Violet Audio ADP61 Bedienungsanleitung

User's Manual V1.3

incorporates software rev.2

ADP61

Violet Audio

Studio AV Preamp Decoder

VOLUME

Violet Audio

Voltage:

Voltage are 230/120V AC,50/60Hz.

CAUTION: To reduce the risk of electric shock, do

not remove cover (or back). No user-serviceable

parts inside. Please refer all such issues to

qualified service personnel.

CAUTION

RISK OF SHOCK

NOTICE! !NOTICE! !

Thank you very much for purchasing our product.

pleasure

for many years to come

enjoy

Also, k

We sincerely hope it will bring you much

In order to optimum performance from this

unit, as well as for matters of personal safety for all

concerned, please read this manual carefully.

eep it in a safe place for future reference.

Explanation of Graphical Symbols

The lightning flash & arrowhead symbol,

within an equilateral triangle, is intended

to alert you to the presence of danger.

The exclamation point within an equilate-

ral triangle is intended to alert you to the

presence of important operating and ser-

vicing instructions.

Important Safety Instructions

1. Please read all instructions. All the safety and

operating instructions should be read carefully before

operating this appliance.

2. Store these safety and operating instructions in a safe

place for future reference.

3. Please heed all warnings. All warnings issued in this

manual exist not only to prevent potential damage to

equipment, but also to ensure your personal safety.

4. Follow all instructions. In order to enjoy optimum

performance, please follow all instructions and procedures.

5. Do not use this apparatus near water.

6. Remove any dust by using dry cloth or brush.

If more thorough cleaning is necessary, use damp cloth

(in this event, please disconnect unit from AC outlet).

7. Do not block ventilation openings. Proper airflow is

essential for optimum operation.

8. Keep unit away from heat sources such as radiators,

stoves, ovens, heating ducts and devices (including

amplifiers) that can potentially produce heat.

9. Do not tamper with the AC (power) lead. If the plug

provided does not fit your power outlet, consult qualified

service personnel or electrician for a suitable solution.

Also, never use a damaged AC lead, for any purpose!

10. Take measures to protect AC power lead from being

walked on, crushed, twisted, cut or pinched. Exposed

core is highly dangerous if plugged into AC outlet.

11. Only use attachments and accessories as specified

by the manufacturer. Never force connectors!

12. Avoid over-stacking equipment. Stacking more than

two units can become unsafe for equipment and operator

alike. Use only with a cart, stand, mounting brackets or

table specified by your supplier, or specifically sold with

the apparatus. Please secure firmly if using a trolley or cart.

WARNING

To reduce the risk of fire or electric shock, do not

expose this unit to rain or moisture.

PLEASE FOLLOW THESE STEPS:

PLEASE REGISTER YOUR PRODUCT ON

www.violetaudio.com

Continues overleaf

Setup and Maintenance of the Receiver

Do not connect to the AC outlet until all other

connections have been completed.

Do not use your receiver immediately after transferring it

from a cold environment to warm. This action may result

in a build up of condensation inside the unit.

Do not expose your receiver to water or excessively high

temperatures.

After having disconnected your receiver, clean the case

with a soft cloth, or with a slightly damp leather chamois.

Never use strong solvents.

Should connectors show build up of contaminants

over a period of time, in order to ensure optimum

performance, clean contacts with appropriate

cleaning agents. Consult your dealer or qualified

service personnel

Protect Your Receiver From Overheating

Do not block ventilation holes

any or cover unit with

materials that impede air flow, such as other equipment,

cartons and fabrics etc

Arrange receiver so that air can circulate freely.the

If stacking is absolutely necessary, please allow for

proper air flow between units.

If mounting on a stand or into a 19” EIU equipment rack,

please provide adequate ventilation and spacing with

adjacent units.

Place high heat emitting devices such as

power-amplifiers and satellite receivers away

from receiver and other sensitive components.

To prevent overheating, please provide

sufficient ventilation.

15. Cleaning - Unplug this unit from the wall outlet before cle-

aning. Do not apply spray, aerosols or liquid cleaners directly

onto chassis. If necessary, use only a slightly damp cloth.

16. External antenna - if used with an external antenna, take

care to locate the antenna away from power lines.

17. Accidental object and liquid entry - Care should be taken

so as to prevent foreign objects or liquids entering the enclosure.

Should this occur, detach power cord immediately and refer

unit to qualified service personnel. Do not attempt to power up

again until approved by said personnel.

