Vjoy C101B Bedienungsanleitung
Thank you for choosing our products.We will make every effort to your security
101B support GSM network, /C101B support CDMA network.
V3.03 updated on 2009-7-13
GPS Vehicle Tracking Device
User Manual
Vehicles IN YOUR HAND
Model: 101B/C101B
2
Table of Contents
I) Overview………………………………………………………………………………………
II) Part List ………………………………………………………………………………………
III) Installation……………………………………………………………………………………
1) Getting started
2) Install to vehicle
3) Wiring Diagram and Physical
4) Tips
IV) SMS Operation………………………………………………………………………………
1) Setting
2) SMS locating and tracking
3) Request Status
4) Listening in
5) Fuel control
6) Alarm settings
7) Geo fencing
8) Extra command
V) Locate with GOOGLE………………………………………………………………………
VI) Tracking with software ……………………………………………………………………
VII) GPRS setting……………………………………………………………………………….
VIII) Command List……………………………………………………………………………..
IX) Specifications ………………………………………………………………………………
3
I) Overview
s a car owner, you concern about safet
y
and security. If you are a busines
s
operator, you have to concern more:
productivity, customer service, employees an
d
assets.
We focus in developing and manufacture GP
S
tracking system and hardware. We would like t
o
help you accomplish these.
You will know the vehicle’s current positio
n
anywhere and anytime!
You can monitor the vehicles in 24 hours one day and 7 days a week. All the status will be report
to you including: direction, speed, running time, etc. You will get the alarm report from device as
soon as possible by cell phone, by computer, including: anti-steal, over speed, power alarm,
towing, parking, SOS.
You can set a special zone for vehicles to alert you if they are enter or leaving this zone.
You can remote control your vehicle, fuel control, talk; listening in, lock/unlock the door,
You can check all the history data which is stored in the system and export the statistics report
for mileage, alarms.
Application:
●Taxi /buses management
●Special vehicles and heavy trucks Management
●Anti-theft security system for private vehicles
●Asset management
●Rent car management
●Private car safety and security
A
4
II) Part list
NO PHOTOES NAME QTY SPEC NOTE
1Main Unit 180*53*25mm black
2GPS Antenna 15 meters waterproof
magnetic
3GSM Antenna 13 meters waterproof
4Harness &
Relay 11.5 meters 8 pin
5Microphone 1--
8N/A Manual CD 1--
III) Installation
1) Getting started
Before installation, please check all the parts in package as the part list and make sure no
part mentioned lost! If you found there’s part lost, please contact with local agent.
zStep1 SIM card
5
Use a little stick to press the SIM card button and the frame will come out. Put the SIM card inside and keep
metal side upward. Please make sure that the SMS function of the SIM card is available.
Warning: Please confirm the power is off during installation of SIM card. Or it maybe
causes damage to SIM card.
zStep 2 Assemble the antennas
Connect the GPS and GPS ANT to their plug. Keep the GPS antenna where has good condition to receive
the signals. For example, put it outdoor or near the window open to sky.
zStep 3 Power ON
User could power the unit with backup battery or extra power.
Backup battery: switch on the button on the main unit.
Extra power: support the power red (+) and black (-) 12V DC
When power is on, User could see the LED indicator blinking:
The red show GSM working; green shows GPS working.
At first, the RED will blink every second, which means it is searching the GSM network. After it
connected, it will blink every three seconds. If there's phone call, the red will be keeping lighting.
If there's GPRS date translating, it will blink very fast.
The green blinking means it got GPS signal.
zStep 4 Set master phone number
Send the command as the operation explanation to the SIM card number to set user's cell
phone as master phone number.
For example: user’s cell phone number is 138000138000. The SIM card number in device is
13900139000. User send the SMS *master=138000138000:1234# to the number
139000139000.
After that, the device is ready to work.
2) Install to vehicle
Where I should place the main unit?
User could place the main unit any plac
e
you need, for example under the seat, in th
e
trunk, or under the dash board. Ou
r
hardware is black and small size. It’s eas
y
forusertohideitinthecar.
6
Are there any special thing notices on the antenna installation?
GSM signal is fine usually, and then you could put GSM antenna the place you like. But the
GPS antenna need open to sky. So place it where as we suggested.
There are four places, please see the picture.
SOS button can save life!
User need to attach the SOS button where is easy to press. Then when he met some
emergency like car crash or robbery, he could press the button immediately. The hardware will
send out the message to the programmed numbers or server center to call for help. So please
be careful to install this button.
3) Wiring diagrams and Physical
z101B/C101B
4) Tips:
●Immobilizer installation
7
Please find out the gas control line in the vehicle. And cut off this line and connect the relay as
the wiring diagram. Please note the red line is close to the engine side and the black once close
to gas pump side.
