VisionTek CANDYBOARD RF06 Bedienungsanleitung

USERS MANUAL

Model RF06

2 3

Safety Precautions

Safety Matters

Please refer to all safety precautions covered in this user

manual to prevent injury or damage.

This product contains a rechargeable lithium-ion battery. All

safety precautions should be taken into consideration when

handling and or operating any type of device that is pow-

ered by a battery such as this product. Do not drop, heat,

crush or submerge this product in water. Do not operate this

device in extreme humidity, heat or cold environments for

long periods of time. Misuse of this device may cause injury

and will void the device’s warranty.

Attention to trafc safety

Do not operate or attempt to operate this device

while driving or operating any moving vehicle.

Aircraft Safety

Please do not operate or attempt to operate this

device while on board an aircraft. Doing so may

cause interference with the aircrafts operations

and communications devices.

Combustible Agents and Chemicals

Please turn the device off while around fuel or

any combustible agents or chemicals.

Turn off this device in the hospital

Please do not operate or attempt to operate

this device in a hospital. Doing so may cause

interference with medical operations and

communications devices. As with all wireless

devices, this product may interfere with

implanted cardiac pacemakers, hearing aids

and other medical implant devices.

Interference

All wireless devices may be subject to

interference, thus affecting the performance

of this product.

Replacement parts

Do not use any replacement parts other

than those provided or recommended by the

manufacturer.

Do not look directly at or point the laser at

eyes. Doing so may cause permanent dam-

age or blindness.

4 5

OVERVIEW

This device is a combo 2.4GHz Wireless mini QWERTY

mini keyboard and Touch Pad combo with USB interface

receiver. In addition to standard keyboard functionality,

this device offers multimedia control keys and PC gaming

control keys. It has a built-in programmable smart touch

pad. This touchpad can be used in horizontal and vertical

directions. It also has power indicator, RF signal indicator,

CAPSLOCK light, low-voltage indicator and keypad back-

light to facilitate the use in dark environments.

In addition, this mini keyboard is also a universal infrared

remote controller with learning function. The remote control

is very effective at identifying unknown format with a wide

and reliable range of learning formats which means about

99.9% TV infrared remote control on the market can be

learned .After learning, the signals can be transmitted with

a high precision wide learning range of 20kHz~60kHz and

a small frequency error of (±1kHz).

Touchpad

The touchpad can be used in a horizontal or vertical posi-

tion. To switch between horizontal or vertical mode, hold

the Fn key and hit the Alt key.

Wireless 2.4G receiver

Connecting the receiver

Take out the 2.4G dongle from the giftbox, and insert

to the device into a standard USB interface. Once con-

nected, slide the power switch to the “ON”

position located on the left side of the unit to establish

the connection.

Enabling the backlight

Once the keyboard has established a connection to the

receiver, the backlight keys will automatically turn on for

3 seconds. The backlight will turn off after 3 seconds to

preserve battery life. To manually turn the backlight on,

simply press the key with light bulb symbol on upper left

hand corner.

Auto sleep and wake feature

The keyboard also features an auto sleep and auto

wake mode. If there is a long period of inactivity, the

keyboard will automatically go into a sleep mode. Dur-

ing the sleep mode, the user can wake the unit up by

pressing any key. The 2.4 GHz receiver and keyboard’s

RF indicator will continue to ash and will not power

down

6 7

Charging the battery

This device utilizes a built- in lithium-ion battery, please use

only approved data lines and chargers. Note: Fully charge

the unit before operating for the rst time. This device can

be used when charging, but will extend the charging time.

When the battery is low, the low-voltage light will ash

to warn the user. The unit will automatically turn off if the

battery has been depleted.

Note: Fully charge the unit before operating for the rst

time. This device can be used when charging, but will

extend the charging time.

How to operate

1 Press the Set1/Set2 of “remote” for 3 seconds, the

remote’s light will ash once time then stay on for long-time

2 Aim the remote’s infrared LED at your original remote

control’s infrared LED in parallel alignment (PS: the relative

distance not more than 7 cm), then press any button on

remote, the remote’s light will ash two times then long¬time

on, it is in learning status.

3 Press any button on original remote control, remotes light

will ash three times then another long light when success-

fully learned.

