Visionhitech VC58S Bedienungsanleitung

version 1.0.1

WDR True Day/Night Box camera

INSTRUCTION MANUAL

12VDC/24VAC

Please read this manual carefully before installation and operation of the product.

version 1.0.1

Dear Customers!

By selecting this product, you have decided to use a professional device that guarantees highest quality and

reliability. We would like to thank you very much for your confidence and kindly ask you to read the following

instructions carefully before installation and operation in order to take full advantage of all quality features

regarding this product.

The lighting flash with an arrowhead symbol, within an equilateral

triangle is intended to alert the user to the presence of non-insulated

dangerous voltage within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

INFORMATION

This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the interference at its own

expense.

WARNING

Changes or modifications not expressly approved by the manufacturer could void the user’s authority to

operate the equipment.

CAUTION –To prevent electric shock and risk of the fire hazards

-Do NOT use power source other than that specified.

-Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and should conform to all local codes.

version 1.0.1

Table of contents

Installation manual

1. Precautions --------------------------------------------------------------------------------4

2. Limitation of liability --------------------------------------------------------------------5

3. Disclaimer of warranty -----------------------------------------------------------------5

4. Package --------------------------------------------------------------------------------------6

5. Special features of the model -------------------------------------------------------7

6. Name and function of each part-------------------------------------------------8~9

7. Installation ---------------------------------------------------------------------------10~12

8. Troubleshooting -------------------------------------------------------------------13~14

9. Dimension (mm) -----------------------------------------------------------------------14

10. Specification----------------------------------------------------------------------------15

OSD Manual

For function control-------------------------------------------------------1~8

version 1.0.1

1. Precautions

Please read the manual carefully before the installation in order to set up the camera correctly and to

obtain the best picture quality.

Please keep the manual in good condition for your future reference and service application.

Installation and services should be only carried out by an authorized personnel according to local safety

regulations.

If any liquid or solid matter gets into the housing, immediately disconnect the camera from power supply

and have it checked by your authorized dealer before reusing.

Avoid installing the camera at extremely hot or cold places.

If you are not a certified person, never try to dismantle the camera. To avoid electric shock, never remove

the screws or covers. There are no parts inside that need maintenance by the user. All maintenance should

be carried out by qualified personnel.

Avoid installing the camera at a place of high humidity.

Avoid installing the camera at the place exposed to gas or oil.

Keep the top glass of the lens always clean in order to obtain the best picture quality all the time. Be

careful not to be stained by fingerprint.

Don't face the camera directly toward sunlight or sunlight reflecting area.

CCD may go defective at this condition.

Please give a special attention to keep the unit from dangerous drop or external shock during

the process of transportation or handling.

Never try to touch the camera in wet hand. It may cause an electric shock.

Do not expose the camera to radioactivity. It causes a serious damage on the CCD.

version 1.0.1

2. Limitation of liability

This publication is provided “AS IS”without warranty of any kind, either express or implied, including but not

limited to, the implied warranties of merchantability, fitness for any particular purpose, or non-infringement of

the third party's right. This publication could include technical inaccuracies or

typograp

hical errors. Changes

are added to the information herein, at any time, for the improvements of this publication and/or the

corresponding product(s).

3. Disclaimer of warranty

In no event shall seller be liable to any party or any person, except for replacement or reasonable maintenance

of the product, for the cases, including but not limited to below:

(1) Any damage and loss, including without limitation, direct or indirect, special, consequential or exemplary,

arising out of or relating to the product;

(2) Personal injury or any damage caused by inappropriate use or negligent operation of the user;

(3) Unauthorized disassemble, repair or modification of the product by the user;

(4) Inconvenience or any loss arising when images are not displayed, due to any reason or cause including any

failure or problem of the product;

(5) Any problem, consequential inconvenience, or loss or damage, arising out of the system combined by the

devices of third party.

(6) Any claim or action for damages, brought by any person or organization being photogenic subject, due to

violation of privacy with the result of that surveillance- camera's picture, including saved data, for some

reason, becomes public or is used for the purpose other than surveillance.

version 1.0.1

4. Package

Camera x 1 Instruction manual x 1

OSD manual x 1

Auto Iris Plug x1 C-Mount Adaptor x 1 RS-485 Lead Wire x 1

version 1.0.1

5. Special features

1. Higher resolution of 700TVL (D) / 750TVL (N)

This unit has an innovative way of increasing total resolution to more than 30% higher than that of

conventional 600TVL cameras.

2. Unbeatable WDR Performance

This unit intelligently analyzes the exposure ratio and optimizes the WDR process to provide

unbeatable image quality, especially in bright environments. A normal WDR sensor has difficulty with

low-contrast scenes. The non-linear process results in lower shadow detail in many scenarios. The

advanced WDR balances the wide dynamic process, retaining detail under a wider range of lighting

conditions.

