Vollrath Lettuce King I 400N Bedienungsanleitung

Item No. 2350026-1 en Rev 07/14

ENGLISH

Operator’s Manual

Lettuce King®I

400N, 401N, 402NC, 403N

Lettuce King®IV

4400N

Thank you for purchasing this Vollrath Food Processing Equipment. Before operating the equipment, read and familiarize yourself with

the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and

packaging. Use this packaging to ship the equipment if repairs are needed.

Drum Ring shown sold separately.

OperatOr’sManual

ENGLISH

Safety PrecautionS

To ensure safe operation, read the following statements and understand

their meaning. This manual contains safety precautions which are

explained below. Please read carefully.

WARNING

Warning is used to indicate the presence of a hazard that can cause

severe personal injury, death, or substantial property damage if the

warning is ignored.

CAUTION

Caution is used to indicate the presence of a hazard that will or can

cause minor personal injury or property damage if the caution is

ignored.

NOTE

Note is used to notify people of installation, operation, or maintenance

information that is important but not hazard-related.

For Your Safety!

These precautions should be followed at all times. Failure to follow

these precautions could result in injury to yourself and others or

damage the equipment.

To reduce risk of injury or damage to the equipment:

Check equipment before each use to insure the equipment is clean.

Check for broken, nicked or dull blades and if found, replace the blade

assembly.

Check to insure that the pusher head sits down completely on the rubber

bumpers.

If necessary, lubricate guide rods using a light coating of mineral oil, Petro

Gel, or food grade lubricant. DO NOT USE COOKING OIL AS IT WILL

BECOME STICKY AND MAY PERMANENTLY DAMAGE THE PUSHER

HEAD BEARINGS

function and PurPoSe

Intended for cutting, dicing and wedging vegetables and fruits.

featureS and controlS

Figure 1. Features and Controls Lettuce King I.

Figure 2. Features and Controls Lettuce King IV.

ENGLISH

OperatOr’sManual

AGUIDE RODS. Guides and align the pusher head onto the blade

set.

BHANDLE. Used to lower and raise the pusher head.

CLEGS. Supports the equipment.

DPUSHER HEAD ASSEMBLY. Made up of the guides and the

pusher head block (and the handle for tabletop models).

EBUMPERS. Cushions the stop of the pusher head.

FSAFETY LOCK HANDLE. Used to secure the pusher head block

in the up position.

G BLADE ASSEMBLY. Houses the blades. Specically sized to

match the corresponding pusher head block.

HBASE ASSEMBLY. Holds the guide rods and parts of the

equipment.

ILEG SCREWS. Holds the legs in place.

JLOCKING PIN. Secures the pusher head to the handle. Secures

the handle assembly to the base. Secures the safety lock to the

base.

KSAFETY LOCK ARM. Used to secure the pusher head block in

the up position.

unPacking the equiPment and initial SetuP

Carefully remove crating or packaging materials from the equipment. Dispose

of all packaging ,materials in an environmentally responsible manner.

Leg installation Lettuce King I:

1. Use the screws (A) and washers (B) to install legs (C) tightening with

wrench (D). See Figure 3.

Figure 3. Legs, Hardware and Tool for the Lettuce King I.

2. Secure legs (C) to base (E) using screws (A) and washers (B). See

Figure 4.

Figure 4. Mounting the Legs on the Lettuce King I.

Leg installation Lettuce King IV:

1. Use the capscrews (A) and rubber washers (B) to install legs (C). See

Figure 5.

BAB

Figure 5. Legs and Hardware for the Lettuce King IV.

2. Set legs (C) into the holes in the base assembly (D) so the angled part of

the leg faces outward. See Figure 5.

3. Secure legs (C) to base assembly (D) using capscrews (A) and rubber

washers (B). See Figure 5.

4. Tighten capscrews (A) slowly and rotate the legs slightly so that the end

of the capscrew (A) enters the notch (E) in the leg (C). See Figure 5.