●SMS Jammed
Sometime, too many short messages will be jammed in SIM card. So if there's no feedback.
User could call the SIM card number first to see if there's communication.
●The high building and cloudy weather will affect the GPS signal.
●When I power on the device with internal battery, I found there’s no power.
Please power the device with extra power DC12V with the battery switch on, then the battery
will recharge.After it recharge 4 hours, power it only with battery. If still no power, please contact
with local agent.
●I got many zeros when I locate the vehicle.
That means there’s no GPS signal. Please check as follow step by step.1) GPS ANT install
ready, do not connect it with GSM plug. 2) Put the GPS ATN outside and open to sky 3) Change
another GPS ATN.
IV) SMS Operation
User operates the device by text SMS to device SIM card number.
Every command has same format: begin with*, end with #, the content is English word or letters.
Please note all the commands need be typed in English and are not case sensitive.
Command format:
*Command (abbr.) =parameter1: parameter2#
Different phone number has the different authority: master number and slave number. Master
number can operate every function but slave number can not.
Some functions need the hardware support, if the command feedback is right but failed to
operate, please check the connection as the wiring diagram.
1) Setting
8
zC1 Set master tel No.
Keyword: Master Msr
Command: *master=no:password# or *msr=no:password#
Description:
This is the first step to use the device. If the user's number is 13712345678; SIM
card in the device number is 13712345670.
Example: Sending: *master=13712345678:1234# or
*msr=13712345678:1234# (default password 1234.)
zC2 Set slave tel no.
Keyword: Slave Slv
Command: *slaveX=no# or *slvX=no#
Description:
Slave numbers is designed for other users of the same car. There are three slave numbers.
Only the master phone number can set the slave number. If others number want to set the slave
number, it will get the failed feedback: The sender must be master number. For example to set
the second slave number.
Example:
Sending: *slave2=13712345672# or
*slv2=13712345672#
zC3 Set password
Keyword: Password Psd
Command: *password=old:new# or *psd= old:new #
Description:
This password is the key to communicate with device. It should have 4 numbers, default setting
is 1234.
Example:
Sending: *password=1234:5678# or
*psd= 1234:5678 #
zC4 Load default
Keyword: Default Dft
Command: *default # or *dft#
Description:
When user want to clear all the settings in the device, this command is important. Only master
number can send it.
zC5 Restart
9
Keyword: Restart
Command: * Restart # or *rst#
Description:
User could restart the device without clearing the setting with this command..
zC6 Product S/N
Keyword: Sn
Command: *sn#
Description:
Product s/n is need when user wants to use GPRS and network.
zC7 Set SMC number
Keyword: Smc
Command: * smc=no#
Description:
SMC (short message center), this number is for SMS service. User could check it with cell
phone.
2) SMS locating and tracking
zC8 Locate coordinates
Keyword: Position Pos
Command: * position# or *pos#
Description:
User sends SMS to locate the vehicle. The feedback is including coordinates, speed and a web
link. User could get the position on Google map with the coordinates. Or he could use the link
with cell phone to see the map. For more information, please refer to locate with Google.
Example:
22.572583,113.855972,0km/h.
http://www.gogps.mobi/tracker.asp?lng=113.855972&lat=22.572583&key=550
zC9 Locate address
Keyword: Position2 Pos2
Command: *position2# or *pos2#
Description:
User sends SMS to locate the vehicle. The feedback is not coordinates but address. This
function needs local agent support.
zC10 Set tracking mode
10
Keyword: Track Trk
Command: *track=n:m# or *trk=n:m#
Description:
With this command, the device could send the position information automatically. User could set
the interval as time or distance.
M=s, the interval is time, n=seconds. Min 30 seconds
M=d, interval is distance, n=meters. Min 300 meters
Example:
Command: *track=300:s# every 300 seconds, device send position back.
Command: *track=300:d# every 300 meters, device send position back.
3) Request Status
zC11 Request Status
Keyword: Status Sts
Command: * status # or *sts#
Description:
User could use this command to request the status of the device.Power:12.45 V, GPS:OK/no
signal, ACC: Open/close, Door: Open/close, GSM Signal: Strong/weak.
4) Listening in
zC12 set the listening-in number
Keyword: Listen Lsn
Command: * listen=no:password# or * lsn=no:password#
Description:
When user wants to listening in the vehicle, he could use master number to dial the device
number. Second way is to use this command. Any phone numbers is available and after the
device get the command, it will call to this number directly.
For example:
Sending: * listen=5553467:1234# users could listen in with number 5553467.
5) Fuel Control
zC13 Fuel control
Keyword: Fuel
Command: *fuel=n #
Description:
This is command can help user to stop or disable the engine. When he doesn’t want anyone to
drive the car, or when he wants to stop the running car, he can use this command. The device
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Vjoy GPS Handbücher
