Vivitar ViviCam 8300s Bedienungsanleitung

User’s Manual >>

EN-1

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference

that may cause undesired operation.

Note:

This equipment has been tested and found to comply with the limits for

Class B digital devices, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with Class B limits in Subpart B

of Part 15 of the FCC rules. Do not make any changes or modifications to

the equipment unless otherwise specified in the manual. If such changes or

modifications should be made, you could be required to stop operation of

the equipment.

Digital Camera >>

EN-2

TRADEMARK INFORMATION

Microsoft®and Windows®are U.S. registered trademarks of Microsoft

Corporation.

Pentium®is a registered trademark of Intel Corporation.

Macintosh is a trademark of Apple Computer, Inc.

SDTM is a trademark.

Other names and products may be trademarks or registered trademarks

of their respective owners.

READ THIS FIRST

Notice:

Product design and specifications are subject to change without notice.

This includes primary product specifications, software, software drivers,

and user’s manual. This User Manual is a general reference guide for

the product.

The product and accessories that come with your ViviCam 8300s may be

different from those described in this manual. This is due to the fact that

different retailers often specify slightly different product inclusions and

accessories to suit their market requirements, customer demographics,

and geographical preferences. Products very often vary between

retailers especially with accessories such as batteries, chargers, AC

adapters, memory cards, cables, carrying cases/pouches, and language

support. Occasionally a retailer will specify a unique product color,

appearance, and internal memory capacity. Contact your dealer for

precise product definition and included accessories.

The illustrations in this manual are for the purpose of explanation and

may differ from the actual design of your ViviCam 8300s.

The manufacturer assumes no liability for any errors or discrepancies in

this user manual.

For driver updates, refer to our website.

User’s Manual >>

EN-3

Safety Instructions

Read and understand all Warnings and Cautions before using this product.

WARNING

If foreign objects or water have entered the ViviCam 8300s, turn

the power OFF and remove the battery and the AC power adapter.

Continued use in this state might cause fire or electric shock.

Consult the store of purchase.

If the ViviCam 8300s has fallen or its case has been damaged, turn

the power OFF and remove the battery and the AC power adapter.

Continued use in this state might cause fire or electric shock.

Consult the store of purchase.

Do not disassemble, change or repair the ViviCam 8300s.

This might cause fire or electric shock. For repair or internal

inspection, ask the store of purchase.

Use the supplied AC power adapter only with the indicated

power supply voltage.

Use with any other power supply voltage might cause fire or electric shock.

Do not use the ViviCam 8300s in areas near water.

This might cause fire or electric shock. Take special care during

rain, snow, on the beach, or near the shore.

Do not place the ViviCam 8300s on inclined or unstable surfaces.

This might cause the ViviCam 8300s to fall or tilt over, causing injury.

Keep the battery out of the reach of children.

Swallowing battery might cause poisoning. If the battery is

accidentally swallowed, immediately consult a physician.

Do not use the ViviCam 8300s while you are walking, driving

or riding a vehicle.

This might cause you to fall over or result in traffic accident.

Digital Camera >>

EN-4

CAUTION

Insert the battery paying careful attention to the polarity (+ or

–) of the terminals.

Inserting the battery with its polarities inverted might cause fire

and injury, or damage to the surrounding areas due to the battery

rupturing or leaking.

Do not fire the flash close to anyone’s eyes.

This might cause damage to the person’s eyesight.

Do not subject the LCD monitor to impact.

This might damage the glass on the screen or cause the internal

fluid to leak. If the internal fluid enters your eyes or comes into

contact with your body or clothes, rinse with fresh water. If the

internal fluid has entered your eyes, consult a physician to receive treatment.

The ViviCam 8300s is a precision instrument. Do not drop it,

strike it or use excessive force when handling the ViviCam 8300s.

This might cause damage to the ViviCam 8300s.

Do not use the ViviCam 8300s in humid, steamy, smoky, or dusty places.

This might cause fire or electric shock.

Do not remove the battery immediately after long period of

continuous use.

The battery becomes hot during use. Touching a hot battery

might cause burns.

Do not wrap the ViviCam 8300s or place it in cloth or blankets.

This might cause heat to build up and deform the case, resulting

in fire. Use the ViviCam 8300s in a well-ventilated place.

Do not leave the ViviCam 8300s in places where the temperature

may rise significantly, such as inside a car.

This might adversely affect the case or the parts inside, resulting in fire.

Before you move the ViviCam 8300s, disconnect cords and cables.

Failure to do this might damage cords and cables, resulting in fire

and electric shock.

User’s Manual >>

EN-5

Notes on Battery Usage

When you use the battery, carefully read and strictly observe the Safety

Instructions and the notes described below:

Use only the specified battery (1050mAh, 3.7V).

Avoid using battery in extremely cold environments as low temperatures

can shorten the battery life and reduce ViviCam 8300s performance.

When you are using the new rechargeable battery or rechargeable

battery that has not been used for an extended period of time (the

battery that passed the expiry date is an exception) might affect the

number of images that can be captured. Therefore, to maximize its

performance and lifetime, we recommend that you fully charge the battery

and discharge it for at least one complete cycle before use.

The battery may feel warm after long period of continuous use of the

ViviCam 8300s or the flash. This is normal and not a malfunction.

The ViviCam 8300s may feel warm after long period of continuous use.

This is normal and not a malfunction.

If the battery is not to be used for a long period of time, remove it from

the ViviCam 8300s to prevent leakage or corrosion.

If the battery is not to be used for a long period of time, store it after no

battery power left. If the battery is stored for a long time in a fully charged

state, its performance may be impaired.

Always keep the battery terminals in a clean state.

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

WARNING: Handling the USB cable on this product may expose you to lead,a

chemical known to the State of California to cause birth defects or otherreproductive

harm. Wash hands after handling.

Digital Camera >>

EN-6

CONTENTS

8 INTRODUCTION

8 Overview

10 Package Contents

11 GETTING TO KNOW THE

ViviCam 8300s

11 Front View

12 Rear View

14 Mode dial

15 Status LED Indicator

16 LCD Monitor Icons

19 GETTING STARTED

1 9 Attaching the ViviCam 8300s

Strap

20 Inserting and Removing

the Battery (Optional

Accessory)

21 Charging the Battery

22 Using an AC Power Adapter

(Optional Accessory)

22 Inserting and Removing an

SD Card (Optional Accessory)

23 Turning the Power On/Off

24 Setting the Date and Time

25 Choosing the Display Language

2 6 Formatting an SD Memory Card

27 Setting Image Resolution

and Quality

29 PHOTOGRAPHY MODE

29 [ ] Auto Mode

31 Using the Optical Zoom

32 Using the Digital Zoom

33 Setting the Flash

35 Setting the Focus

36 Setting the Self-timer

37 Exposure Compensation/

Backlight Correction

38 [P] Program (Automatic

Exposure) Photography Mode

39 [Tv] Shutter Speed Priority

Photography Mode

40 [Av] Aperture Priority Mode

41 [M] Manual Mode

42 Setting the Scene Mode

44 Setting the Panorama Mode

45 [ ] Movie Mode

46 PLAYBACK MODE

46 Playing Back Still Images

47 Playing Back Video Clips

48 Playing Back Still Images/

Video Clips on a TV

49 Attaching Voice Memos

50 Thumbnail Display

51 Zoom Playback

52 Slideshow Display

User’s Manual >>

EN-7

53 Protecting Images

55 [ ] Deleting Images

57 Resizing an Image (Resize)

58 Compressing an Image

(Quality Change)

59 MENU OPTIONS

59 Photography Menu

(Capture tab)

62 Photography Menu

(Function tab)

64 Video Menu (Capture tab)

65 Video Menu (Function tab)

66 PlaybackMenu

68 Setup Menu (Basic tab)

70 Setup Menu (Custom tab)

71 TRANSFERRING RECORDED

IMAGES AND VIDEOS TO

YOUR COMPUTER

72 Step 1: Installing the USB

Driver

7 3 Step 2: Connecting the ViviCam

8300s to Your Computer

74 Step 3: Downloading

Images and Video Files

75 CONNECTING THE ViviCam

8300s DIRECTLY TO THE

PRINTER FOR PRINTING I-

MAGES(PICTBRIDGEFUNCTION)

77 EDITING SOFTWARE

INSTALLATION

77 Installing Photo Explorer

77 Installing Photo Express

78 Installing Cool 360

79 Installing Acrobat Reader

79 Using The User’s Manual

81 ViviCam 8300s SPECIFICA-

TIONS

82 TROUBLESHOOTING

Digital Camera >>

EN-8

INTRODUCTION

Overview

Congratulations on your purchase of the ViviCam 8300s.

Capturing high-quality digital images is fast and easy with this state-of-the-

art smart camera. Equipped with a 8.1 Mega pixels CCD, this ViviCam 8300s

is capable of capturing images with a resolution of up to 3296 x 2472 pixels.

Other cool features provided by the ViviCam 8300s include the following:

LCD monitor - 2.5" LTPS TFT color LCD monitor makes it easy to

frame your subject when capturing images. It also

displays the images you have captured.

Optical zoom - The 3x optical lens allows you to capture telephoto

and wide-angle images.

Digital zoom - 4x digital zoom in conjunction with the 3x optical

zoom permit zoom photography of up to 12 times.

Captured images may be reviewed and a selected

portion of an image may be enlarged up to 4x.

Flexible flash settings - You may adjust the flash setting according to your

lighting environment.

Focus mode - Images can be captured with the distance to the

subject set by auto focus, macro or infinity.

Self-timer mode - The self-timer may set to 10 seconds or 2 seconds.

Capture mode - You may capture different images including single, a

series of 3 images using auto-exposure bracketing,

and 3 images continuously.

User’s Manual >>

EN-9

Recording media - 32 MB internal memory (25.9 MB for image storage).

External memory supports SD card up to 1 GB.

TV and PC connection - You may view your images on a television monitor

or a computer using the USB or A/V cables.

Scene mode- You may select a previously set recording mode for

the following situations: Auto, Panorama,

Landscape, Candlelight, Text, Sunset, Sunrise,

Splash water, and Firework.

Movie mode - In addition to still-images, you may capture video

clips with audio (voice).

Voice memo - You may annotate your images with a 30 second

voice memo. Images may be voice-annotated at the

time of capture, or during playback.

Thumbnail display - Display your images in sets of nine on the LCD

monitor for quick selection of an particular image.

Digital Camera >>

EN-10

Package Contents

Carefully unpack your kit box and ensure that you have the following items:

Digital Camera

A/V cable

USB cable

User’s manual

Software CD-ROM

Camera strap

Camera pouch

Optional Accessories:

SD memory card

AC power adapter

Rechargeable lithium-ion battery

Battery charger

Accessories may vary by retailer.

Inhaltsverzeichnis

Andere Vivitar Digitalkamera Handbücher

Vivitar

Vivitar Vivicam 7028 Bedienungsanleitung

Vivitar

Vivitar ViviCam V8426v2 for 10MP Bedienungsanleitung

Vivitar

Vivitar Vivicam 3540 Bedienungsanleitung

Vivitar

Vivitar VIVICAM 620HD Bedienungsanleitung

Vivitar

Vivitar ViviCam X122 Bedienungsanleitung

Vivitar

Vivitar ViviCam 3100 Bedienungsanleitung

Vivitar

Vivitar ViviCam S029 Bedienungsanleitung

Vivitar

Vivitar Vivicam 3785 Bedienungsanleitung

Vivitar

Vivitar ViviCam X137 Bedienungsanleitung

Vivitar

Vivitar Vivicam 2000 Bedienungsanleitung

Vivitar

Vivitar Z360ix Bedienungsanleitung

Vivitar

Vivitar ViviCam 7399 ELITE Bedienungsanleitung

Vivitar

Vivitar Vivicam 5150s Bedienungsanleitung

Vivitar

Vivitar Vivicam 3555T Bedienungsanleitung

Vivitar

Vivitar VS1527 Bedienungsanleitung

Vivitar

Vivitar ViviCam F126v2 Bedienungsanleitung

Vivitar

Vivitar ViviCam 8324 Bedienungsanleitung

Vivitar

Vivitar ViviCam F530 Bedienungsanleitung

Vivitar

Vivitar Vivicam 5105s Bedienungsanleitung

Vivitar

Vivitar ViviCam 8018 Bedienungsanleitung

Vivitar

Vivitar ViviCam V8426 Bedienungsanleitung

Vivitar

Vivitar Vivicam 5399 Bedienungsanleitung

Vivitar

Vivitar Vivicam 3640 Bedienungsanleitung

Vivitar

Vivitar ViviCam X025 Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Canon

Canon EOS ELAN7 Bedienungsanleitung