Vitek VTC-BHOCRAZE Bedienungsanleitung

VITEK

FEATURES:

• 1/3” Progressive Scan CMOS Sensor

• 2.1 MegaPixel With full 1080p/720p HD-SDI (SMPTE292M) / EX-SDI

Output

• Up to 30fps live view@ 1920x1080 (1080p)

• MegaPixel IR Corrected 3-9mm (VTC-BHOCRAZE39) / 9-22mm (VTC-

BHOCRAZE922) Motorized Auto Focus Zoom Lens

• True Day/Night with Dual Filter Switch

• 16:9 Video format

• On-board Intelligence (OBI Technology) delivers Auto-Focus-Zoom by

tracking motion, then optically zooming into that area of the frame

• Fully programmable advanced WDR

• 40 850nm IR LEDs with up to 150’ IR range

• Integrated Cooling Fan

• Advanced OSD Functions: Motion Activated Pointing Zoom, Defog, Smart

Dynamic IR, BLC/HLC, Motion Deblur, Pixel Defect Compensation, Title Set,

Mirror, Flip, Lens Refresh, Lens Initialize, Home Position, DSS, LED ON/OFF

control

• 100% Pure Digital Transmission of video data

• Extended Range Beyond 1000’ with RG59U 95% Copper Braid Coax

• Heavy Duty IP68 rated water/vandal resistant aluminum construction

• 12VDC / 24VAC Dual Voltage Operation

VTC-BHOCRAZE

2.1MP HD-SDI / EX-SDI

Vandal Resistant AFZ/WDR

IR Bullet Camera

2 3

Safety Precaution

CAUTION: TO REDUCE THE RISK OF ELECTICAL

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

To prevent electrical shock and risk of fire hazards, do not expose this unit

to rain or moisture and only use specified power source..

Warning :

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

their own expense.

Caution :

Any changes or modifications in construction of this device which are not expressly

approved by the party responsible for compliance could void the user's authority

to operate the equipment.

Main power quality should be that of a typical commercial environment. If the user

of the model requires continued operation during power interruptions, it is

recommended that the device be powered from an uninterruptible power supply

(UPS).

The symbol is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature

accompanying the unit.

The symbol is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electrical shock.

Safety Precaution

NOTICE

• The image used in this instruction manual are processed to help

comprehension and may differ from actual video of the camera.

• Avoid installing in areas where shock or vibration may occur.

• Pay attention to safety when running the connection cables and

make sure that the cables are not subject to heavy loads, kinks,

moisture or damage.

• Never open the device (no user serviceable parts inside). The

warranty becomes void if repairs are undertaken by

unauthorized persons.

• Maintenance and repair have to be carried out only by authorized

service centers.

• Use only a mild detergent to clean the housing.

• The camera should never be operated beyond the technical

specifications. This can lead to damaging the device and void

the warranty.

• The camera should never be operated in water.

4 5

Contents

p. 2~3

Safety Precaution

p. 4

Contents

p. 5~6

Features

p. 6

Package Includes

p. 7

Dimensions / Part Names

p. 8~10

Installation Instructions

p. 11~28

Operating Instructions

p. 29

Specifications

p. 30

On Cue VT-HDOCE Series

p. 31

Limited Product Warranty

Features

Key Features

• Full HD, 2.1 Mega Pixel, EX-SDI CAMERA, 1920x1080(30p/25p)

• Extended long reach HD Solution

• True WDR(Wide Dynamic Range)

• Improved Noise reduction with enhanced 3D-NR

• VTC-BHOCRAZE39: f=3~9mm, F1.2~F2.1 Day & Night Motorized Auto

Focus and Zoom lens (Optical 3x Auto focus zoom / Digital 32x zoom)

• VTC-BHOCRAZE922: f=9~22mm, F1.6~F2.3 Day & Night Motorized

Auto Focus and Zoom lens (Optical 2.4x Auto focus zoom / Digital 32x zoom)

• Dual ICR Switch

• Focusing Status Indicator on Screen

- ★(Blue) Focusing in process

- ★(White) Focusing Completed

• Various Zooming Technologies

- Smart Motion Zoom an Automatic zoom in/out when motion is detected

- Pointing Zoom which enables the zooming of any area within the FOV

- Preset Zoom, up to 4 presets

• Home Position setting

• Motion Detection, Privacy Mask, Defog, Sens-up(x32), BLC/HLC,

D-Zoom, H/V/HV Flip, Motion Deblur, Pixel Defect Compensation,

Lens Refresh, Lens Initialize

• ID / TITLE / ZOOM RATIO DISPLAY

• Enhanced Sensitivity by DSS technology

• EX-SDI or HD-SDI switchable

• Top performance at low light sensitivity (Sens-up On)

• OSD menu & Video sub-out for easy installation & maintenance.

