Visionis VIS-3025 Bedienungsanleitung
User Manual
Access Control Indoor/Outdoor
Weatherproof, WIFI + Digital Touch Keypad +
Reader Standalone and Wiegand
With Doorbell
VIS-3025
www.visionistech.com
1
1. Description
3. Specification
The device is a standalone access control and proximity card
reader which supports EM & MF card types. It builds-in STC
microprocessor, with strong anti-interference ability, high
security and reliability, powerful function and convenient
operation. It’s widely used in high-end buildings, residential
communities and other public places.
• Ultra-low Power: Standby current is less than 30mA
• Wiegand Interface: WG26 or WG34 input and output
• Searching time: Less than 0.1s after reading card
• Backlight keypad: Operate easily at night
• Doorbell interface: Support external wired doorbell
• Access ways: Card, PIN code, Card & PIN code, Mobile App
(Tuya)*
• Independent codes: Use codes without related card
• Change codes: Users can change codes by themselves
• Delete users by card No.: The lost card can be deleted by
keyboard
*The mobile app only OPENS and CLOSES the door via Wi-Fi.
It DOES NOT HAVE reports, events, and other features.
• Working Voltage: DC12-24V
• Standby Current: ≤30mA
• Card Reading Distance: 2~5cm (0.79~1.97in.)
• Capacity: 2000 users
• Working Temperature: -49°C ~ 60°C (-40°F ~ 140°F)
• Working Humidity: 10%~90% RH
• Lock output load: ≤3A
• Door Relay time: 0~99S (Adjustable)
2. Features
Drill hole according to the size of the device and fix the back shell
with the equipped screw. Thread the cable through the cable hole.
Connect the wires according to your required function, and wrap the
unused wires to avoid short circuit. After connecting the wire, install
the machine.
4. Installation
2
5. Wiring
Color ID Description
Green
White
Yellow
Red
Black
Blue
Purple
Orange
Pink
Pink
D0
D1
OPEN
+12V
GND
NO
COM
NC
BELL_A
BELL_B
Wiegand Input (Wiegand Output in Card Reader
Mode)
Wiegand Input (Wiegand Output in Card Reader
Mode)
Exit Button input terminal
12V + DC regulated power input
12V - DC regulated power input
Relay normally-on terminal
Relay public terminal
Relay normally-off terminal
Doorbell button one terminal
Doorbell button to the other terminal
3
6.1 Diagram Common Power Supply
6.2 Diagram Special Power Supply
6.3 Diagram Reader Mode
4
7. Sound and Light Indication
Operate Status LED Light Color Buzzer
Standby Red
Keypad Beep
Operation Successful Green Beep
Operation Failed Beep-Beep-Beep
Entering Programming Red Flash Red Slowly Beep
Programmable Status Orange
Exit Programming Red Beep
Door Opening Green Beep
5
8. Advance Setting
Change the
master code
Default factory
master code is
999999.
Cards can be
added
continuously
Card number
can be added
continuously
Add card
Add card number
Add ID number+
card
Add ID number+
card number
Add PIN code
Add user with
specify ID
number, easily
find and delete.
ID number is
from 1-2000
* Master code # 1
Read card # ... #
Add user with
specify ID number,
easily find and
delete.
Add Users Notes
1
Delete card Cards can be
deleted
continuously
When the card is
broken or lost,
you can delete
the user by ID
number
Delete ID
number
Delete Users Notes
2
* Master code # 2
Read Card or 8 or 10 digits
#
* Master code # 2
ID Number #
* Master code # 0
New code # New code
#
* Master code # 1
8 digits or 10 digits #
* Master code # 1
ID number # Read card #
* Master code # 1
ID number #
8 digits or 10 digits #
* Master code # 1
ID number #
4 digits Pin code #
6
Delete ALL PIN
code & card users
except public PIN
code
Delete ALL
users
By card
By card+PIN
code
By card or
PIN code
To enable this
function, the user
PIN code has to be
changed.
Both card user and
PIN user could
unlock the door
(factory default)
Only the card user
could unlock the
door, keypad is
invalid
* Master code # 2
0000 #
3
* Master code # 3 0
#
* Master code # 3 1
#
Door relay
strike time
Door opening time
range: 0-99s
Default 5s
* Master code # 4
0~99 #
* Master code # 3 2
#
Standalone
access
control mode
The door will be
locked automatically
after open the door
normally
* Master code # 50
#
Relay toggle
mode
The door will not be
locked automatically.
