VMP ER-1 Bedienungsanleitung

VIDEO MOUNT PRODUCTS

Instruction Sheet For:

ER-1, ER-148, ER-184

For more information, please contact us at:

345 Log Canoe Circle, Stevensville, Maryland 21666

Toll Free: 877.281.2169 Phone: 410.643.6390 Fax: 410.643.6615

www.videomount.com

ER-1

3

1B

5

24

7 6

8

1A

ITEM

NO.

DESCRIPTION

QTY.

1A

Left Support

1

1B

Right Support

1

2

Plate

1

3

Support Plate

1

4

Triangle Plate

2

5

Screw #10 -

32UNC

32

6

Screw 1/4" -

20UNC*L1/2"

20

7

Nut 1/4" -

20UNC

16

8

Plastic Washer

32

4

5

1A

1B

2

3

6

7

6

8

*** ER-148 ***

NO. Part Name QTY.

1A Left Support 1

1B Right Support 1

2 Base Plate 1

3 Top Plate 1

4 Triangle Plate 2

5 Screw 10#-32UNFx5/8" 32

6 Cross Screw 1/4"-20UNCx1/2" 16

7 Nut 1/4"-20UNC 12

8 Plastic Washer 4.6x 11.2xT0.8 32

7

1A 1B

6

4B

7

8

3

5

9

*** ER-184 ***

NO. PART NAME QTY.

1A Left Support 1

1B Right Support 1

3 Base Plate 1

4B Top Plate 1

5 Triangle Plate 2

6 Screw 10#-32UNFx1/2'' 32

7 Cross Screw 1/4"-20UNCx1/2" 20

8 Nut 1/4"-20UNC 16

9 Plastic Washer 4.6x 11.2xT0.8 32

Step 1

Before starting lay out all parts to your mount and match them to

the parts list provided. Verify that you have all your parts before at-

tempting to assemble the mount.

Note: For the example images the ER-184 is shown.

Step 2

Attach the triangle plates for ER-1 and ER-148, for ER-184 to

the base plate for ER-1 and ER-148, for ER-184 using ¼” – 20

screws for ER-1 and ER-148, for ER-184 and nuts for ER-1

and ER-148, for ER-184.

Step 3

Attach the left and right supports to the triangle plates

for ER-1 and ER-148, for ER-184 using ¼” – 20 screws for

ER-1 and ER-148, for ER-184 and nuts for ER-1 and ER-148,

for ER-184.

Step 4

Attach the support plate for ER-1 and ER-148, for ER-184 to

the left and right supports using ¼” – 20 screws for ER-1

and ER-148, for ER-184 and nuts for ER-1 and ER-148, for

ER-184.

Please verify that all nuts and screws are securely tightened.

Step 2: Attaching the triangle plates

Step 3 : Attaching the left and

right supports

2

3

WARNING: The installer of these products must verify that the mount-

ing surface, ceiling or wall, will safely support the combined weight

of all attached equipment and hardware. Video Mount roducts will

not be held liable for the improper use or installation of its products.

Enjoy Your Mount!

7

4

6

5

Step 4 : Attaching the support plate

1A

5

6

4

8

3

VIDEO MOUNT PRODUCTS

7

1B

7

87

4B

1A 1B

7

68

7

Dieses Handbuch passt für folgende Modelle

2

Andere VMP Rack & Stand Handbücher

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung