Vivo MOUNT-E-UP65A Bedienungsanleitung
Motorized TV Stand with Remote Control
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-e-up65a
SKU: MOUNT-E-UP65A
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
PACKAGE CONTENTS
TOOLS NEEDED
110lbs
(50kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x1)
Motorized
Column
B(x1)
Plate Support
Bracket
C(x2)
Shelf Bracket
Support
M-F (x4)
M5/8 Washer
M-G (x8)
5mm
Spacer
M-E (x4)
M8x50
M-A (x4)
M5x14
M-B (x4)
M6x14
M-C (x4)
M6x30
M-D (x4)
M8x30
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
Drill
D(x1)
Shelf Bracket
E(x1)
TV Plate
F (x2)
VESA Bracket
G(x1)
Control Unit
H(x1)
AC Adapter
I(x1)
Adapter Mount
J(x16)
ST5.5x16
Screw
M-H (x8)
15mm
Spacer
K(x2)
ST4.2x20
Screw
L(x12)
M6x12 Screw
M(x4)
M10x20 Bolt
N(x4)
M10 Nut
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
O (x1)
4mm Allen Wrench
P (x1)
6mm Allen Wrench
Q (x1)
Wrench
R (x1)
Power Cable
S (x1)
Remote
3
ASSEMBLY STEPS
STEP 1
Before starting, ensure that the TV will have at least 2” (50mm) or room on each side and in
front. The space between the TV and top shelf should be no less than 3/8” (10mm). Connect
the cable from the Motorized Column (A) to the Control Unit (G).
STEP 3
Assemble the Plate Support Bracket (B) to the Motorized
Column (A) using M6x12 Screws (L) and tighten with the
4mm Allen Wrench (O).
STEP 2
Place the AC Adapter (H) into the Adapter Mount (I), first fitting the cable through the open slot, then
connect to the Control Unit (G). Plug the Power Cable (R) into the AC Adapter (H).
G
4
STEP 4
Mount the Shelf Bracket Supports (C) to the sides of the Plate Support
Bracket (B) using M6x12 Screws (L) and tighten with the 4mm Allen
Wrench (O). The Shelf Bracket Supports (C) should be mounted to the
maximum height to ease the assembly process, and can be adjusted
later to match the cabinet and TV height.
STEP 5
Assemble the Shelf Bracket (D) to the top of the Shelf Bracket Supports (C) using M6x12 Screws (L)
and tighten with the 4mm Allen Wrench (O).
STEP 6
Plug the Power Cable (R) into a wall outlet. To ensure the Remote (S) is paired, use a pencil or other
thin tool to press the small button on the end of the Control Unit (G), then aer hearing a beep, press
the SET button on the Remote (S). The Control Unit (G) will beep for about 10 seconds. Once the
beeping stops, press the UP button on the Remote (S) to fully raise the Motorized Column (A).
Assemble the TV Plate (E) to the Plate Support Bracket (B) using M10x20 Bolts (M) and M10 Nuts (N),
making sure the M10 Nuts (N) are on the front of the TV plate (E). Tighten using the 6mm Allen Wrench
(P) and Wrench (Q).
B
C
RG
A
BE
5
STEP 8
Mount the Control Unit (G) using ST4.2x20 Screws (K), and the AC Adapter (H) with Adapter
Mount (I) using ST5.5x16 Screws (J). Tighten with a Phillips screwdriver.
STEP 7
Place the Motorized Column (A), Control Unit (G), and AC Adapter (H) with Adapter Mount (I) in
the cabinet at the desired locations. Mark all mounting hole locations with a pencil. Remove the
Motorized Column (A) and other components, drill 5/8” (15mm) deep holes using a 1/8” (3mm) drill
bit, then mount the Motorized Column (A) in the cabinet using ST5.5x16 Screws (J). Tighten with a
Phillips screwdriver.
STEP 9
Place the cabinet shelf on top of the Shelf Bracket (D). Making sure the shelf is aligned with
the rest of the cabinet, mark mounting hole locations with a pencil and remove the shelf.
Drill 5/8” (15mm) deep holes using a 1/8” (3mm) drill bit, then mount the shelf to the Shelf
Bracket (D) using ST5.5x16 Screws (J). Tighten with a Phillips screwdriver.
A
G
H
I
D
6
STEP 10
Mount the VESA Brackets (F) to the back of the TV, making sure the round holes are up and
the slots are down. Use the 14mm Bolts (M-A, M-B) with M5/M8 Washers (M-F) for smaller
TVs. Use the 30mm Bolts (M-C, M-D) or 50mm Bolts (M-E) with M5/M8 Washers (M-F) and
Spacers (M-G, M-H) for large or curved TVs. Tighten with a Phillips screwdriver.
STEP 11
Hang the VESA Brackets (F) with TV over the top of the TV Plate (E), and tighten the security
screws underneath using a Phillips screwdriver.
F
F
E
7
STEP 12
Adjust the height of the Shelf Bracket Supports (C) if necessary for the cabinet to close with the TV
lowered. The Mount is now ready for operation.
Please refer to the Controller User Guide for operating instructions.
C
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
LAST UPDATED: 03/26/2021
REV1.0
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
Inhaltsverzeichnis
Andere Vivo TV-Halterung Handbücher
Vivo
Vivo VESA STAND-VAD1B Bedienungsanleitung
Vivo
Vivo MOUNT-VW11 Bedienungsanleitung
Vivo
Vivo MOUNT-MM01B Bedienungsanleitung
Vivo
Vivo STAND-V155C Bedienungsanleitung
Vivo
Vivo STAND-TV65F Bedienungsanleitung
Vivo
Vivo STAND-V012 Bedienungsanleitung
Vivo
Vivo MOUNT-VW120M Bedienungsanleitung
Vivo
Vivo Mount-E-FD55 Bedienungsanleitung
Vivo
Vivo E-FD55 Bedienungsanleitung
Vivo
Vivo STAND-VAD1B Bedienungsanleitung
Vivo
Vivo STAND-V001S Bedienungsanleitung
Vivo
Vivo STAND-TV00Y Bedienungsanleitung
Vivo
Vivo MOUNT-V001G Bedienungsanleitung
Vivo
Vivo STAND-TV70B Bedienungsanleitung
Vivo
Vivo MOUNT-VW70F Bedienungsanleitung
Vivo
Vivo STAND TV00J Bedienungsanleitung
Vivo
Vivo MOUNT-VW100T Bedienungsanleitung
Vivo
Vivo MOUNT-M-MM070A Bedienungsanleitung
Vivo
Vivo MOUNT-VESA01 Bedienungsanleitung
Vivo
Vivo STAND-TV03E Bedienungsanleitung