4 Repeat the step 2-4, until nish learning all keys.

5 Press the set key or 10 seconds without any operation, the

device will retire from the learning state.

8 9

Basic functions

RF matching

The device has been pre-coded at the factory to match a

keyboard to the receiver. This ensures that two or more

of the same device will not interfere with each other on

the same wireless spectrum. In the event this device is

in conict with another wireless device, you can change

channels to avoid interference by pressing the two keys

FN and F1 about 10 seconds. The RF indicators will ash

from slow to rapid. Once the channel has changed, the RF

indicator will fall back to a slow ash conrming that the

change was successful.

Appendix

Technical parameters

Specication

• Measurements (L x W x H): 151.1mm x 59mm x 3.8mm

• Weight (grams): 100g / 0.22 lbs

• Operational Range: up to 10 meters/ 30 feet

• Output power (db): +4db Max.

• Operation voltage: 3.3V

• Operation current: < 150mA

• Charging current: < 350mA

• Hibernation current: < 1mA

Supported Environment

• Windows 2000,Windows XP, Windows Vista ,Windows

CE, Windows 7

• Linux(Debian-3.1,Redhat-9.0 Ubuntu-8.10 Fedora-7.0

tested)

• Microsoft Xbox 360 (*may require rmware update)

• Sony PS3* (*may require rmware update)

Maintenance

• Do not attempt to disassemble the device or replace

rechargeable battery. Doing so will void the warranty.

• The battery will discharge if stored for a long period of

time without usage.

• Use the specied charger. Disconnect the device after

the battery has been fully charged. Overcharging the

battery will shorten the life span of the battery.

• Do not expose the device in extreme heat or cold.

Extreme temperatures will cause the life span of the

battery to shorten.

• Use only a damp cloth with mild soap to clean the

device. Solvents and other cleaning agents may cause

damage to the device.

Troubleshooting

Below are some basic troubleshooting options for the

device. Please contact VisionTek Technical Support at sup-

port.visiontek.com if you are unable to resolve any issues

with the device.

10 11

Unit does not

respond

Keyboard can-

not establish a

connection to

the receiver.

The mouse

pointer moves

erratically and/

or unrespon-

sive.

The unit does

not charge.

1. Low battery

power.

2. Unit is not turned

on.

1. The receiver

may not be inserted

correctly.

2. Possible wireless

interference with

another device.

1. Device may not

be within optimal

range of the re-

ceiver

2. Dust or oil on the

touchpad.

1. Check connec-

tions.

2. Defective battery.

1. Charge the

device for at least

15 minutes.

2. Check if the

switch selected to

the “ON” position.

1. Disconnect and

reconnect the

receiver to the USB

port.

2. Change the

channel of the

device by pressing

and holding the

Fn+ F1 key for 10

seconds and let the

unit reconnect.

1. Bring the unit

closer to the

receiver.

2. Clean the touch-

pad with a damp

cloth.

1. Verify if the

device is securely

connected to the

charger.

2. Contact Vision-

tek for support.

Problem Possible Issue Solution

Packing list

This equipment package contains the following items:

Candyboard Wireless Keyboard 1 unit

Wireless receiver 1 unit

USB-A to Mini-B Charge only Cable 1 unit

User Manual 1 unit

One Year Warranty

Products Covered:

Candyboard Wireless Keyboard Model RF06

VisionTek Products LLC, (“VisionTek”) is pleased to

warrant to the original purchaser (“Warrantee”) that

the product will be free from manufacturing defects in

material for One (1) Year when given normal and proper

usage. You must register product at www.visiontek.com

to be eligible for 1 year warranty program.

The provisions of this warranty shall not apply if, in

VisionTek’s sole judgment, the product has been

subjected to incidental damage including but not limited

to the following:

- Removal of Serial/Part number sticker(s)

- Damaged while being installed

- Damaged by software or hardware by someone

other than VisionTek or by motherboard, laptop, USB

port, Wi, Blue tooth, or improper use.

- Damaged by tampering, user error, disaster, mis-

use, neglect, abuse, power supply, power application,

12 13

alteration, repair, modication, a x or replacement by

an unauthorized technician that in any way affects its

performance or reliability.

VisionTek’s liability under this warranty, or in connection

with any other claim relating to the Product, is limited to

the repair or replacement, at VisionTek’s option, of the

product or portion of the product which is defective in

manufacturing material. Warrantee assumes all risk of loss

in transit. The returned products shall be the sole property

of VisionTek. VisionTek warrants the repaired or replaced

Products will be free from manufacturing defects in mate-

rial for the remainder of the warranty period.

VisionTek reserves the right to impose a reasonable

charge for the repair of products returned with defects

resulting from any of the above causes and for returns

where the product is found to be in good working condi-

tion.

VisionTek reserves the right to replace any defective

VisionTek product with an equivalent or superior product

at VisionTek’s sole discretion. Such replacement product

may be a remanufactured product or manufactured using

remanufactured components at VisionTek’s option. The

repaired or replaced product will be covered by the same

warranty as the original product.

To receive warranty service, contact VisionTek’s Technical

Support department. Before returning any product for

service, you must have rst communicated with one of our

service representatives. The service representative will

issue a Return Material Authorization (RMA) request and

additional instructions for receiving the RMA number. No

VisionTek product will be accepted for warranty service

without a copy of a valid proof of purchase and an RMA

number. Your sales receipt or invoice from a retail store

is your proof of purchase. The warrantee shall pay

the cost of returning the defective product to and from

VisionTek’s service center.

No other warranties are expressed or implied, including

but not limited to, any implied warranties of merchant-

ability or tness for a particular purpose. In no event shall

VisionTek be liable for any consequential or incidental

damages resulting from the use or installation of any Vi-

sionTek product, or the breach of any express or implied

warranties. VisionTek’s liability to any warrantee with

respect to any claim or loss arising out of this transaction

or alleged to have resulted from an act or omission of

VisionTek shall be limited to warrantee’s cost of the

VisionTek product.

Some states do not allow the exclusion of consequential

or incidental damages, so the above exclusion may not

apply to you. This warranty provides you with specic

legal rights. You may have other rights, which vary, from

state to state.

VisionTek reserves the right to inspect and verify the

defectiveness of any products or portion of product

If you have any questions

about this product call

TOLL FREE Tech Support

866-VTEK411

returned. This warranty does not apply to any software

component.

EXCEPT AS EXPRESSLY STATED ABOVE, VISIONTEK

MAKES NO WARRANTY, EXPRESS OR IMPLIED,

WHETHER OF MERCHANTABILITY, NON-INFRINGE-

MENT OF INTELLECTUAL PROPERTY, FITNESS

FOR ANY PARTICULAR PURPOSE OR USE, OR

OTHERWISE ON THE PRODUCTS, OR ANY PARTS

OR TECHNICAL ASSISTANCE OR OTHER LABOR

FURNISHED.

VisionTek reserves the right to change the terms of this

warranty without notice.

Inhaltsverzeichnis

Andere VisionTek Tastatur Handbücher

VisionTek

VisionTek CandyBoard RF03 Bedienungsanleitung

Beliebte Tastatur Handbücher anderer Marken

Vortexgear

Vortexgear POK3R Bedienungsanleitung

Razer

Razer RZ03-0188 Bedienungsanleitung

Logitech

Logitech RUGGED LITE Bedienungsanleitung

Honeywell

Honeywell ADEMCO 5839 Montageanleitung

Hama

Hama AK-120 Bedienungsanleitung

Rodgers

Rodgers RK-76 Bedienungsanleitung

Logic Controls

Logic Controls KB5000 Series Bedienungsanleitung

Rapoo

Rapoo E9270P Bedienungsanleitung

iKey

iKey DP-88 Bedienungsanleitung

Logitech

Logitech G413 TKL SE Montageanleitung

Keychron

Keychron C1 Bedienungsanleitung

Dahua

Dahua NKB Bedienungsanleitung

Ultimate Technology

Ultimate Technology 500 POS Bedienungsanleitung

Ducky

Ducky Shine 5 Bedienungsanleitung

Mace

Mace MACALLY MERGOKEY Bedienungsanleitung

iKey

iKey KYB-42-KIOSK Bedienungsanleitung

Akko

Akko MX108 Bedienungsanleitung

Viper

Viper V770 Bedienungsanleitung