Vitek VTC-C2BAZE Bedienungsanleitung
VITEK
VITEK
FEATURES
• 1/3” 2.1 MegaPixel Progressive Scan CMOS
• 2.1 MegaPixel With full 1080p/720p Output
• Up to 30fps live view @ 1920x1080 (1080p)
• MegaPixel IR Corrected 3-9mm (VTC-C2BAZE39) / 9-22mm (VTC-
C2BAZE922) Motorized Auto Focus and Zoom
• Extended long reach HD Solution
• Mechanical IR Cut Filter (True Day/Night)
• 16:9 Video format
• On-board Intelligence (OBI Technology) delivers Auto-Focus-Zoom by
tracking motion, then optically zooming in to that area of the frame
• Fully programmable advanced WDR
• Advanced OSD Functions: Motion Activated Pointing Zoom, Defog, Smart
Dynamic IR, BLC/HLC, Motion Deblur, Pixel Defect Compensation, Title Set,
Mirror, Flip, Lens Refresh, Lens Initialize, Home Position, DSS
• Up to 1000’ HD Transmission Range (Depending on cable characteristics and
integrity)
• 12VDC / 24VAC Dual Voltage Operation
VTC-C2BAZE
2.1MP HD-SDI / EX-SDI
Auto-Focus-Zoom Camera
2 3
Safety Precaution
CAUTION: TO REDUCE THE RISK OF ELECTICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
To prevent electrical shock and risk of fire hazards, do not expose this unit
to rain or moisture and only use specified power source..
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Main power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power interruptions, it is
recommended that the device be powered from an uninterruptible power supply
(UPS).
The symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock.
3
Safety Precaution
NOTICE
• The image used in this instruction manual are processed to help
comprehension and may differ from actual video of the camera.
• Avoid installing in areas where shock or vibration may occur.
• Pay attention to safety when running the connection cables and
make sure that the cables are not subject to heavy loads, kinks,
moisture or damage.
• Never open the device (no user serviceable parts inside). The
warranty becomes void if repairs are undertaken by
unauthorized persons.
• Maintenance and repair have to be carried out only by authorized
service centers.
• Use only a mild detergent to clean the housing.
• The camera should never be operated beyond the technical
specifications. This can lead to damaging the device and void
the warranty.
• The camera should never be operated in water.
4 5
Contents
Safety Precaution
p.02~03
Contents
p.04
Features
Package Includes
p.05~06
Dimensions
p.07
Part Names
p.08
Installation Instructions
p.09
Operating Instructions
p.10~26
Specifications
p.27
OnCue VT-HDOCE Series
p.28
Limited Product Warranty
p.29
5
Features
Key Features
• Full HD, 2Mega Pixel, EX-SDI CAMERA, 1920x1080(30p/25p)
• Extended long reach HD Solution
• Real time True WDR (Wide Dynamic Range) / 30fps
• Improved noise reduction with the enhanced 3DNR
• VTC-C2BAZE39: f=3~9mm, F1.2~F2.1 Day & Night Motorized Auto
Focus and Zoom lens (Optical 3x / Digital 32x)
• VTC-C2BAZE922: f=9~22mm, F1.6~F2.3 Day & Night Motorized Auto
Focus and Zoom lens (Optical 2.4x / Digital 32x)
• Dual ICR Switch
• Focusing Status Indicator on Screen
- ★(Blue) Focusing in process
- ★(White) Focusing Completed
• Various Zooming Technologies
- Smart Motion Zoom (Automatic zoom in/out when motion is detected)
- Pointing Zoom which enables the zooming of any area within the FOV
- Preset Zoom up to 4 presets
• Home Position setting
• Motion Detection, Privacy Mask, Defog, Sens-up(x32), BLC/HLC,
D-Zoom, H/V/HV Flip, Motion Deblur, Pixel Defect Compensation,
Lens Refresh, Lens Initialize
• ID / TITLE / ZOOM RATIO DISPLAY
• Enhanced Sensitivity by DSS technology
• EX-SDI or HD-SDI switchable
• Top performance at low light sensitivity (Sens-up On)
• OSD menu & Video sub-out for easy installation & maintenance
• Circuit protection against faulty connection in power polarity
• Isolated power supply against ground loop problem
• Remote control via RS-485 (Pelco-D/P)
• Firmware update via RS-485
• Anti-Scratch hard coated Window
6 7
General Description
• With ICR mechanism,
- Enhances its sensitivity about 10x at night time
- Can accept infrared light
• With 24VAC/12VDC dual power design,
- Offers the flexibility of installation
- Ensures the reliability
This camera realizes the natural and crisp image as you see the scene in front of
you by adopting Auto Focus Full HD(1920x1080p) camera module.
Features
Package Includes
Zoom Box Camera Operating Instruction
7
Dimensions
(unit : mm)
• Extreme care should be taken NOT to scratch the window on front of lens.
• Care should be taken that the cable is NOT damaged, kinked or exposed in
a hazardous area.
• Do not point the camera lens directly at the sun or a spot light.
CAUTION
4.45
Ø2.13
4.92
2.83
2.99
8 9
Part Names
Front Case
Window
Rear Case
Mount Holes
(Top / Bottom)
REAR VIEW
① OSD Control Joy stick
② Power input terminal
(24VAC/12VDC)
③ RS-485 / IR connector
④HD-SDI/EX-SDI output connector
⑤ Power LED
⑥ CVBS output connector
⑦ Video format Switch
④
③
①
⑤
⑦
⑥
②
9
Installation Instructions
• The camera has a 1/4” thread insert on top and bottom for mounting
the camera to a wall or ceiling with a corresponding mount.
Installation and commissioning Instructions
• Make sure the power is removed before installation.
• After all connections are properly finished, follow this order for applying power.
first connect the low voltage wires to the camera, then plug the AC/DC adapter
to AC outlet to avoid damage..
Power Supply Connection
Camera can work with either 24VAC or 12VDC, dual voltage power.
Primary and secondary grounds are completely isolated to avoid possible
ground-loop problems.
10 11
Operating Instructions
Using OSD Controller
Setup menu can be accessed and controlled by OSD control joy stick on the rear
of the camera unit.
Five commands are available with the joy stick.
The design of OSD could be different according to the Model.
Description of the joystick operation
1) SET Key (●) : Access to the menu or enter the setting.
To enter the main menu, press the Set Key down for about 1.5 seconds.
2) UP/DOWN Key (▲/▼) : Choose the desired sub-menu and to move
the cursor up or down.
3) LEFT/RIGHT Key (◄/►) : Set up the value of the selected menu.
Used to adjust the desired menu selection and to move the cursor left
or right.
4) denotes a long press down for about 2 seconds
Description of the ZOOM & FOCUS* adjustment
1) ▲ : Zoom In
2) ▼ : Zoom Out
3) ◄ : Focus Near
4) ► : Focus Far
(*) Works only when OSD Menu is inactive.
Inhaltsverzeichnis
Andere Vitek Sicherheitskamera Handbücher
Vitek
Vitek VT-PTZ12W Handbuch
Vitek
Vitek VTC-IRLED24H Bedienungsanleitung
Vitek
Vitek VTC-T4B4HR5MD Bedienungsanleitung
Vitek
Vitek VT-PTZ40WH Bedienungsanleitung
Vitek
Vitek VTC-BHOCCR212M Bedienungsanleitung
Vitek
Vitek VTC-TNT4RMS Bedienungsanleitung
Vitek
Vitek Transcendent VTC-TNB4RFA3 Bedienungsanleitung
Vitek
Vitek VT-IRBD1 Bedienungsanleitung
Vitek
Vitek VTC-THB5R3 Bedienungsanleitung
Vitek
Vitek VTD-TND4RFA4 Bedienungsanleitung
Vitek
Vitek Transcendent VTD-TND4RMA3B Bedienungsanleitung
Vitek
Vitek VTC-C54 Bedienungsanleitung
Vitek
Vitek VTD-B72 Bedienungsanleitung
Vitek
Vitek Transcendent VTC-TNT3RFE Bedienungsanleitung
Vitek
Vitek VTC-HOCRBD4F Bedienungsanleitung
Vitek
Vitek VTC-IRV30/2810 Bedienungsanleitung
Vitek
Vitek VT-SMKC1 - DATASHEET 2 Bedienungsanleitung
Vitek
Vitek VTC-C661 Bedienungsanleitung
Vitek
Vitek VTC-TNB4RFS Bedienungsanleitung
Vitek
Vitek VTC-TNT4FL-2 Bedienungsanleitung