OperatOr’sManual

ENGLISH

LETTER PART NUMBER DESCRIPTION

A060 RUBBER FOOT (OLD STYLE)

303 RUBBER FOOT, DEEP (NEW STYLE)

B 0655 RUBBER SEAL

C 414 SCREW FIL. HEAD., 1/4-20 X 3/4”

D 415 SCREW, HEX HEAD., 1/4-20 X 7/8”

E 420 BLADE BLOCK

F 424 BLADE BLOCK PIN

G 426 LEG CASTING, FRONT / REAR

H 427 BLADE BLOCK SCREW, 1/4-20 X 2”

I 4422R SET SCREW, SQ. HEAD., 1/4-20 X 3/8”

379062 PUSHER HEAD 3/16” - (Item 400N) INCLUDES:

4 (0.88 LONG) SPACERS, 74 (0.93 LONG) SPACERS, 38 FINGERS, 2 RETAINING RODS, 4 NUTS

483 PUSHER HEAD 1/4” - (Item 403N) INCLUDES:

56 SPACERS, 29 FINGERS, 2 RETAINING RODS, 4 NUTS

482 PUSHER HEAD 3/8” - (Item 402NC) INCLUDES:

38 SPACERS, 20 FINGERS, 2 RETAINING RODS, 4 NUTS

452 PUSHER HEAD 3/4” - (Item 401N) INCLUDES:

20 SPACERS, 11 FINGERS, 2 RETAINING RODS, 4 NUTS

K 453 PUSHER HEAD LOCKING COLLAR - INCLDS. COLLAR & SCREW

L 454 PUSHER HEAD PIVOT ROD

M 455 PUSHER HEAD HANDLE - INCLDS. HANDLE ROD & 2 PLASTIC GRIPS

N 456 PUSHER HEAD SIDE ARM - RIGHT HAND

O 457 PUSHER HEAD SIDE ARM - LEFT HAND

P 468 BASE ASSEMBLY (CASTING)

Q 490 NYLON WASHER

R 506 PUSHER HEAD BUMPER

S 519 ACORN NUT, 1/4”

435 BLADE ASSEMBLY 3/16” - (Item 400N) INCLUDES:

37 BLADES, 2 BLOCKS, 2 PINS, 2 SHIELDS

485 BLADE ASSEMBLY 1/4” - (Item 403N) INCLUDES:

28 BLADES, 2 BLOCKS, 2 PINS, 2 SHIELDS

484C BLADE ASSEMBLY 3/8” - (Item 402NC) INCLUDES:

19 BLADES, 2 BLOCKS, 2 PINS, 2 SHIELDS

434 BLADE ASSEMBLY 3/4” - (Item 401N) INCLUDES:

10 BLADES, 2 BLOCKS, 2 PINS, 2 SHIELDS

U N/A BLADE SHIELD - PART OF BLADE ASSEMBLY

NOT SHOWN 4425 LETTUCE CUTTER BRUSH

SPare PartS liSt - lettuce king i

ENGLISH

OperatOr’sManual

SPare PartS liSt - lettuce king i

Figure 6. Spare Parts for Lettuce King I

OperatOr’sManual

ENGLISH

SPare PartS liSt - lettuce king iv

LETTER PART NUMBER DESCRIPTION

A 0658 Rubber Seal

B 303 Rubber Foot

C 305 “O” ring

D 379017 Handle Bracket

E 379018 Leg (new style - do not intermix with old style)

F 379019 Screw, Stainless, Hex, 3/8-24 x 1”

G 379020 Spacer

H850083 Guide Rod (also part of 4401)

I 4402 Blade Block (also part of blade assy 4408)

J 4403 Blade Pin (also part of blade assy 4408)

K 4404 Pusher Head

L 4405 Head Guide

M 4406 Screw, Hex, 1/4-20 x 4 1/2”

N 4407 Screw, Hex, 1/4-20 x 1 3/8”

O 4409 LEG (old style - do not intermix with new style)

P 4411 Pull Pin with ring, short, 1 1/4”

Q 4412R Pull Pin with ring, long 1 3/4”

R 4413 Operating Arm Linkage

S 4414R Operating Handle

T 4416 Safety Pivot Base

U 4417 Safety Latch Assembly

V 4424 Screw, Hex, 1/4-20 x 1/2”

W 4427 Screw, Phillips, 1/4-20 x 1 1/4”

X N/A Plastic Cap (also part of 4417)

Y N/A Aluminum Stop (also part of 4417)

Z N/A Safety Latch (also part of 4417)

AA N/A Screw, Hex, 1/4-20 x 1” (also part of 4417)

BB N/A Blade Shield (part of blade assy 4408)

CC 4408 Blade Assembly (includes. 2 complete blade assy’s w/ shields)

DD N/A Single Blade, 1/2” x 9-3/16” (packed 12 per carton) (part of blade assy 4408)

EE 4401 Main frame with guide rods

FF N/A Head Guide Link (Not Shown) discontinued, refer to “D”)

NOT SHOWN 4425 Lettuce Cutter Brush

NOT SHOWN 2900 Drum Ring (Sold Separately)

ENGLISH

OperatOr’sManual

SPare PartS liSt - lettuce king iv

Figure 7. Spare Parts for Lettuce King IV.

Andere Handbücher für Lettuce King I 400N

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Vollrath Küchengerät Handbücher

Vollrath

Vollrath 606N Bedienungsanleitung

Vollrath

Vollrath Mirage 59500 Bedienungsanleitung

Vollrath

Vollrath 46120 Bedienungsanleitung

Vollrath

Vollrath Redco InstaCut 3.5 15001 Bedienungsanleitung

Vollrath

Vollrath Cube King 1811 Bedienungsanleitung

Vollrath

Vollrath 40794 Bedienungsanleitung

Vollrath

Vollrath JW30PA Bedienungsanleitung

Vollrath

Vollrath SLM330E/S Bedienungsanleitung

Vollrath

Vollrath Wedgemaster II 700-1 Bedienungsanleitung

Vollrath

Vollrath VP16 Bedienungsanleitung

Vollrath

Vollrath SLR7009/N Bedienungsanleitung

Vollrath

Vollrath SLP300/S Bedienungsanleitung

Vollrath

Vollrath SLM250/S Bedienungsanleitung

Vollrath

Vollrath Onion King 500N Bedienungsanleitung

Vollrath

Vollrath 40831 VP12 Bedienungsanleitung

Vollrath

Vollrath Mirage 59300 Bedienungsanleitung

Vollrath

Vollrath Cayenne POA8002 Bedienungsanleitung

Vollrath

Vollrath Onion King 500N Bedienungsanleitung

Vollrath

Vollrath 7217210 Bedienungsanleitung

Vollrath

Vollrath SLR7912/N Bedienungsanleitung

Vollrath

Vollrath Cube King 1811 Bedienungsanleitung

Vollrath

Vollrath 40789 Bedienungsanleitung

Vollrath

Vollrath REDCO 55010 Bedienungsanleitung

Vollrath

Vollrath REDCO WEDGEMASTER II Handbuch

Beliebte Küchengerät Handbücher anderer Marken

Tayama

Tayama TYG-35AF Bedienungsanleitung

AEG

AEG 43172V-MN Bedienungsanleitung

REBER

REBER Professional 40 Benutzerhandbuch

North American

North American BB12482G / TR-F-04-B-NCT-1 Bedienungsanleitung

Presto

Presto fountain popper Bedienungsanleitung

Westmark

Westmark 1035 2260 Bedienungsanleitung

Zanussi

Zanussi ZCG64396XA Bedienungsanleitung

HOFFEN

HOFFEN SM-9302M Bedienungsanleitung

Philips

Philips HD3133 Bedienungsanleitung

Ronco

Ronco Beef Jerky Bedienungsanleitung

Hendi

Hendi 470411 Bedienungsanleitung

Livoo

Livoo MEN386 Bedienungsanleitung

croydon

croydon WR-10313-700 Bedienungsanleitung

Chefman

Chefman RJ43-SQ Series Bedienungsanleitung

Vacmaster

Vacmaster VP680 Bedienungsanleitung

Jetmaster

Jetmaster 900HG Bedienungsanleitung

Küppersbusch

Küppersbusch EEH 610.0 Kurzanleitung zur Einrichtung

HURAKAN

HURAKAN HKN-F10 Bedienungsanleitung