18. If you have any doubts as to the safe operation or optimum

performance of this unit, please consult your retailer or

qualified service personnel.

13. Unplug receiver during lightning storms or if unused

for long periods of time.

14. All servicing issues should be referred on to qualified

personnel, especially should the apparatus not operate

in a normal manner. It is also highly recommended should

the unit be exposed to rain or be subjected to liquid spills,

objects falling inside or suffer physical damage to chassis,

power-supply cord or plug.

Important Safety Instructions

Table of Content

Features 4

Fittings

Installing batteries in the remote controller

Notes About the Remote Control

Remote control operation range

Connecting to Audio-Visual Components

Digital Connections

Connecting the Antenna

AM Loop Antenna and FM Indoor Antenna

Connecting for Power

Connecting Power Amplifiers

or Powered Speakers

Positioning your speakers

Preferred surround placement

Alternative Surround Placement

Getting Started ADP61 5

Operating Your ADP61

Panel introduction

The Remote Control

Remote Control Functions

Rear Panel Introduction

Display

Default Window Display Information

Power on / off / standby

Last State Memory

Tone Adjustment

Output Level Adjustment

Speaker

Sleep Function

Display Brightness Adjustment

Tuner Memory Operation

Retrieving Preset Stations

25-pin D-SUB Input

Speaker Settings (Speaker Mode)

Level Calibration

Input Source Selection

Input Source Reference Level Adjustment

Synchro Audio/Video Sources

Audio Format Recognition

Listen Mode Display

Tuner Functions

2 Stereo

6 Stereo

Dolby Pro Logic II Movie

Dolby Pro Logic II Music

Dolby Digital

Dolby Digital SurroundEX

DTS

DTS 96/24

DTS-ES Discrete

DTS-ES Matrix

Neo:6

About the Listening Modes 30

Sound Enhancement Systems 32

Dolby Pro Logic

Dolby Digital and Dolby Digital Surround EX

2/6 Channel Stereo

DSP(Digital Sound Field Processor)

DTS Neo:6

DTS/DTS ES

DTS 96/24

Adjusting the DTS,Dolby Digital LFE Level

Dynamic Range(Night Mode)

Adjusting the Delay Time

Adjusting the Parameter Settings for Pro

logic II MUSIC

Advanced Sound Control 30

Troubleshooting 36

General

Tuner

Remote Control

Other 40

Resetting Factory Presets

Abbreviation of the monitor and full

working name

Available Selection All Listening Modes

Specifications

Table of Content 3

Digital Sound-field Processing multi-mode

Other Features

Main Features:

Dolby Digital Decoder

DTS Decoder

Dolby Digital Surround EX Decoder

DTS 96/24 Decoder

DTS ES Discrete Decoder

DTS-ES Matrix Decoder

DTS Neo:6 Cinema

DTS Neo:6 Music

Dolby Pro Logic II Movie

Dolby Pro Logic II Music

6 CH Stereo Mode

2 CH Stereo Bypass Mode

8 DSP modes: Live, Cinema, Disco, Stadium, Jazz,

Church, Hall & Pro Logic

Manufactured under license from Dolby Laboratories.

"Dolby", Pro Logic", "Surround EX" and the double-D symbol

are trademarks of Dolby Laboratories.

DTS, and DTS ES ,Neo:6 and DTS 96/24 are

trademarks of Digital Theater Systems, Inc.

Up to 24-bit/192khz playback via digital inputs

High-resolution D/A converters

DSP effects, including surround (see DSP modes above)

Operation from front panel or IR remote control

Adjustable sub woofer x-over frequency

Adjustable Reference Volume for each input section (0-15db)

Enhanced Audio Features

Automatic Audio Format Recognition

Source Format Display

Bass Management system, Full Digital

Level individual

Pink Noise Generator for line and speaker test

Treble & Bass

Digital AM/FM tuner

64 Auto Memory Presets (AM/FM separate)

Quartz PLL Synthesized Digital Tuning system

Manual Tuning

Sleep Timer

, DSP

Fully functional remote control

Remote control standby

balanced XLR outputs

7 individual output level and on/off controls

1 analog stereo line output (pre volume-control)

1 digital coaxial input

1 AES/EBU input via XLR

4 S-video inputs, 1 S-video output

4 composite video inputs

1 composite video out

Sub-woofer x-over trim pot (50hz - 150hz)

Adjustable Reference for each

input section (0db to -15db)

trim pots (for FL & FR channels only)

Last State Memory, including routing and decode settings

2 XLR balanced inputs with pad switch (+4db, 0db & -10db)

1 digital optical input via TosLink

25-pin D-sub input connector (6-channels +4db bal.)

