Vivotek AM-221 Bedienungsanleitung

IP Surveillance

Installation Guide

VIVOTEK Fixed Dome Series

Extender Conduit Box

Using AM-712 conduit box,

AP-FXC-0200 PoE Extender,

and compatible accessories

Rev. 1.2

Corresponding part number:

AM-712: 909004720G

AM-221: 900014800G

AM-118: 900014600G

AM-522: 900020200G

NEW_VIEW_7

n152.4

n9 DP1-3X

0.1

1.6

1.7

n3.5

n33 DP3

71.3

n 150.6

0.1 L1.5-2X

n6 L14-4X

71.3

NPT 3/4"-3X

16.5

n4.5-3X

M3X0.5 DP5-5X

88.9

106

138

AM-712 Conduit Box Mechanical Drawings

Revision History:

* Rev. 1.0: Initial Release

* Rev. 1.1: Added FD8367-TV, FD8167-T, and FE8180 as the supported models.

* Rev. 1.2: Added corresponding part numbers, and FD8169 as supported model.

Package Contents

Item No.

AM-712

conduit

box

Conduit box 1

Base plate 1

611021100G cross, countersunk head, M3x6,nickel plated, nylok

(for securing base plate to box)

610006600G pan head, M3x5, nickel plated (for securing PoE

extender)

SPG-PF26-G top and side conduit plugs 3

English

Physical Description - Use

100m 100m 100m

PoE switch

AP-FXC-0200

PoE Extender

12341 2 3 4

LA N

Po E

UPL I NK

Po E

OFF

4xFE PoE + 1xFE Switch

UPLINK

POWER ON

* The NPT (National Pipe Taper) or PT pipes with male threads are user-supplied.

** The last conduit box does not need to contain a PoE extender.

Item No.

Screw

pack

M3x6 round head w/ washer (nickel and nylok) 7mm; (for securing

dome cameras to the base plate)

#6-32 L6 truss head (nickel and nylok) 8mm (for direct installation to a

junction box)

Anchors 3

Pan head M4x25, zinc-plated, self-tapping screws (for direct installation

to ceiling)

M3x6 pan washer head 2

Alignment notch

For countersunk head screws

Physical Description - Bottom

Physical Description - Top

For attaching to juction box

For 3/4” conduits

For NPT or PT pipe

English

Installation

Above are the locations of different groups of mounting holes for matching different

cameras:

Hole

Type

Applicable Cameras Screw No. of screws

AFD8137HV/ FD8154V / FD8164V

M3x6 round head

BFD8137H / FD8154 / FD8164 / FD8169 3

CFD8131V / FD8133V/ FD8134V 3

DFD8131 / FD8133 / FD8134 2

EFD8151V / FD8152V 2

FFD8136 / FD8166 2

GFE8180 M3x6 pan washer

head 2

HFD8167 / FD8167-T / FD8138-H

M3x6 round head 3

IFD8367-V / FD8367-TV / FD8338-HV 3

Mounting Hole Denitions

Compatible VIVOTEK Cameras

Fixed Dome series FD8136 / FD8166 / FD8151V / FD8131/31V/33/33V/34/34V

/ FD8137H/37HV / FD8164/64V / FD8154/54V / FD8152V /

FD8167 / FD8138-H / FD8367-V / FD8367-TV / FD8167-T /

FE8180 / FD8338-HV / FD8169

You may also refer to VIVOTEK's website for the list of supported models. Support for other models can

be available through time.

NOTE:

1. The AM-522 is necessary when installing the AM-712 mounting cap to VIVOTEK's

standard mounting options such as AM-212 (wall mount bracket) and AM-221

(gooseneck).

The AM-522 features the mounting option for NPT pipes only.

2. Route cables before you secure the accessories to a wall.

3. For details on the cable connections with each camera, please refer to their Quick

Installation Guide.

For cabling and conguration details with each network camera, please refer to their

documentation.

English

Conguration - Pendant Pipe

3/4” pendent pipe

AM-712

AM-522 adapter

AM-118 pendant head

3/4” female adapter

Note: The 3/4" female adapter and pendant pipes are separately purchased.

Conguration - Gooseneck

AM-712

AM-522 adapter

AM-221 gooseneck

NOTE:

The following mount types do not apply to PT pipes.

NOTE:

When installing the mounting cap, take note that the orientation of the mounting cap can

affect the camera's shooting direction. You may need to disconnect the conduit box from

the NPT pipe, rotate, and re-install it for the best orientation.

Conguration - Wall Mount

AM-712

AM-522 adapter

AM-212 Wall-mount bracket

English

Refer to the matching table on page 4 for the mounting hole information for your camera.

III-1. Installing Camera to Conduit Box

1. Remove the base plate from the bottom of the conduit box.

2. You can route cables through other accessories before you install cameras to the base

plate.

3. Orient and install the camera to the base plate (to the side with printed characters).

4. Connect cables to the camera.

5. Install the base plate to the conduit box.

6. Proceed with initial setup such as enabling network access, focus tuning, or zooming.

When done, secure the outer dome cover.

The A Screw Holes: FD8154V / FD8137HV / FD8164V

Some installation samples are shown below:

NOTE:

Orient the camera so that cables coming out from the camera can pass through the

cabling hole on the base plate.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Vivotek Sicherheitskamera Handbücher

Vivotek

Vivotek FD8163 Bedienungsanleitung

Vivotek

Vivotek 4X-SD8111 Bedienungsanleitung

Vivotek

Vivotek IP8330 Bedienungsanleitung

Vivotek

Vivotek FD8182-T Bedienungsanleitung

Vivotek

Vivotek FD8133 Bedienungsanleitung

Vivotek

Vivotek IP7161 Bedienungsanleitung

Vivotek

Vivotek Supreme IP8151 Bedienungsanleitung

Vivotek

Vivotek PD8136 Bedienungsanleitung

Vivotek

Vivotek IB8360-W Bedienungsanleitung

Vivotek

Vivotek SUPREME IP9172-LPC Bedienungsanleitung

Vivotek

Vivotek FD8166 Bedienungsanleitung

Vivotek

Vivotek Supreme MS9390-HV Bedienungsanleitung

Vivotek

Vivotek Supreme SD9363 Bedienungsanleitung

Vivotek

Vivotek FD816B-HF2 Bedienungsanleitung

Vivotek

Vivotek FE9380-HV Bedienungsanleitung

Vivotek

Vivotek FE8172 Bedienungsanleitung

Vivotek

Vivotek IB9365-HT Bedienungsanleitung

Vivotek

Vivotek FD8166 Bedienungsanleitung

Vivotek

Vivotek SD8333-M Bedienungsanleitung

Vivotek

Vivotek Vortex FD639 Bedienungsanleitung

Vivotek

Vivotek IP6114 Bedienungsanleitung

Vivotek

Vivotek IP8166 Bedienungsanleitung

Vivotek

Vivotek SC8131 Bedienungsanleitung

Vivotek

Vivotek MD8562 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung