Vitek Premium TVI VTC-IRT30-2812 Bedienungsanleitung

FEATURES:

• Sony® 1/2.8” Progressive Scan CMOS Sensor

• 2.1 MegaPixel with Full 1080p/720p TVI Output

• MegaPixel IR Corrected 2.8-12mm Varifocal Auto Iris Lens with External

Adjustments for Focus and Zoom

• 30 Dynamic Infrared LEDs at 850nm enable viewing in total darkness up to

100 feet

• Dual Glass Compartments to Eliminate IR Reflection

• Smart Motion Zoom tracks motion, then intelligently zooms into that area of

the frame

• 3D-DNR Digital Noise Reduction

• CVBS Output by BNC

• True Day/Night by ICR - Dual Filter Switch

• Fully programmable True WDR (Dual Scan)

• Secondary Video Output & OSD Control Joystick are accessible inside a

gasket sealed removable side panel

• Advanced OSD Functions: NORMAL, WDR, D-WDR, 3DNR, Dynamic IR,

Motion Detection, Privacy Mask, D-Zoom(~8x), Sens-up(x32), Flickerless,

BLC/HLC, Defog, Pixel Defect Compensation, Title Set, LSC, Deblur

• 3-Axis mount with Simple One Turn Positioning Lock for Ease of Installation

• IP-67 Rated Water Resistance

• 12VDC / 24VAC Dual Voltage Operation

VTC-IRT30-2812

2.1MP Smart TVI WDR Bullet

Camera with 30 IR LEDs

VITEK

Safety Precaution

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To prevent electric shocks and risk of fire hazards, do NOT use other than

specific power source.

Warning :

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

Caution :

Any changes or modifications in construction of this device which are not expressly

approved by the party responsible for compliance could void the user's authority

to operate the equipment.

Mains power quality should be that of a typical commercial environment. If the user

of the model requires continued operation during power mains interruptions, it is

recommended that the model be powered from an uninterruptible power supply

(UPS) or a battery.

The symbol is intended to alert the user to the presence of important

operating and maintenance(servicing) instructions in the literature

accompanying the unit.

The symbol is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

2 3

Safety Precaution

NOTICE

The image used in this instruction manual are processed to help comprehension

and may differ from actual video of the camera.

Avoid installing areas where has shock or vibration which results in the problems.

Pay attention to safety when laying the connection cable and observe that the cable

is not subjected to heavy loads, kinks or damage and no moisture can get in.

Never open the device such as boards or lens.

The warranty becomes void if repairs are undertaken by unauthorized persons.

Maintenance and repair have to be carried out only by authorized service centers.

Use only a mild detergent to clean the housing.

The camera should never be operated beyond the technical specifications.

This can lead to destruction.

The camera should never be operated in water.

Contents

Safety Precaution

p.02~03

Contents

p.04

Features

p.05~06

Composition

p.06

Dimensions

p.07

Part Names

p.08

Installation Instructions

p.09~11

Operating Instructions

p.12~26

Specifications

p.27

4 5

Features

Key Features

• Full HD, 2Mega Pixel HD-TVI CAMERA, 1920x1080(30p)

• TVI Video Transmission Distance over Coax.; 500M (RG59, 75Ω)

*depending on cable condition and characteristics

• Automatically removable IR Cut filter by Dual filter switcher

• Built-in f=2.8~12mm F1.4 Mega pixel DC Auto Iris Vari-focal lens

• True WDR(Wide Dynamic Range)

• Improved Noise reduction with the enhanced 3D-NR

• Pointing Zoom which enables flexible zooming of any area.

• Smart Motion Zoom in combining with Pointing Zoom.

(Automatic zoom in/out when motion is detected)

• Motion Detection, Privacy Mask, Defog, Sens-up(x32), D-WDR,

H/V/HV Flip, D-Zoom(1.1x~8x), LSC(Lens Shade Compensation),

BLC/HLC, Pixel Defect Compensation, Title Set

• Top performance at low light sensitivity (Sens-up On)

• Video output HD-TVI or CVBS switchable

• OSD MENU & Video Sub-out port for easy installation & maintenance

• Reverse polarity protection circuit

• Isolated power supply against ground loop problem

• UTC Control through HD-TVI DVR.

• External Zoom & Focus adjustment

• Built-in 30pcs IR-LEDs

• Dual Window

• One-touch 3-Axis locking bracket

• IP67 protection

• AC24/DC12V Dual power

General Description

This camera realizes the natural and crisp image as you see the scene in front

of you by Full HD(1920x1080p) camera module.

Composition

Features

Torque Wrench:

3mm (1pc)

Video Sub-out

Cable (1pc)

Cable Signal

Sticker

Wiring Connector:

(1pc)

Mounting Screw:

4 x 40mm (3pcs)

Plastic Anchor:

6 x 30mm (3pcs)

Mounting

Template

Operating

Instruction

Camera

• ICR mechanism:

- Enhances its sensitivity about 10x at night time

- Can accept infrared light

• Intelligent Focus Indicator and FOCUS ASSIST menu:

- Offers easy adjustment of Focus

• 24VAC/12VDC dual power design:

- Offers flexibility of installation

- Ensures the reliability

6 7

Dimensions

• Extreme care should be taken NOT to scratch the window in front of lens.

• Care should be taken that the cable is NOT damaged, kinked or exposed in

a hazardous area.

• Do not point the camera lens directly at the sun or a spot light.

CAUTION

3.43”

3.73”

3.17”

9.29”

9.72”

Ø3.64”

Part Names

DUAL WINDOW

POWER

CABLE

SUNSHIELD BOLT

BOTTOM

VIEW

SUNSHIELD

FRONT CASE

OSD Setup

CONTROL COVER

BRACKET

REAR CASE

FOCUS ZOOM

8 9

Installation Instructions

Mounting Screw

: 4x40mm

1. Place the mounting template at the installation position and drill the ceiling

or wall if needed.

2. Route the Power cable to the connecting place.

3. Place the camera bracket on pre-drilled position and attach it using mounting

screws (4x40mm).

4. Set the camera’s viewing angle and adjust zoom/focus of lens by using the L-wrench.

5. Install the sunshield onto the camera unit and tighten the sunshield-bolt.

■Adjustment of viewing angle

with one-touch 3-Axis bracket

Torque

wrench

Lock/Unlock

Screw

Installation Instructions

Pan & Tilt adjustments

Zoom & Focus adjustments

1) Pan limit:

Pan is limited to +/- 90°.

3) Inclination limit

(Horizontal image alignment):

Inclination limited to +/-90° max.

2) Tilt limit:

Tilt is limited to 0°(2°) min ~ 90° max.

for wall(ceiling) installation respectively with

reference to the wall(ceiling) when the

inclination of camera module is 0°, that is,

the image is aligned horizontally.

90° 90°

• Turn the Focus gear to “N”(Near) or “∞”(Far)

until the sharpest focus is made.

• To widen the viewing angle, turn the Zoom

to “W”(Wide) and to obtain a closer view,

turn it to “T”(Tele)

Use the torque wrench supplied.

• Unlock the screw on the camera bracket through using the torque wrench

supplied

• Set the camera’s viewing angle then lock the screw on the bracket.

90°

±90°

•on the wall •on the ceiling

10 11

Inhaltsverzeichnis

Andere Vitek Sicherheitskamera Handbücher

Vitek

Vitek Mighty VTD-MVP2810WDR Bedienungsanleitung

Vitek

Vitek Transcendent 3 Series Bedienungsanleitung

Vitek

Vitek VTD-C14 Bedienungsanleitung

Vitek

Vitek Alpha Series Bedienungsanleitung

Vitek

Vitek VTD-A4F/VW Bedienungsanleitung

Vitek

Vitek VTC-LED307BB Bedienungsanleitung

Vitek

Vitek Transcendent Series Bedienungsanleitung

Vitek

Vitek VTC-TNB4RMA4 Bedienungsanleitung

Vitek

Vitek TRANSCENDENT VTD-TND3RVEB Bedienungsanleitung

Vitek

Vitek TRANSCENDENT VTD-T4D6HR8MD Bedienungsanleitung

Vitek

Vitek VTC-IRLED30HD Bedienungsanleitung

Vitek

Vitek VTC-C2BMS2 Bedienungsanleitung

Vitek

Vitek VTC-HD713A Bedienungsanleitung

Vitek

Vitek VTC-C574 Bedienungsanleitung

Vitek

Vitek VTC-TNT5RFE-2 Bedienungsanleitung

Vitek

Vitek Mighty DomeColor Dome Camera Series Bedienungsanleitung

Vitek

Vitek VTC-TNT4RMAD Bedienungsanleitung

Vitek

Vitek VTC-TNT4RMA4 Bedienungsanleitung

Vitek

Vitek VTC-IRLED30A Bedienungsanleitung

Vitek

Vitek VTD-MVHD2812 Bedienungsanleitung

Vitek

Vitek VTC-TNT5RMEA Bedienungsanleitung

Vitek

Vitek VT-PTZ220NP Bedienungsanleitung

Vitek

Vitek Transcendent VTC-THB5RM Bedienungsanleitung

Vitek

Vitek VTC-IRLED24A Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung

Security Cameras Direct

Security Cameras Direct CFC6042IR Bedienungsanleitung