Getting Started ADP61

You should receive the following items:

Fittings

One instruction manual

Indoor FM antenna

AM loop antenna

2 x 19” EIU Rack Adaptors

One ADP61 unit One Remote Control

AAA,R3P,UM-4 batteries

Warranty Information:

Please fill online warranty card

on www.violetaudio.com

AAA,R3P,UM-4 batteries

VOLUME

User's Manual V1.2

ADP61

Violet Audio

Studio AV Preamp Decoder

User's Manual

VOLUME

Notes About the Remote Control

Should you find the remote controls response gradually

decreasing in range, the batteries are most probably reaching

the end of their life. Replace both batteries with new ones,

preferably of matching brand and type.

Remote Control Operation Range

The area between the remote control and the main unit must be

clear of large obstacles.

Do not expose the remote control sensor to strong lighting,in

particular an inverter type fluorescent lamp.Otherwise,the

remote control may not work properly. If necessary, position the

main unit away from direct lighting.

¡30

30¡

Within approximately

6m(19.7feet)

Battery Replacement

Notes

Since the remote control will be used for many of this unit's

control operations, you should begin by installing the supplied

batteries.

1.Turn the remote control over and slide the battery compartm-

ent cover in the direction of the arrow.

2. Insert the batteries(AAA,R03P,UM-4 TYPE) according to the

polarity markings on the inside of the battery compartment.

3.Close the battery compartment cover.

Use AAA,R3P,UM-4 batteries.

Be sure the batteries are correctly oriented according to polarity.

(See the illustration inside the battery compartment.)

Remove the batteries if the remote control is not used for an

extended period of time.

Should any battery leak, dispose of it immediately.

Avoid physical contact of leaked material with skin or clothing

etc. Clean compartment thoroughly before installing new

batteries. If in doubt, consult your dealer or service personnel.

Never dispose of batteries in a furnace or open fire.

Exposure to extreme heat or fire may result in an explosion

and cause possible injury!

Installing batteries in the remote controller

VOLUME

Getting Started ADP61

AC INLET

240V~50Hz 30W TIA 250V

Connecting to Audio-Visual Components

If you have a LD player, DVD player or CD player with a digital output, you can make use of an

optical digital cable (not supplied) or coaxial digital cable (not supplied) to carry the audio portion

of the signal and enjoy Dolby Digital sound quality.

One optical or coaxial cable is needed for each LD player, DVD player or CD player. This

receiver provides one optical, one coaxial and one XLR digital input for the connection of your

components. Please connect your components (e.g. LD, DVD, or CD) to the appropriate digital

inputs and press INPUT button to select your connection.

Note:

Optical and coax cables carry only the audio portion of the signal. A separate video connection

must also be established for a LD player and DVD player. S-video provides the best connection

for the video portion of the signal. Composite video (yellow RCA connector) can also be used. It is

important to use the same connection type (S-video or composite) to connect the LD or DVD

player to the ADP-61 and then from the ADP-61 to the TV, LCD or Plasma display.

199

Connect components

capable of outputting Dolby

Digital (e.g. DVD or LD) or

standard PCM(CD) format

digital signals. Read section

on "Digital Connections"

under "Getting Started".

CD Player

Digital Workstation

Tape Deck

VCR

DVD

AUDIO OUT Balanced

To AUDIO OUT (DVD)

To VIDEO OUT (DVD)

To S-VIDEO OUT (DVD)

To VIDEO OUT (VIDEO)

To AUDIO OUT(VIDEO)

To S-VIDEO OUT (VIDEO)

To AUDIO OUT(VCR)

To VIDEO OUT (VCR)

To S-VIDEO OUT (VCR)

To VIDEO IN (TV)

To AUDIO OUT (TV)

To S-VIDEO IN (TV)

Unit

Rear Panel

If your CD or DVD player is equipped with digital output jacks, you can enjoy superior sound quality

by making use of them.

S/PDIF Digital connections are possible via either a TOSLINK optical or a 75ohm co-axial cable with

RCA connectors. For a AES/EBU connection, a 105ohm digital XLR cable is required.

Once connected, simply select either Coax-1, Coax-2 or OPTICAL input for each connection.

Note: This receiver only has one of each digital input type. Yo u may have to use the optical for one unit,

while using the co-axial connection for another.

