Vizio E320VT Bedienungsanleitung
E320VT / E370VT / E420VT – QUICK START GUIDE
EDGE LIT RAZOR LED™LCD HDTV
PACKAGE CONTENTS
1
Cleaning ClothRemote Control with
Batteries
User Manual and
Quick Start Guide
VIZIO LCD HDTV with Base
RF Adapter
USING THE REMOTE
Power/Standby: Turn the TV on or off.
Input: Change the input device.
A/V Controls: Control external device (CEC-enabled devices only).
Info: Display the Info Window.
CC: Open the Closed Captioning menu.
Menu: Display the on-screen menu.
Exit: Close the on-screen menu.
Arrow: Navigate the on-screen menu and episode guide.
OK: Select highlighted menu option.
Guide: Display the episode guide (digital channels only).
Back: Go to the previous on-screen menu options.
V Button: Launch the USB photo viewer.
Channel Up/Down: Change the channel. With each press of the button,
the channel will increase or decrease by one.
Volume Up/Down: Increase or decrease the loudness of the TV’s audio.
Mute: Turn the sound off or on. When mute is activated, the
TV’s audio is turned off.
Last: Return to the channel last viewed.
Number Pad: Use the number pad to manually enter a channel.
Dash (-): Use with number pad to manually enter a digital
sub-channel. (For example, 18-4 or 18-5.)
Wide: Switch between display modes.
Power/Standby
A/V Controls
Info
Menu
Arrow
Channel
Up/Down
Last
Number Pad
Wide
Mute
Volume
Up/Down
OK
Exit
Input
GuideBack
Dash (-)
CC
V Button
INSTALLING THE BASE
1
Place the TV screen-down on a clean, flat surface. To prevent
scratches or damage to the screen, place the TV on a soft
surface, such as carpet, rug, or blanket.
2
Place the base against the back of the TV as shown.
3
Using a philips-head screwdriver, attach the base to the TV by
inserting and tightening the 4 included screws.
4
Move the TV with attached stand into an upright position and
place on a flat, level, and stable surface.
Do not insert or tighten these screws without the
base attached.
FIRST-TIME SETUP
2
Connect the power cord to the back of the TV.
Plug the power cord into an electrical outlet.
1
Remove the battery cover by pressing gently and
pushing it away from the remote.
Insert the batteries. The +and -symbols on the batteries
must correspond to the +and -symbols inside the battery
compartment.
Replace the battery cover by gently sliding it back into place.
If you have an external antenna or a cable connection that
extends from a wall outlet, connect it to the TV with an
RF/Coaxial cable and the included RF Adapter.
4
Turn the TV on by pressing the Power/Standby button on the
remote or on the side of the TV.
The Setup App is displayed.
Initial Setup
Allow the VIZIO setup Wizard to
help you tune your channels.
Welcome
Next Exit
EXIT
3
5
Press the Up/Down Arrow buttons on the remote to highlight
your preferred language.
Press Right Arrow to go to the next screen.
6
Press the Up/Down Arrow buttons on the remote to highlight
Home.
Press Right Arrow to go to the next screen, then enter your time
zone and daylight savings information.
Initial Setup
Please select your language: English
Français
Español
Language
NextBack Select Exit
EXIT
Initial Setup
Please select your input location:
NextBack Select
Home
Retail
Mode Setting
Exit
EXIT
7
If the TV is connected to an external antenna, select Antenna, then press
Right Arrow and go to step 7.
If the TV is connected to a cable service without a set-top box (cable is
connected directly from the wall outlet) select Cable, then press Right Arrow
and go to step 7.
If the TV is connected to a cable or satellite set-top box, press the EXIT button
on the remote, then select the input to which your set-top box is connected
(HDMI, COMP, or AV).
8
Press the Up/Down Arrow buttons on the remote to highlight
Scan.
Press Right Arrow to begin the channel scan.
Wait for the channel scan to finish.
When the channel scan is complete, the first-time setup is
complete.
Initial Setup
Please select your input source:
NextBack Select
Antenna
Cable
Tuner
Exit
EXIT
Initial Setup
Please connect your cable or
antenna to the DTV/TV input
Scan
Skip Scan
Channel Scan
Next Exit
EXIT
Back Select
CONNECTING YOUR DEVICES
1
Ensure your device has one of the above ports.
Turn your device and the TV off.
Connect your devices using the connection chart on the next
page. This chart shows the most common connections. If you
would like to see additional connection options, see
Connecting
Your Devices
in the user manual.
HDMI
Component
Composite AV
VIZIO RECOMMENDS
To get the best high-resolution picture and sound on your new
VIZIO TV, connect your devices with an HDMI cable.
VIZIO High Speed HDMI Cables are manufactured to produce
the best picture on VIZIO TVs and feature:
•1080p and for full HD video and future Ultra-HD video
•Great flexibility for thin wall mounts
•Stays securely connected at sharp angles
•Limited lifetime warranty
Visit www.VIZIO.com to purchase online.
Andere Handbücher für E320VT
1
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere Vizio LCD-Fernseher Handbücher
Vizio
Vizio VW32L HDTV40A Bedienungsanleitung
Vizio
Vizio VW37L - 37" LCD TV Bedienungsanleitung
Vizio
Vizio SV421XVT - 42" LCD TV Bedienungsanleitung
Vizio
Vizio E551i-A2 Bedienungsanleitung
Vizio
Vizio VOJ320M Bedienungsanleitung
Vizio
Vizio E422VLE Bedienungsanleitung
Vizio
Vizio XVT3D554SV Bedienungsanleitung
Vizio
Vizio VO420E - 42" LCD TV Bedienungsanleitung
Vizio
Vizio Razor E261VA Bedienungsanleitung
Vizio
Vizio VA370M - 37" LCD TV Bedienungsanleitung
Vizio
Vizio HDTV30A VW32L Bedienungsanleitung
Vizio
Vizio P50 - P50 HDTV Widescreen 50-in Plasma TV Bedienungsanleitung
Vizio
Vizio VO42LFHDTV10A Bedienungsanleitung
Vizio
Vizio VX32LOM Bedienungsanleitung
Vizio
Vizio VW22L - 22" LCD TV Bedienungsanleitung
Vizio
Vizio E650i-B2 Bedienungsanleitung
Vizio
Vizio VM190XVT - XVT-Series 720p LED LCD HDTV Bedienungsanleitung
Vizio
Vizio E470VLE Bedienungsanleitung
Vizio
Vizio D24h-E1 Bedienungsanleitung
Vizio
Vizio VO370M - 37" LCD TV Bedienungsanleitung
