VITRONIC STAR UI Handbuch
IP Camera Setting Manual
Star Light Series
Firmware Version V2.6
Thanks for purchasing our product. Before operating the unit, please read the
instructions carefully and keep this manual for future reference.
The information in this manual was current when published. The manufacturer
reserves the right to revise and improve its products. All specifications are therefore
subject to change without prior notice.
Table of Contents
1. INSTALLATION...................................................................................................................................................................... 1
1.1 INSTALLATION FLOW CHART ............................................................................................................................................... 1
1.2 DIRECT LINK...................................................................................................................................................................... 2
1.3 LINK VIA HUB /POEHUB.................................................................................................................................................... 2
2. USER INTERFACE ................................................................................................................................................................ 3
2.1 LOGIN ............................................................................................................................................................................... 3
2.2 INTERFACE OVERVIEW ....................................................................................................................................................... 4
1. Live View ............................................................................................................................................... 5
2. Video ..................................................................................................................................................... 6
3. Image .................................................................................................................................................... 8
4. Audio ..................................................................................................................................................... 9
5. DateTime ............................................................................................................................................. 10
6. Network ................................................................................................................................................11
7. Alarm................................................................................................................................................... 13
8. Face Detection ..................................................................................................................................... 14
9. Storage................................................................................................................................................ 16
10. Maintain ............................................................................................................................................... 17
11. PTZ/OSD ............................................................................................................................................. 18
130820-STAR UI-V2.6-V1
1
1. Installation
1.1 Installation Flow Chart
Default Settings of IP CAM
IP Address : 192.168.1.168
User Name : admin
Password : 9999
Suggested IP Address For PC/NB
IP Address : 192.168.1.200
Subnet Mask : 255.255.255.0
Gateway : 192.168.1.1
NOTE:
Use PoE device for power supply is only available to cameras with PoE function. Cameras without PoE
function need to be connected directly to the power supply.
Power Type
DC
Check the power of PoE Plug the Power Adapter
Connect the RJ-45 LAN cable to the IP CAM
PoE
IP setting for PC/NB
(Please see the suggested IP address)
Disable the anti-virus software and firewall
Turn on the PC/NB and log-in Windows OS
Run IE browser (IE 8.0 or above)
Type the URL http://192.168.1.168
and get into IP CAM setting window
FI NISH
Get into the IP CAM setting window
User Name: admin / Password: 9999
Make sure PC installed with JAVA Version 6
Update 27 or above when installing IP CAM for the
first time
START
130820-STAR UI-V2.6-V1
2
1.2 Direct Link
Make sure PC installed with JAVA Version 6 Update 27 or above
(1) Plug the power adapter to IP CAM.
(2) Run the IE browser with http://192.168.1.168
(3) When the log-in window pop-up, please input the User Name and Password.
(4) Whenever the connection is ready, the main page (setting window) of IP CAM will show
on.
1.3 Link via Hub / PoE Hub
(“Link via PoE Hub” applied only to models with PoE function)
Make sure PC installed with JAVA Version 6 Update 27 or above
(1) Run the IE browser with http://192.168.1.168
(2) When the log-in window pop-up, please input the User Name and Password.
(3) Whenever the connection is ready, the main page (setting window) of IP CAM will show
on.
Adapter
Cat-5 LAN cable
PoE / Hub
Cat-5 LAN cable Cat-5 LAN cable
130820-STAR UI-V2.6-V1
3
2. USER INTERFACE
2.1 Login
1. Start the browser, and input http://192.168.1.168/ in the address field, then press Enter.
NOTE:
It is strongly suggested that the user browse with Internet Explorer. Browsers other than
Internet Explorer are NOT fully supported when the manual published, hence, the
manufacturer WILL NOT BE LIABLE FOR ANY LOSS OR DAMAGE CAUSED.
2. Enter User Name and Password In the prompt window, and click OK.
The default User Name and Password is admin and 9999. You will need to enter the account and password
every time whenever you restart the application or reconnect.
130820-STAR UI-V2.6-V1
4
2.2 Interface Overview
After login to the system, the screen will be displayed as below:
On the left side are the buttons of the function pages. The functions each page performs are listed
in the table below. More information will be given in the following sections. Whenever the
adjustment completed, click Submit to save the settings.
Note：
The content of the function pages may vary by model.
Live View
Video
Image
Audio
DateTime
Network
Alarm
Storage
Maintain
PTZ/OSD
130820-STAR UI-V2.6-V1
5
1. Live View
Main page. Display the image captured by the camera.
Language:
English / 日本语 / 繁中 / 简体中文 / Россия / Magyar / Deutsch /
اناﺮﻳ / España / Polska / Nederlands / Portuguese / Francais
(Language options may vary by region)
Full Screen Zoom in
Snapshot Zoom out
Record & Save Restore
Stop Recording Information
Motion Detect
Audio On
Audio Off
Face Detect
PTZ Control (Applied only to models with PTZ function):
Stop (center button) / 8-direction Keys (outer buttons)
Zoom Out Zoom In
Wide Tele
130820-STAR UI-V2.6-V1
6
2. Video
Modify the settings of IP video settings, stream type and local display.
Shutter / Quality / IRIS
Shutter Speed (Min)(Second)
1/2, 1/4, 1/8, 1/15, 1/25(PAL), 1/30(NTSC), 1/50(PAL),
1/60(NTSC), 1/100(PAL), 1/120(NTSC), 1/250, 1/500, 1/750,
1/1,000, 1/1,500, 1/2,000, 1/10,000, 1/100,000 sec.
Shutter Speed (Max)(Second) 1/30, 1/60, 1/120, 1/250, 1/500, 1/750, 1/1000, 1/1500,
1/2000, 1/10000, 1/100000
Shutter Speed (Level) 0~7
Quality (Level) 0~7
Auto IRIS Manual / Auto
FLC / WB / BLC
Flicker Control 60hz NTSC / 50hz PAL
White Balance AUTO_WIDE / AUTO_NORMAL / SUNNY / SHADOW /
INDOOR / LAMP / FL1 / FL2
Back Light Compensation Off / On
Back Light Level Min / Mid / Max
WDR / IR-Cut
WDR Enhancement Off / On
WDR Level 0~7
IR-Cut Setting Auto / BW / Color / External
DNR OFF / 2D DNR / 3D DNR
Sensor Mode LINEAR / WDR
With WDR mode, Shutter Speed Max can only set to 1/250.
130820-STAR UI-V2.6-V1
7
Stream Type
Video Streams Single / Dual / Tri-stream
Face Detection is only available with Single video streams.
Codec Profiles H.264 / MPEG4 / MegaPixel JPEG
Resolution H.264: 720P(1M), H.264: D1, H.264: SXGA(1.3M),
H.264:1080P(2M), H.264: 3M
Stream1 M-JPEG
Frame rate 1 / 3 / 5 / 10 / 15 / 20 / 25 / 30 fps
Quality 25 / 50 / 75
(NOTE: The content may vary by model)
130820-STAR UI-V2.6-V1
8
3. Image
Modify the settings of image, OSD and advanced image settings.
Image
Brightness 0 ~ 255 (Default 128)
Contrast 0 ~ 255 (Default 128)
Saturation 0 ~ 255 (Default 128)
Sharpness 0 ~ 255 (Default 128)
DeNoise 0 ~ 255 (Default 128)
EV Compensation 0 ~ 255 (Default 128)
GrayScale 0 ~ 255 (Default 128)
Default Restore to the default values
ReLoad Load the previous values
Stream1 / Stream2 / Stream3 OSD
Mode Date / Time / Text
Text Position Top-Left / Top-Right
Local Display
Date Position Bottom-Right / Bottom-Left
Time Position Bottom-Right / Bottom-Left
Local Display OFF / NTSC / PAL
Rotation OFF / HORIZONTAL / VERTICAL / BOTH
Size 5 sec / 10 sec
Format H.264 (1920 x 1080)
Inhaltsverzeichnis
