Vitek Virtuoso VTC-IR303FNP Bedienungsanleitung

FEATURES:

• 1/2.8” Sony® 3.23 MegaPixel RGB Bayer Array CMOS Sensor

• Up to 30fps live view @ 2048 x 1536 (3.15 MegaPixel)

• MegaPixel IR Corrected 3.6mm Fixed Iris Lens

• 30 Dynamic Infrared LEDs at 850nm enable viewing in total darkness up to

100 feet

• Dual Glass Compartments to Eliminate IR Reflection

• XD-DNR (2D-DNR + 3D-DNR) Noise Reduction

• True Day/Night by ICR - Dual Filter Switch

• Triple Streaming (H.264/MJPEG) offering Extensive Integration Possibilities

• Real-time Lens Distortion Correction (LDC) for an optically correct picture

• Compliance with the latest Onvif Profile S

• On-board network security with IP address filtering

• Advanced OSD Features including Image Stabilization & Corridor Mode

• MicroSD memory card slot for Local recording supporting up to 128GB

MicroSDXC cards

• IP-66 Rated Water Resistance

• 12VDC and PoE (Power over Ethernet) Operation

VTC-IR303FNP

Virtuoso Series 3.23MP WDR

IP Camera with 30 IR LEDs

QUICK START GUIDE

PLEASE NOTE:

Complete user guide available online. Scan the QR Code or visit:

http://www.vitekcctv.com/Manuals/Virtuoso-IP_Operation-Manual.pdf

VITEK

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To prevent electric shocks and risk of fire hazards, do NOT use other than

specific power source.

Warning :

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

Caution :

Any changes or modifications in construction of this device which are not expressly

approved by the party responsible for compliance could void the user's authority

to operate the equipment.

Mains power quality should be that of a typical commercial environment. If the user

of the model requires continued operation during power mains interruptions, it is

recommended that the model be powered from an uninterruptible power supply

(UPS) or a battery.

The symbol is intended to alert the user to the presence of important

operating and maintenance(servicing) instructions in the literature

accompanying the unit.

The symbol is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

Safety Precaution

2 3

Quick Start

Guide

Composition

Dimensions

(unit : mm)

Installation CD

Hex L-Wrench:

3 mm (1pc)

Mounting Screw:

4 x 30mm (3pcs)

Plastic Anchor:

6 x 30mm (3pcs)

Camera

Mounting

Template

9.25”

Ø2.76”

2.99”

3.15”

Ø2.64”

Coupler for

RJ45 Cable (1pc)

Part Names

SUNSHIELD BOLT

SUNSHIELD

DUAL WINDOW

POWER

CABLE

FRONT CASE

BRACKET

REAR CASE

RUBBER SEALING

Micro

SD Card Slot

Reset Button

4 5

Installation Instructions

Mounting Screw

: 4x30mm

L-Wrench

1. Attach the mounting template at the installation site and drill three holes

for mounting on the ceiling or wall.

2. Route the power cable to the connecting place and place the bracket on the

pre-drilled position.

3. Attach the camera bracket using mounting screws.

4. Adjust the camera’s viewing angle by using the L-Wrench supplied. (Refer to ‘TIP’ )

5. Put the sunshield onto the camera unit and tighten the sunshield-bolts.

Plastic Anchor

: 6x30mm

• Before installation, adjust the ‘Tilt’

and ‘Rotation’ angle.

[ TIP ]

• Before installation, adjust the ‘Pan’ angle.

[ TIP ]

Installation Instructions

• When reattaching the front lens cover make sure that the rubber gasket is

properly seated. Do not over tighten lens cover

CAUTION

• Extreme care should be taken NOT to scratch the window in front of lens.

• Care should be taken that the cable is NOT damaged, kinked or exposed in

a hazardous area.

• Do not point the camera lens directly at a strong light source such as the sun or

spot light.

Pan & Tilt Adjustment

3) Inclination: Adjusts

horizontal image

alignment.

2) Tilt: Adjusts view angle

1) Pan: Adjusts view direction

Loosen screws at the side of the bracket as illustrated below to adjust all three

axes at once. L-Wrench

Installation and commissioning Instructions

• Make sure power is removed before the installation.

• After all connections are properly finished, follow this order for applying power.

a) Plug the network cable into RJ-45 Ethernet Port.

If PoE is the unique power, there will be no need to connect Power terminal.

b) When 12VDC Local power is necessary, connect power cables

first, then plug the AC adapter into AC outlet to avoid damage.

Power Supply Connections

Camera can work with either 12VDC or PoE(IEEE Std. 802.3af).

Primary and secondary grounds are completely isolated to avoid possible

ground loop problems.

► When PoE and Local DC power are connected at the same time,

Local power has priority.

