Vixen Horns VXS9200B Bedienungsanleitung

VXS9200B

INSTALLATION GUIDE

PAGE 1 of 3

BEFORE BEGINNING YOUR INSTALLATION

Read through the whole instruction guide before getting started with the installation. Professional installation is

recommended for this product.

CONTENTS

8-Sound Dual Snail Horn (Black)

8-switch Wired Control Box

Power Box

Mounting Hardware

SAFETY INSTRUCTIONS

Avoid dismantling this horn’s electrical elements.

Avoid setting up any parts of the horn where there is a risk of falling off or risk of coming in contact with water.

Avoid reaching out to touch or pick up any fallen or water submerged parts.

Set the horn up for use only in areas with adequate ventilation.

Avoid sounding the air horn when in close range to your ear(s) or the ear(s) of others.

Make sure your battery ground is detached before getting your installation started.

Employ equipment for eye protection during drill operations.

The specific voltage requirement for this horn is 12 volt DC, therefore installation must be done to a DC power

source of 12 volts.

VXS9200B

INSTALLATION GUIDE

PAGE 2 of 3

MOUNTING

HORNS

Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of

the vehicle so as to provide a firm platform which will help protect the horn from damage due to excessive

shaking. Do not attach the horn to any plastic or other flexible material.

Use the provided mounting hardware to attach both horns to the main bracket.

Using the main bracket as a guide estimate and mark the positions for the two holes and then perforate to

size using a drill.

Use the provided mounting hardware to attach the bracket to the vehicle.

CONTROL BOX

Find a mounting location for the control box in which you will have access to the buttons.

Mount the unit on the location chosen using the double-sided tape.

IMPORTANT: If the control box is going to be installed on a handle bar, use the included handle bar bracket

and four small screws.

POWER BOX

The length of the wire that connects the power box with the control box is 3 Feet (36 inches), find a suitable

mounting location for the power box that is within that length from the control box’s mounting location.

Mount the unit on the location chosen using two provided screws.

VXS9200B

INSTALLATION GUIDE

PAGE 3 of 3

ELECTRICAL CONNECTIONS

Each horn has two BLACK wires, one attached to one of the screws in the bracket (-) and one attached to the

housing (+).

On the Power Box:

HORN 1: Connect the RED (+) wire to the wire that is attach to the housing then connect the WHITE (-) wire

to the wire that is attached to the screw in the bracket.

HORN 2: Connect the RED (+) wire to the wire that is attach to the housing then connect the BLUE (-) wire to

the wire that is attached to the screw in the bracket.

On the opposite side of the Power Box connect the RED (+) wire to the positive (+) terminal of the battery or

alternator. WARNING: We highly recommend that you use a 20A fuse (not provided) to assure that the circuit

remains safe and will not be damaged by excess current.

Connect the BLACK (-) wire to ground, this can be an unpainted metal on the chassis of your vehicle.

OPERATION

To start using the dual snail horn set the vehicle's ignition to the ON position.

The 8 buttons in the control box are momentary switches, each one will produce a different sound while is

pressed. Available sounds: FAST / TOGGLE / MI / RE / DO / ALL-ON / TURN BACK / TELOLET

To stop sound’s playback release the button.

Inhaltsverzeichnis

Andere Vixen Horns Horn Handbücher

Vixen Horns

Vixen Horns VXO4830AB/3318XB Bedienungsanleitung

Vixen Horns

Vixen Horns VXS-1050AR Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330B/5901B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8705/3118B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8315/4114B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8350/1167C2 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8315/4114 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8350B/4318B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8580/3418C Bedienungsanleitung

Vixen Horns

Vixen Horns VXS-2245AR Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330/3118 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8210/3311B2 Handbuch

Vixen Horns

Vixen Horns VXO8805/3311B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8715/3118B Bedienungsanleitung

Vixen Horns

Vixen Horns VXS7920 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8410/4124C Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8715/3311 Bedienungsanleitung

Vixen Horns

Vixen Horns VXH4124XLB Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8350/11642 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8815/3114 Bedienungsanleitung

Vixen Horns

Vixen Horns OCTOPOD Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8315/3318 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8315/3114B Bedienungsanleitung

Vixen Horns

Vixen Horns VXH3114LB Bedienungsanleitung

Beliebte Horn Handbücher anderer Marken

Elk Products

Elk Products 45 Bedienungsanleitung

Valcom

Valcom V-1050C Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock DB3 Series Bedienungsanleitung

Altec Lansing

Altec Lansing 811B HF HORN Bedienungsanleitung

RF Elements

RF Elements UltraHorn CC Series Bedienungsanleitung

Edwards Signaling

Edwards Signaling 869DSTR-G1 Series Montageanleitung

Valcom

Valcom V-1030C Bedienungsanleitung

Valcom

Valcom VIP-130AL-SA Bedienungsanleitung

Electro-Voice

Electro-Voice HPT94 Bedienungsanleitung

Toa

Toa LE-M124 Bedienungsanleitung

EAW

EAW MR-102B Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR MH30 Bedienungsanleitung

Pequod

Pequod TWISTER 3.1 Bedienungsanleitung

United Pacific

United Pacific 46151 Bedienungsanleitung

Wolo

Wolo OCEAN ALERT 170 Bedienungsanleitung

Altec

Altec 151A PAGING HORN Bedienungsanleitung

aidapt

aidapt VM953 Programmierhandbuch

Valcom

Valcom V-1069 Bedienungsanleitung