To lock the door, the
user has to read the
card or press the exit
button.
* Master code # 51
#
Reader mode WG26/34 input and
output
* Master code # 52
26/34 #
4
5
2
Access Users Notes
Relay Output Delay Time Notes
7
Note: All of codes will be modified except public
code.
8
Bind a code to
a specific card
When using
card+code to unlock
the door
Send the data to
external device
The device will
receive the data
Data backup
output
Data backup
input
Add public code
Change the
code by user
card
Change the
code by ID
number added
6
9
Reset to
Factory Default
Power off, press the exit button continuously,
power on, hearing beep sound twice, meanwhile,
the indicator light turns orange, swipe the first card
as for master add card, swipe the second card as
for the master delete card, the master code has
been reset to 999999, factory default settings are
successful.
*Registered user data won’t be deleted when reset
to factory default
* Master code # 9
4 digits code #
*
* Read card New code #
Repeat new Code #
7
* Master code # 6
Read Card 4 digits code
#
* Master code #
7 0 #
Only one public code
is available.
Delete public code:
* Master code #
9 #
* Master code #
7 1 #
WiFi match(optional)
WiFi matching * Master code #
7 3 #
* ID Number # Old code # new code
# Repeat New code #
8
9. Master Card Operation
Note: The master add card is used to add card users
continuously and quickly. When you read the master add card
at the first time, you will hear a short "BEEP" sound twice and
the indicator light turns orange, it means you have entered into
add user programming. When you read the master add card at
the second time, you will hear a long "BEEP" sound once and
the indicator light turns red, it means you have exited the add
user programming.
Read master add card , Read the 1st user card
Read the 2nd user card …, Read master add card
9.1 Add Card
Note: The master delete card is used to delete card users
continuously and quickly. When you read the master delete
card at the first time, you will hear a short "BEEP" sound twice
and the indicator light turns orange, it means you have entered
into delete user programming. When you read the master delete
card at the second time, you will hear a long "BEEP" sound
once, the indicator light turns red, it means you have exited the
delete user programming.
Read master delete card , Read the 1st user card
Read the 2nd user card … , Read master delete card
9.2 Delete Card
Example: Backup the data of machine A to machine B
The green wire and white wire of machine A connects with the
green wire and white wire of machine B correspondingly, set B
for receiving mode at first, then set A for sending mode, the
indicator light turns green flash during the data backup, data
backup is successful when indicator light turns red.
10. Data Backup Operation
9
Mobile APP Download Guide
1. Scan QR code to download APP
or search TuyaSmart to download
APP.
2. Open APP, tap add
device.
3. Tap on Add Manually, then tap
on Security & Video Surveillance
and then select Safe Box (Wi-Fi)
Inhaltsverzeichnis
Andere Visionis IP-Zugriffskontrollsysteme Handbücher
Visionis
Visionis VIS-3002 Bedienungsanleitung
Visionis
Visionis VIS-3103 Bedienungsanleitung
Visionis
Visionis VIS-3024 Bedienungsanleitung
Visionis
Visionis VIS-3008 Bedienungsanleitung
Visionis
Visionis VIS-3100 Bedienungsanleitung
Visionis
Visionis VIS-8013 Bedienungsanleitung
Visionis
Visionis VIS-3013 Bedienungsanleitung
Visionis
Visionis VIS-3003 Bedienungsanleitung
Visionis
Visionis VIS-7101 Bedienungsanleitung
Visionis
Visionis VIS-3004 Bedienungsanleitung
Visionis
Visionis VS-AXESS-4D-ETL-PCB Bedienungsanleitung
Visionis
Visionis VIS-3009 Bedienungsanleitung
Visionis
Visionis VS-AXESS-2D-ETL-PCB Bedienungsanleitung
Visionis
Visionis VIS-8014 Bedienungsanleitung
Visionis
Visionis VIS-7102 Bedienungsanleitung
Visionis
Visionis VS-AXESS-4DLX Bedienungsanleitung
Visionis
Visionis VIS-3000 Bedienungsanleitung
Visionis
Visionis VS-AXESS-1ETL Bedienungsanleitung