Also note: Digital cable quality will affect performance. To minimize jitter and other artifacts, only use

good quality, well shielded digital cables.

If your video component has a S-Video output connection,

you can enjoy enhanced video quality by connecting it to

one of the S-Video input sockets on the rear panel of the

ADP-61.

One video cable is needed for each component.

Note: Before plugging in any optical or S-Video cable, make

sure the shape or pin configuration of the plug and socket

match. Be careful not to apply excessive force when making

a connection!

25-pin D-Sub connection for 6 analog channels

i.e. Digidesign, Tascam, Mackie etc.

(+4db balanced) For details see p.29

menu menu

Getting Started ADP61

Multi-form at player/

Extern al decoder

DIGITAL AUDIO

WORKSTATION MIXING CONSOLE

Digital Connections

The corresponding video and

s-video input jack is: “DVD”.

The corresponding video and

s-video input is: “VIDEO”.

The corresponding video and

s-video input jack is: “TV”.

HINT

When hooking up an A/V unit, such as a VCR, make sure

to connect to all necessary terminals to the same name,

i.e. S-video or composite video as well as the 2xRCA analog

to all relevant sockets labelled “VCR”. The digital terminals also

correlate with certain video sockets (see HINT in next column)

Be sure to attach the dust covers when the OPTICAL terminals

are not being used. This prevents contamination by dust etc.

For accurate DTS-decoding, the DTS bitstream integrity must

never become compromised. Incorrect or poor quality cables

and connectors can corrupt the bitstream and degrade

performance.

In order to prevent digital errors and enjoy optimal

performance, please use dedicated, good quality digital

cables.

For S/PDIF: 70ohm digital co-axial or TosLink optical.

For AES/EBU: 110ohm balanced digital co-axial cable.

All digital audio signal input terminals accept the following

sample rate frequencies: 32 kHz, 44.1kHz, 48kHz, 96kHz

& 192kHz.

Quality of digital cables and connectors do have a bearing

on sound quality and performance. Keep cable lengths to

a minimum.

If your CD, LD, DVD, TV/satellite tuner or DAW etc, are

equipped with a either coaxial, optical or AES/EBU XLR

digital output terminals, you can take advantage of this

sonically superior connectivity by utilizing the corresponding

input sockets on the ADP61's rear panel

Digital audio signals are not prone to the same type of signal

loss and distortion factors as observed with typical analog

connections. Digital connections are especially recommended

when decoding multi-channel surround information, such as

Dolby Digital and DTS from LD, DVD, CD players, and

other digital sources.

To make an optical digital connection between this unit and an

external unit, remove the cover from each optical terminal, and

then connect them by using a commercially available optical

fiber cable that conforms to EIAJ standards.Other cables might

not function correctly.

Even if you connect an audio/video unit to the OPTICAL (or

COAXIAL) terminal of this unit, you must keep the unit connec-

ted with the same named analog audio signal terminals of this

unit, because digital signal cannot be recorded by a tape deck

or VCR connected to this unit. You can switch the selection of

input signals between digital and analog easily.

DVD

COAXIAL OUT

OPTICAL OUT

S-VIDEO OUT

VIDEO OUT

Notes

Getting Started ADP61

AM Loop Antenna and FM Indoor Antenna

Uncoil the Antenna wire.

Press down on the Antenna tab to open the terminal.

Connecting the Antenna

The AM and FM antennae connect to the top left section

of the rear panel of the ADP-61.

They must be hooked up in order to receive clear reception.

HINT

For best FM reception, extend antenna to its

full length and position at highest possible

elevation.

For AM, rotate the antenna horizontally

for optimum reception.

1. 2.

AM Antenna

wire Connection

Connecting for Power

Make sure you connect up all your

other electronic components and

the speakers before plugging your

receiver into the outlet. Plug the

power cord in the wall outlet,

matching the wide blades of the

plug with the wide slots of the outlet.

Be sure to insert the plug

completely.

Notes:

Do not play audio at a high volume. Hearing experts

advise against continuous extended play.

If you experience a ringing in your ears, reduce volume or

discontinue use.

Always turn down the volume before connecting your speakers

Getting Started ADP61

AC INLET

240V~50Hz 30W TIA 250V US power plug

European power plug Australian power plug

Andere Handbücher für ADP61

Andere Violet Audio Medienkonverter Handbücher

Violet Audio

Violet Audio ADP61 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung