Vislink HEROCAST Bedienungsanleitung
Document No. RD001741 Rev14.
!
130-10479-000 REVC
!
!
!
User Manual
HEROCast™+ HEROCast BacPac™
VISLINK
Vislink House, 27 Maylands Avenue
Hemel Hempstead, Hertfordshire
HP2 7DE, England
US: +1 (888) 777 9221
UK:+44 (0) 1787 223300
Email: UKsupport@vislink.com
This document is supplied on the express terms that it is to be treated as confidential and that it may not be copied,
used or disclosed to others for any purpose except as authorized by Vislink.
GoPro, HERO, the GoPro logo, the GoPro Be a Hero logo, BacPac, Protune, SuperView, and Wear It. Mount It. Love
It. are trademarks or registered trademarks of GoPro, Inc. in the US and internationally. Other names and marks are
the property of their respective owners.
!
!
CONTENTS
1.!WEEE STATEMENT 1!
2.!OVERVIEW 2!
3.!SPECIFICATIONS 3!
3.1. COMPLIANCE STANDARDS 3!
3.2. VIDEO SPECIFICATIONS 3
3.3. RF SPECIFICATIONS 4!
4.!HEROCAST SETUP 5!
4.1. Parts and Illustration of HEROCast 5
4.2. Setting up HEROCast 5
4.3. Parts and illustration of HEROCast BacPac 7
4.4. Setting up HEROCast BacPac 7!
5.!CONFIGURATION 9!
5.1. Preparing the PC and Camera 9
5.2. Connecting HEROCast to the Computer 10
5.3. Configuring HEROCast using the HEROCast Application 11
5.4. Available Settings on the HEROCast Application 14!
6.!UPGRADING HEROCAST 15!
6.1. Setup 15
6.2. Tips for Upgrade Issues 17!
7.!Q&A 18!
!
!
!
!
1
1. WEEE STATEMENT
!
!
!
2
2. OVERVIEW
The HEROCast transmitter enables professional broadcasters to deliver engaging, live
content with immersive POV footage and unique perspectives that are synonymous with
GoPro. HEROCast integrates with GoPro cameras and its ecosystem of mounts, and
delivers the most versatile, mountable broadcast solution available. In addition, HEROCast
transmits high definition 1080/60fps and 720/60fps video using H.264 encoding with low
glass-to-glass latency.
Two options are available:
•HEROCast is available as an independent unit that can be connected to a GoPro
camera via a lockable HDMI cable, which is optimal for body mounting and
engaging POV shots.
•The HEROCast BacPac directly connects to the housing of a GoPro camera,
delivering an integrated, water-resistant solution for immersive live action footage.
Both configurations are compatible with HERO4 Black, HERO4 Silver, and
HERO3+ Black cameras.
The transmitters operate in the professional licensed frequency band of 1.95GHz –
2.7GHz, and require a matching RF diversity receive infrastructure.
The software provided on the USB drive included in the package contains all the software
required to enable operation. Once configured by the app, operation of the transmitter is as
basic as switching on HERO4.
For help or answers to questions not addressed in this manual, email
UKsupport@vislink.com or call Vislink:
•US: +1 (888) 777 9221
•UK:+44 (0) 1787 226227
!
!
3
3. SPECIFICATIONS
3.1. COMPLIANCE STANDARDS
This device is in compliance with the standards listed below:
•Europe (CE)!–!
o EN 302 064-2 V1.1.1!
o EN 301 489-1 V1.9.2!
o EN 301 489-28 V1.1.1!
o RoHS !
o WEEE!
•FCC
o FCC Part 74F!
o SAR!
o SAR Canada exempt.!
o Safety to EN60065:2014!
•Proposition 65 (California)!
3.2. VIDEO SPECIFICATIONS
•HDMI Type-D plug input
•H.264 low latency HD AVC video encoder/MPEG-4 Part 10 Video bit rates of 3.732
Mbps to 31.688 Mbps
•Audio encoding using MPEG-1 Layer 2
Supported Broadcast Standards
720P/50
720P/59.94
1080I/50
1080I/59.94
•Based upon the broadcast standard selected, there are several choices of modes on
the GoPro cameras which can be used to ensure video is available and is being
transmitted. A complete table of supported modes can be found in Section 7.
!
!
4
3.3. RF SPECIFICATIONS
Modulation Types
DVB-T
Modulation Modes
QPSK
16-QAM
64-QAM
OFDM Guard Interval
1/32
1/16
1/8
1/4
Modulation Forward error
Correction (FEC)
1/2
2/3
3/4
5/6
7/8
Modulation Polarity
Normal
Inverted
Modulation Bandwidth
6MHz
7MHz
8MHz
Transmitter Power
10mW
50mW
80mW
100mW
Carrier Frequency
1.95GHz – 2.70GHz
Video Standards
720P/50
720P/59.94
1080I/50
1080I/59.94
!
!
!
!
5
4. HEROCAST SETUP
4.1. Parts and Illustration of HEROCast
4.2. Setting Up HEROCast
A. Connect the antenna using the tools provided. Do not over tighten. The figure
below shows the antenna connector.
!
B. Attach the battery or the battery eliminator. If you are setting up HEROCast for the
first time, make sure that the battery is fully charged. If the battery is not charged,
use the battery eliminator for the setup. The battery eliminator and battery can be
swapped without reconfiguring the device.
Insert the hooked end of the battery into the HEROCast system first. Note the
notch where the hook at the end of the battery must be inserted. Insert the hook
and then press the battery connector firmly into the transmitter connector.
Swing the spring clip over the back of the battery.
!
!
!
!
6
C. Power on the camera.
D. Select a micro-HDMI cable of a suitable length from the set of cables provided in
the case. Attach one end of the cable to the HDMI connector (shown below).
Connect the other end to the camera.
Note: The camera must be powered on when connecting the HDMI cable.
E. When the camera is connected, two LEDs alternate between red and green, indicating that
the software is loading. As shown in the figure below, when HEROCast is transmitting, a
steady green LED is visible.
!
!
F. HEROCast has several configuration options allowing for precise specification of the
transmission protocols and video encoding. To configure HEROCast or to update the
firmware, refer to Section 5.
!
!
!
7
4.3. Parts and Illustration of HEROCast BacPac
4.4. Setting Up HEROCast BacPac
A. Connect the antenna using the tools provided. Do not over tighten. The figure
below shows the antenna connector with an antenna in place.
!
B. Attach the battery or the battery eliminator. If you are setting up HEROCast for the
first time, make sure that the battery is fully charged. If the battery is not charged,
use the battery eliminator for the setup. The battery eliminator and battery can be
swapped without reconfiguring the device.
As shown below, insert the hooked end of the battery into the HEROCast BacPac
first, then press the battery connector firmly into the transmitter connector.
!
!
!
8
C. Mount the camera to the HEROCast BacPac, so that the free end of the mini-
HDMI connector is clear of the frame and can be connected to the camera.
The figure below shows the correct positioning prior to pushing the camera in
place. Once the camera is in place, connect the HDMI connector to the camera.
!
D. When the camera is connected, two LEDs alternate between red and green, indicating that
the software is loading. When HEROCast is transmitting, a steady green LED is visible.
!
E. HEROCast BacPac has several configuration options allowing for precise specification of
the transmission protocols and video encoding. To configure HEROCast BacPac or to
update the firmware, refer to Section 5.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Vislink Sender Handbücher
Beliebte Sender Handbücher anderer Marken
Dejero
Dejero EnGo 3x Bedienungsanleitung
Rosemount
Rosemount 4600 Bedienungsanleitung
Speaka Professional
Speaka Professional 2342740 Bedienungsanleitung
trubomat
trubomat GAB 1000 Bedienungsanleitung
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Bedienungsanleitung
Rondish
Rondish UT-11 Bedienungsanleitung