3. Super Low Light sensitivity

Conventional WDR cameras use a Double Scan CCD to extend dynamic range. However, this comes at

the expense of light sensitivity, requiring twice as much light compared to a Single Scan CCD. WideLux

double scans the CCD in situations requiring WDR. When the ambient lighting becomes weak,

WideLux reverts back to single scan mode, greatly increasing light sensitivity. With this special

technology, it provides remarkable low light sensitivity of 0.1Lux/F2.0 ~ 0.0001Lux w/ 512x Sens-up,

which is as much as 3 times better than conventional WDR cameras.

4. 2D/3D Noise Reduction

2D/3D DNR compliments the new WDR technology to provide clear, low noise images. 2D & 3D

filtering reduces noise, which can save the hard drive space on your DVR. 2D DNR helps preserve

edges in the picture, while 3D DNR reduces ghost effect,

5. DIS (Digital Image Stabilizer)

This digital technology reduces blurring caused by camera vibration. By providing available pixels

outside the visible frame, this buffer allows dynamic realignment to improve picture clarity. This also

allows slower shutter speeds under lower light conditions, minimizing object motion blur.

6. Anti-Color Rolling

Fluorescent lighting can adversely affect color when a camera is in WDR mode. “Color Rolling”can occur as a

result of asynchronous operation of the camera and the light. Color shift, changing tint and shimmering edges

are common. Our advanced WDR technology uses adaptive timing to sync to fluorescent light. This virtually

eliminates the color rolling effect!

6. Name and function of each part

6-1. Front

C-Mount lens adaptor

Protective cover

version 1.0.1

6-2. Right side

Intelligent

Photo sensor

Day/Night mechanical

filter changer

(Inside)

Auto IRIS conn.

1/3” Sony super HAD

CCDII & WDR chipset

Back focus adjustment Knob

(Tolerance + / - 0.5mm)

Fixture

- Back focus adjustment Knob: Fine tune the Back Focal Length

6-3. Bottom

Fixture

1/4”-20 mounting thread

Fixture can be separated and attached on the bottom side as well.

Please use the supplied clamp screws only to change the position of the bracket.

Using screws more than 5mm depth can do a serious damage to the inside of this camera.

* Use an international standard 1/4”-20 mounting screw to install the camera.

version 1.0.1

6-4. Rear side

Power indicator

OSD function control key

Video out

(BNC)

RS-485

Power In

(Non polarity)

- Power indicator: Red LED ON when camera’s operational.

- OSD function control key

- VIDEO OUTPUT: BNC-Female.

- POWER INPUT: Power input terminal.

version 1.0.1

7. Installation

7-1. Lens

Lens is not supplied with the unit. C-Mount or CS-Mount type of lens is useable.

Please select a lens that has a good F-Stop number in order to get the best picture quality. Use

of DC auto iris lens is recommended to achieve the best results for operating this product

effectively.

☞Caution

Please make sure the surface of the lens is always clear. Clean dirt or water drops with soft cloth

in order to avoid the picture blooming or reflection.

7-2. When using an auto iris lens (DC-drive)

1. Please take off the sleeve outer cable of the lens by 10mm

2. Please take off the sleeve inner cable of the lens by 2mm.

Pin No.

Lens

No.1 Pin

Damping -

No.1 Pin

Damping +

No.1 Pin

Drive +

No.1 Pin

Drive -

3. Solder the wires on the pin-connector (iris-jack) supplied with the lens according to the

pin configuration as shown in the drawing.

4. Assemble the lens.

5. Connect the Auto Iris jack.

6. Adjust the DIP S/W to DC according to the type of lens.

Inhaltsverzeichnis

Andere Visionhitech Sicherheitskamera Handbücher

Visionhitech

Visionhitech VD70CS(X) - 36IR Bedienungsanleitung

Visionhitech

Visionhitech VN6XSFHD2 Bedienungsanleitung

Visionhitech

Visionhitech VD120TH-12 Bedienungsanleitung

Visionhitech

Visionhitech VD70CSHR-36IR Bedienungsanleitung

Visionhitech

Visionhitech VPD200SM2i Handbuch

Visionhitech

Visionhitech VB21S3 Bedienungsanleitung

Visionhitech

Visionhitech VQ29SFHD2 Bedienungsanleitung

Visionhitech

Visionhitech VC58EP-12 Bedienungsanleitung

Visionhitech

Visionhitech VC58EHi Handbuch

Visionhitech

Visionhitech VN6XEH Bedienungsanleitung

Visionhitech

Visionhitech VDA100EHi Handbuch

Visionhitech

Visionhitech VDA101S3-VFIR Bedienungsanleitung

Visionhitech

Visionhitech VD80AHD Bedienungsanleitung

Visionhitech

Visionhitech VC58SMi Bedienungsanleitung

Visionhitech

Visionhitech VD101SMi Handbuch

Visionhitech

Visionhitech VD80SFHD2-VF Bedienungsanleitung

Visionhitech

Visionhitech VDA30PN Bedienungsanleitung

Visionhitech

Visionhitech VD70S3 Series Bedienungsanleitung

Visionhitech

Visionhitech VA300 Bedienungsanleitung

Visionhitech

Visionhitech VC56TH -12 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung