pulse, please go
to wiki.zenitel.com.
Conguring the SDS-1 Using the Keypad
1. Make sure the phone is idle.
2. Press the Menu key to access the keypad menu to congure the phone.
3. Select Phone > SIP > Account to congure settings for SIP Server (AlphaCom
or Pulse), SIP User ID (Extension Number), SIP Auth ID and SIP Password.
4. Follow the menu options to congure the basic features of the phone, e.g. the
IP address if using a static IP.
Line Keys
Status Indicator
Message
Standard Keypad
Phonebook
Page/Intercom
Home
Hold
Softkeys
Menu/OK Key
Navigation Keys
Record
Headset
Speaker
Volume
Send
Transfer
Mute
Conference
1. To access the menu, press the round Menu key.
2. Navigate the menu by using the Up/Down and Left/Right arrow-keys.
3. Press the round Menu key to conrm a menu selection.
4. The phone automatically exits menu mode when there is an incoming call, the
phone goes o-hook, or when menu mode is left idle for 60 seconds.
7
Conguring the SDS-1 Using Web Browser
1. Ensure your phone is properly powered up and connected to the Internet.
2. Press the Menu key to enter the menu of the phone.
3. Navigate to Status > Network Status and press the Menu key to check the IP
address.
4. Enter the phone’s IP address in your PC’s browser.
5. Log in by entering the default Username: admin and Password: alphaadmin
6. Register the account on the SDS-1 by selecting ACCOUNTS > Account 1/2
> General Settings to congure Account Name, SIP Server (AlphaCom or
Pulse), SIP User ID (Extension Number).
8
AlphaCom Conguration
AlphaCom SDS-1 Account Setup
●Select ACCOUNTS >Account 1 >General Settings
● Enter the values shown above for the parameters
Account Active: Check Yes button
SIP Server: IP address of AlphaCom server
SIP User ID: Directory Number of SDS-1 phone
Authenticate ID: Same as SIP User ID
Note: For changes to take eect, it may be necessary to temporarily disable the account.
First check the No button for Account Active, then click Save and Apply. Once this is
done, re-enable the account by checking the Yes button for Account Active followed by
Save and Apply again.
9
AlphaCom SDS-1 Audio Settings
● Check in AlphaPro under Users & Stations the codec that has been
selected for the SIP phone (normally G722)
●Select Account 1 >Audio Settings
●Set all codecs from the Preferred Vocoder list to the one dened in
AlphaPro, i.e. G722.
10
Pulse Conguration
Pulse SDS-1 Account Setup
●Select ACCOUNTS >Account 1 >General Settings
● Enter the values shown above for the parameters
Account Active: Check Yes button
SIP Server: IP address of intercom station set as Pulse Server
SIP User ID: Directory Number of the SDS-1 phone
Authenticate ID: Same as SIP User ID
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Vingtor Stentofon IP-Telefon Handbücher
