Electrical Ratings
• 4 x AA high-capacity Alkaline batteries (purchased separatedly)
Setup Guide
Using the Touchscreen Keypad
Wake up Touchscreen Keypad
1. Factory Resetting
(1) Insert the batteries
(2) Within 15 seconds, enter 1234 + “ ” . Once completed, the lock reboots. You should
hear a long beeping sound coming from the buzzer.
NOTE: DO NOT power off until operation is restored after factory reset.
2. Turn on Bluetooth for your iOS device (iOS 10.3 or later)
3. Download and open the LinkWise app, Tap “+ Add Device” icon on the mainpage and follow
the on-screen directions to complete setup.
4. You will be asked to scan the setup code or manually enter the setup code. The setup code
is a QR code located on the interior cover.
5. Select the device from the accessory list. Each accessory has a unique identification code,
e.g., VOCOlinc-XXX-XXXXXX. Make sure the last 6 characters of the identification code is
consistent with the last 6 characters of MAC on the top of the battery holder.
6. If the screen shows “Couldn’t add VOCOlinc-XXX-XXXXXX”, please factory reset the product
and then manually enter the setup code. DO NOT lose the setup code.
7. You can name your device and refer to it when speaking to Siri. For example, if you name
your device “Front Door”, you may wake up Siri and say “Lock/unlock my front door”.
8. The use of a HomeKit-enabled accessory need the follow permissions:
Settings > iCloud > iCloud Drive > Turn On
Settings > iCloud > Keychain > Turn On
Settings > Privacy > HomeKit > LinkWise > Turn On
Press & hold the “ ” key until you hear the beeping sound or see the backlight turned on.
Fast Locking
Wake up Keypad and Tap “ ” key。
Secure Locking
After 4 incorrect code attempts, the backlight will be turned off and the keypad will temporarily
shut down for 60 seconds.
