*
QUICK INSTALLATION GUIDE
2 Megapixel FULL HD Box Camera
◆
Uncompressed high quality Full HD video with full frame rate
Full HD video transmission up to 100M
1920X1080 60p/50p/25p/30p, 1280X720 60p/50p/30p/25p
Enhanced WDR performance
Quick and easy OSD control
Diverse Video output for diverse applications
(HD-SDI & Composite)
2D/3D DNR (Digital Noise Reduction)
Defog function
Dynamic digital zoom and PIP
Pelco-C support (CVBS output with optional controller)
Privacy Masking (8 Polygon Area)
Supports 15 Languages
RS-485 Interface for external control of OSD
(Using controllers, etc.)
12VDC or 12VDC/24VAC
Special features
Dear Customers!
By selecting this product, you have decided to use a professional device that
guarantees highest quality and reliability. We would like to thank you very much
for your confidence and kindly ask you to read the following instructions carefully
before installation and operation in order to take full advantage of all quality
features regarding this product.
CAUTION
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
The lighting flash with an arrowhead symbol, within an equilateral triangle
is intended to alert the user to the presence of non-insulated dangerous
voltage within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION
This equipment has been tested and found to comply with limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at its
own expense.
WARNING
Changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.
CAUTION – To prevent electric shock and risk of the fire hazards
Do NOT use power source other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should conform to
all local codes.
1. Precautions
• Please read the manual carefully before the installation in order to
set up the camera correctly and to obtain the best picture quality.
• Please keep the manual in good condition for your future reference
and service application.
• Installation and services should be only carried out by an authorized
personnel according to local safety regulations.
• If any liquid or solid matter gets into the housing, immediately
disconnect the camera from power supply and have it checked by
your authorized dealer before reusing.
• Avoid installing the camera at extremely hot or cold places.
• Avoid installing the camera at a place of high humidity.
• Avoid installing the camera at the place exposed to gas or oil.
• If you are not a certified person, never try to dismantle the camera.
To avoid electric shock, never remove the screws or covers.
There are no parts inside that need maintenance by the user.
All maintenance should be carried out by qualified personnel.
• Keep the top glass of the lens always clean in order to obtain the
best picture quality all the time. Be careful not to be stained by
fingerprint.
• Don't face the camera directly toward sunlight or sunlight reflecting
area. Image Sensor may go defective at this condition.
• Please give a special attention to keep the unit from dangerous
drop or external shock during the process of transportation or
handling.
• Never try to touch the camera in wet hand. It may cause an electric
shock.
• Do not expose the camera to radioactivity. It causes a serious
damage on the Image Sensor.
2. Limitation of liability
This publication is provided “AS IS” without warranty of any kind, either express
or implied, including but not limited to, the implied warranties of merchantability,
fitness for any particular purpose, or non-infringement of the third party's right.
This publication could include technical inaccuracies or typographical errors.
Changes are added to the information herein, at any time, for the improvements
of this publication and/or the corresponding product(s).
3. Disclaimer of warranty
In no event shall seller be liable to any party or any person, except for
replacement or reasonable maintenance of the product, for the cases,
including but not limited to below:
(1) Any damage and loss, including without limitation, direct or indirect,
special, consequential or exemplary, arising out of or relating to the
product;
(2) Personal injury or any damage caused by inappropriate use or negligent
operation of the user;
(3) Unauthorized disassemble, repair or modification of the product by the
user;
(4) Inconvenience or any loss arising when images are not displayed, due to
any reason or cause including any failure or problem of the product;
(5) Any problem, consequential inconvenience, or loss or damage, arising
out of the system combined by the devices of third party.
(6) Any claim or action for damages, brought by any person or organization
being photogenic subject, due to violation of privacy with the result of that
surveillance-camera's picture, including saved data, for some reason,
becomes public or is used for the purpose other than surveillance.
Camera x 1
Auto Iris Lens Plug x 1
C-Mount Adaptor x 1
Installation
guide x 1
L-Wrench x 1
(Ø0.84)
QUICKINSTALL GUIDE
TrueDay / Night Box Camera
◆
Special features
Uncompressedhigh quality Full HD video with full frame rate
FullHD video transmission up to 100M
1920X108060p/50p/25p/30p, 1280X720 60p/50p/30p/25p
EnhancedWDR performance
Quickand easy OSD control
DiverseVideo output for diverse applications.
(HD-SDI& Composite)
2D/3DDNR (Digital Noise Reduction)
Defogfunction
Dynamicdigital zoom and PIP
Pelco-Csupport (CVBS output with optional controller)
PrivacyMasking (8 Polygon Area)
Supports15 Languages
RS-485Interface for external control of OSD
(Usingcontrollers, etc. )
12VDCor 12VDC/24VAC
4. Package
5.Name and function of each part
5‐1. Right side
Auto IRIS Lens Connector
5-2. Front / Bottom side
2- 1/4"-20UNC
2- 1/4"-20UNC
Fixture can be separated and attached on the bottom side as well.
lease use the supplied clamp screws only to change the position of
the bracket. Using screws more than 5mm depth can do a serious
damage to the inside of this camera.
* Use an international standard 1/4”-20 mounting screw to install the
camera.
Protection Cover
Take off the protection cover.
5.Name and function of each part
5-3. Rear side
12VDC
HD-SDICVBS
TRx TRx GND D/N
POWER
①OSD Control button.
②Power indicator LED Lamp is on when the power is being
supplied.
③CVBS output (BNC Female)
Connect coaxial cable for composite video signal out.
④HD-SDI output (BNC Female)
Connect coaxial cable for HD-SDI signal video signal out.
⑤RS-485 Control port
You can control SETUP menu through this port by using external
controllers like a remote controller that RS-485 Communication is
supported.
⑥Day & Night Out port
This unit can be synchronized by an External IR LED kit through
this port.
Low : Color(LED Off), High : B/W(LED On)
⑦Power input terminal
Connect to the power source.
Polarity of the power is self-configured. (Non-polarity).
6. Installation
6-1. Lens
Lens is not supplied with the unit. C-Mount or CS-Mount type of lens
is useable. Please select a lens that has a good F-Stop number in
order to get the best picture quality. Use of DC auto iris lens is
recommended to achieve the best results for operating this product
effectively.
☞Caution
Please make sure the surface of the lens be always clear. Clean dirt
or water drops with soft cloth in order to avoid the picture blooming
or reflection.
☞Note
To get the best image quality, please use recommended lenses from
the manufacturer or camera supplier.
1. Please take off the sleeve outer cable of the lens by 10mm.
2. Please take off the sleeve inner cable of the lens by 2mm.
6-2. When using an auto iris lens (DC-drive)
①
②
③ ④
⑤
⑦
⑥