• Circuit protection against faulty connection in power polarity

• Isolated power supply against ground loop problem

• Remote control via RS-485 (Pelco-D/P)

• Firmware update via RS-485

• Built-in 40 LEDs

• LED ON/OFF control

• Dual Window, One-touch 3-Axis locking bracket, Easy Installation Pad

• Built-in cooling Fan & Heating function

• 100% Pure Digital Transmission of video data

• Extended Range Beyond 1000’ with RG59U 95% Copper Braid Coax

• Heavy Duty IP68 rated water/vandal resistant aluminum construction

• 12VDC / 24VAC Dual Voltage Operation

6 7

Features

Package Includes

Mounting Template

General Operation

Instruction

Camera

General Description

• With ICR mechanism,

- Enhances its sensitivity about 10x at night time

- Can accept infrared light

• With 24VAC/12VDC dual power design,

- Offers the flexibility of installation

- Ensures the reliability

This camera realizes the natural and crisp image as you see the scene in front of

you by adopting Auto Focus Full HD(1920x1080p) camera module.

Torque Wrench:

3mm (1pc)

Video Sub-out

Cable (1pc)

Assembly Screw:

4 x 14mm (4pcs)

Mounting Screw:

4 x 30mm (4pcs)

Plastic Anchor:

6 x 30mm (4pcs)

Easy

Bracket

Cable Signal

Sticker Wiring Connector:

(1pc)

Part Names

Dimensions

(unit : inches)

LOCK/UNLOCK

SCREW

4.35

3.53

4.37

3.94

3.31

3.39

3.15

10.11

DUAL WINDOW

SUNSHIELD BOLT

SUNSHIELD

FRONT CASE

OSD Setup

CONTROL COVER

BRACKET

EASY

BRACKET

REAR CASE

POWER & VIDEO CABLE

8 9

Installation Instructions

Mounting Screw

: 4x30mm

Plastic Anchor

: 6x30mm

Torque Wrench

REAR VIEW

Cable exit

Assembly Screw

: 4x14mm

1. Place the mounting template at the installation position and drill the ceiling or

wall if needed. (*The easy bracket can not be installed on the ceiling)

2. Place the easy bracket on pre-drilled position and attach using mounting

screws(4x30mm). Skip this step when an easy bracket is not installed.

3. Route the power cable to the connecting place.

Hook up the camera bracket with the easy bracket as illustrated below.

4. Attach the camera bracket using the assembly screws (4x14mm).

Set the camera’s viewing angle.

5. Attach the sunshield to the camera unit and tighten the sunshield-bolt.

Installation Instructions

• Unlock the screw on the camera bracket through using the torque wrench supplied

• Set the camera’s viewing angle then lock the screw on the bracket.

Pan & Tilt adjustments

1) Pan limit:

Pan is limited to +/- 90°.

3) Inclination limit

(Horizontal image alignment): Inclination limited to +/-90° max.

2) Tilt limit:

Tilt is limited to 0°(2°) min ~ 90° max.

for wall (ceiling) installation respectively

with reference to the wall (ceiling) when

the inclination of camera module is 0°,

that is, the image is aligned horizontally.

■Adjustment of viewing angle

with one-touch 3-Axis bracket

Torque

wrench

Lock/Unlock

Screw

90° 90°

80°

90°

±90°

•on the wall

•on the ceiling

10 11

Installation Instructions

Power Supply Connections

l Make sure the power is removed before installation.

l Camera can work with either 24VAC or 12VDC, dual voltage power .

l Primary and secondary grounds are completely isolated to avoid possible

ground-loop problems

※ Attach the Signal Assignment Sticker

in a visible spot for wiring reference.

VIDEO (BNC)

AC24V/GND (Black wire)

AC24V/DC12V (Red wire)

RTX-/RS485 (Gray wire)

RTX+/RS485 (White wire)

In case that HD-SDI/EX-SDI Inputs are not supported by your monitor, please

use HD-SDI/EX-SDI Converter to connect HD-SDI/EX-SDI cable with Monitor

Inhaltsverzeichnis

Andere Vitek IP-Kamera Handbücher

Vitek

Vitek VTC-TNB5RFS/-2 Bedienungsanleitung

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

Vitek

Vitek Transcendent 5 Series Bedienungsanleitung

Vitek

Vitek VT-PIRC2T Bedienungsanleitung

Vitek

Vitek VTD-MS2810DN Bedienungsanleitung

Vitek

Vitek VTC-IR303-212NP Bedienungsanleitung

Vitek

Vitek VTD-TND30R3V Bedienungsanleitung

Vitek

Vitek VTC-C2NZ Bedienungsanleitung

Vitek

Vitek Transcendent VTC-TNB8RFA3-2 Bedienungsanleitung

Vitek

Vitek Transcendent Series Bedienungsanleitung

Vitek

Vitek Transcendent VT-TPTZ-B10X5N Bedienungsanleitung

Vitek

Vitek VTC-IRA24F Bedienungsanleitung

Vitek

Vitek VTC-TNB42R3F Bedienungsanleitung

Vitek

Vitek VTD-THD2RFE Bedienungsanleitung

Vitek

Vitek VTD-IR2811DN Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung

Digitus

Digitus DN-16085-1 Bedienungsanleitung