6 7

Virtuoso Quick Start Guide

1. Operating System

• Windows Vista (32 bit) Ultimate, Business Edition

• Windows 7, 8, 10 (32/64 bit) Ultimate, Professional Edition

2. Processor

• Intel Core 2 Duo 2.4 GHz or higher (for using 1920*1080 30 fps)

• Intel Core i7 2.8 GHz or higher (for using 2048*1536 30fps)

3. Memory

• 2 GB or more

4. Resolution

• 1280X1024 pixels or higher (32 bit color)

5. Web Browser

• Microsoft Internet Explorer Ver. 9.0, 10.0 or Higher

• Safari Ver. 4.0 (Plug-in free viewer only)

• Google Chrome Ver. 4.0 (Plug-in free viewer only)

1. PC Requirements

1. Open IP MANAGER

2. Highlight the camera and right click

3. Click the “Change IP” button.

4. Input IP Address and Subnet, Gateway and click the button “OK”.

2. IP Manager

The IP Manager can be installed by locating the program on the enclosed CD or

visiting: www.vitekcctv.com/support/downloads

Virtuoso Quick Start Guide

1. Open Web browser

2. Type IP address

• Enter the camera’s IP address in

Internet Explorer® address bar.

• The default IP address is 192.168.0.10

• The default User ID and Password is

admin / admin

3. Accessing the IP Camera

4. Live View Page

The network camera’s Live View page appears in your browser after successful login.

ICONS:

Live: Displays live video.

Setup: Enters setup menu.

Exit: Exit current login and/or Enter new login.

Snapshot: Take a picture of the video image currently on display. Supports

original image size, view, print, and save feature.

Zoom: Supports a digital zoom in live video image.

Full screen: Expand the current windows into maximum monitor size.

Information: Shows the current major setting status.

LEFT COLUMN SETTINGS:

Stream: Specify the viewable video stream source to display in live view page.

Screen Ratio: Specify the viewable video size to display in live view page.

Event Action: Used to start or stop an event manually according to event

8 9

Virtuoso Quick Start Guide

The Information shows the camera basic information such as Model name, MAC

address, IP address, Zeroconf IP address and Firmware version.

5. Quick Setup Menu

5-1. Information

5-2. Users

5-2-1. Add

User accounts can be added or modified or removed. The authority depends upon user

group automatically and shows the permission status to access the menus.

Click the Add, Edit, or Delete button for managing user account.

• Name: Shows the name registered name to access the camera.

• Group: Shows the assigned permission given to users.

• Authority: Shows the permission status to access the menus.

To add a new user:

1. Click the Add tab, and type a new user name. (1 to 14 alphanumeric characters).

• User names are not case sensitive.

2. Type a password and retype confirm password. (1 to 8 alphanumeric characters).

• Passwords are case sensitive.

3. Select one of the groups you wish to assign to the user.

4. Click the OK button to save the settings and add a new user

Enter the setup menu icon on the Web Viewer.

Setting the Quick setup menu.

Virtuoso Quick Start Guide

5-3. Network

IP Address:

The DHCP (Dynamic Host Configuration Protocol) server has a feature that

automatically assigns an IP address to the device if there is a device on the

network.

5-2-3. Delete

To delete a user:

1. Select one of the User Names in the User List you want to remove.

2. Click the Delete tab. A dialog box appears with confirmation message.

3. Click the OK button. The user profile is removed from the User List profile.

5-2-2. Edit

To edit a user:

1. Select one of the User Names in the User List you want to modify.

2. Click the Edit tab, then new pop-up window appears.

3. Type a password (1 to 8 alphanumeric characters) and retype confirm password.

• The user name can’t be modified.

4. Select one of the groups you wish to assign to the user.

5. Click the OK button to save the settings and modify a user.

10 11

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Vitek Sicherheitskamera Handbücher

Vitek

Vitek VTC-IRLED24H Bedienungsanleitung

Vitek

Vitek VTC-T4T3HR2MD Bedienungsanleitung

Vitek

Vitek VTD-A4F/IW Bedienungsanleitung

Vitek

Vitek VT-PIRC1 Bedienungsanleitung

Vitek

Vitek Alpha VTD-A4F/I Bedienungsanleitung

Vitek

Vitek VT-IR1C/12 Bedienungsanleitung

Vitek

Vitek VTC-IR1600/550 Bedienungsanleitung

Vitek

Vitek VT-TPTZ25HRAN-4PNS Bedienungsanleitung

Vitek

Vitek TRANSCENDENT VTC-THT10R2F Bedienungsanleitung

Vitek

Vitek VTC-TNB8RMA4B Bedienungsanleitung

Vitek

Vitek VTC-EB15B Bedienungsanleitung

Vitek

Vitek TRANSCENDENT VTD-T4D6HR8MD Bedienungsanleitung

Vitek

Vitek VTC-TNT30R3F Bedienungsanleitung

Vitek

Vitek Transcendent VTC-TNT8RFEA-2 Bedienungsanleitung

Vitek

Vitek VT-PTZ10 Bedienungsanleitung

Vitek

Vitek VT-TPTZ10HR-2A4 Bedienungsanleitung

Vitek

Vitek VTD-MH2910 Bedienungsanleitung

Vitek

Vitek VTC-TTB42R2F Bedienungsanleitung

Vitek

Vitek Transcendent VT-TPTZ-B10X5N Bedienungsanleitung

Vitek

Vitek VTD-A4F/IB Bedienungsanleitung

Vitek

Vitek VTC-PIR4CN-4 Bedienungsanleitung

Vitek

Vitek VTD-MVH2910 Bedienungsanleitung

Vitek

Vitek VTD-VS48 Bedienungsanleitung

Vitek

Vitek VIRTUOSO Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung