Vulcan-Hart RE-3 Bedienungsanleitung
Vulcan catering
equipment (ptY)ltD
VULCAN ELECTRIC SOLID TOP OVEN RANGE
MODEL: RE-3 - SOLID TOP OVEN RANGE
RE-3T - SOLID RANGE TOP ONLY ON CABINET BASE
Index:
General Data 2
Owners Responsibility 3
Authorised Vulcan Catering Equipment
Branches And Dealers 3
Parts Ordering / Service Information 4
Prior To Installation Of Equipment 4
Cleaning Process 4
Trouble Shooting 5
Installation 5
Wiring Diagrams 6
Use Of Controls 9
Operation 10
Optional 10
Preventative maintenance 11
Safety 12
RE-3 : SOLID TOP RANGE MODEL RE-3T : SOLID TOP
RANGE TOP ONLY
[ 2 ] VULCAN ELECTRIC BOILING / SOLID TABLE
Vulcan catering equipment (ptY)ltD
GENERAL DATA:
MANUFACTURER: Vulcan Catering Equipment (Pty) Ltd
P O Box 60188 15 Newclare Road
Langlaagte 2102 Industria 2093
Johannesburg Johannesburg
South Africa South Africa
Web Site www.vulcan.co.za
MODEL / SERIAL NUMBER: RE 3 143/33/7891 onwards
RE - 3T Without oven
HOTPLATES: RE-3 Three 4kW hotplates
640 x 330 each controlled by a
three heat switch.
RE - 3T Three 4kW hotplates
640 x 330mm,
each controlled by a
three heat switch.
PROTECTION: RE – 3T 3 x 32 Amp line circuit breakers.
CONDUIT ENTRY: 25mm conduit (male) at rear right hand side of unit
ELECTRICAL LOADING: L1 = 4kW]
L2 = 4kW] Total load 12kW
L3 = 4kW]
ELECTRICAL SUPPLY: 400V, 3N (400 Volts, 3 Phase, 4 Wire, 50Hz).
NET MASS: 215Kg
[ 3 ] Ranges RE-3 and RE-3-T
Vulcan catering equipment (ptY)ltD
REV3-11-2011 / VFM29
OWNERS RESPONSIBILITY
It is the owners responsibility to:
• ToensurethattheRE3andRE3Tareregularlyandproperlymaintained.
• Ensurethatallsafetydevicesandwarningsignsareintheiroriginallocation.
• Allowonlytrainedpersonneltooperate,cleanandmaintaintheequipment.
• Replacewarningsignsormanualswhennecessary.ContactanauthorisedVulcan
Catering Equipment Dealer for replacement.
AUTHORISED VULCAN CATERING EQUIPMENT BRANCHES AND DEALERS:
Vulcan Toll Free Number 0860 Vulcan / 885226
Johannesburg Branch Ofce (011) 249 - 8500
Johannesburg Service Department (011) 249 - 8578 / 8582
Johannesburg Spares Department (011) 249 - 8600
Johannesburg Standby Tel. Number (082) 446 - 7095 After Hours
Cape Town Branch Ofce
CapeTownOfce Tel.Number (021) 510-5010
Durban Branch Ofce
DurbanBranchOfce Tel.Number (031) 569-7800
Port Elizabeth Ofce
PortElizabethOfce Tel.Number (041) 453-5177
East London Branch Ofce
EastLondonOfce Tel.Number (043) 722-2883
Botswana Dealer Ofce
BotswanaDealerOfce Tel.Number (+267) 395-2228
Namibia Dealer Ofce
NamibiaDealerOfce Tel.Number (+264) 61251-708
[ 4 ] VULCAN ELECTRIC BOILING / SOLID TABLE
Vulcan catering equipment (ptY)ltD
PARTS ORDERING / SERVICE INFORMATION:
Parts / spares orders must be placed directly with your local branch / distributor. To help
speed up your order, we require the following information:
1) Model / Serial Number
2) Voltage
3) Item Part Number
4) Quantity Required
The serial number data plate is sited on the front bottom right hand corner of the unit.
Service information may be obtained by calling your local branch / distributor.
When calling, please have the following information available:
1) Model / Serial Number
2) Voltage
3) Nature of Service Problem
PRIOR TO THE INSTALLATION OF EQUIPMENT:
• Readtheoperatingmanualtomakesurethattheinstallationmeetsalltherequirements
asspeciedwithintheOperatingandInstallationmanualprovidedwithyourunit.
CLEANING PROCESS:
Please note
• Alwaysswitchoffunitandcircuitbreakersatmainpowersupplyafteruse,during
maintenance and cleaning.
• Cleantheunitwhileitisstillwarm,itiseasiertoremovedirt.
• Useonlywarmsoapywaterandasoftclothwhencleaning.
• Neverusesteelwool,sodaoranyotherharshabrasivesforcleaning.
• Donothosetheunitdown.
• Removecrumbtrayandclean.
[ 5 ] Ranges RE-3 and RE-3-T
Vulcan catering equipment (ptY)ltD
REV3-11-2011 / VFM29
TROUBLE SHOOTING:
COMPLAINT POSSIBLE CAUSE REMEDY
Not switching on.
• Mainisolatoroff.
• Maincircuitbreakeroff.
• Switchisolatoron.
• Switchmaincircuitbreakeron.
INSTALLATION:
1) Before leaving the factory, the unit has been fully assembled and undergone
naltests.
2) Unitmustbeinstalledonareproofoor.Iftheoorisofwood,arrangementsmust
bemadetocomplywithlocalreregulations.
3) Remove plastic material protecting the stainless steel panels.
4) Positiontheunit.Checkwithaspiritlevelanduseooradjustersonlegstobringto
the correct level if necessary.
5) Anelectricalisolatorswitchmustbeincorporatedinthesupplylineandttedadjacent
to the unit.
6) Before connecting the electrical supply to the unit, check voltage details correspond
with the data plate positioned at the front bottom right hand corner of the unit.
7) For access to main terminals behind right hand control panel, remove the three
Screwsxingthesidepanelandthetwoscrewsxingthepaneltothedoorframe.
Connect the 3 phase wires to circuit breakers, neutral wire to neutral block and the
earth wire to earth connection. Ensure that the unit is effectively earthed.
8) NOTE: Before operating the boiling top, switch hotplates to low position (1) to burn
off manufacturing residues. During this operation, smoke may be emitted from
the unit.
9) The unit is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge unless they
have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
10) Children should be supervised to ensure that they do not play with the appliance.
PLEASE NOTE
11) The installation of the equipment must be done by a qualied registered
technician all in compliance with statutory Health and Safety Regulations.
[ 6 ] VULCAN ELECTRIC BOILING / SOLID TABLE
Vulcan catering equipment (ptY)ltD
WIRING DIAGRAM VULCAN RE3 RANGE AND OVEN
18KW, 400V, 3N
Item No Stores Ref.No Description
A1 - A3 3010 - 28 Circuit Breaker 40amp
B1 3076 - 01 Terminal block
B2 – B4 3076 - 15 Terminal block
H1 3051 - 01 Amber pilot light
R1-R2-R3 3017 - 09 Outer element 2kW
R4-R5-R6 3017 - 08 Inner element 2kW
R7 – R9 3017 - 10 Oven element 2kW
S1-S2-S3 3067 - 37 EGO switch 3 heat
T1 3077 - 40 Thermostat 3 pole 50º C - 300ºC
[ 7 ] Ranges RE-3 and RE-3-T
Vulcan catering equipment (ptY)ltD
REV3-11-2011 / VFM29
Filter Fry Switch
WIRING DIAGRAM RE 3T 12kW, 400V, 3N
Item No Stores Ref.No Description
A1 - A3 3010 – 39 Circuit Breaker 32amp
B1 3076 - 01 Terminal block
R1 – R3 3017 - 09 Solid plate 2kW, element outer
R4 – R6 3017 - 08 Solid plate 2kW, element inner
S1 – S3 3067 - 37 EGO switch 3 heat
[ 8 ] VULCAN ELECTRIC BOILING / SOLID TABLE
Vulcan catering equipment (ptY)ltD
LINE DRAWING INDICATING SERVICE AND SPARE PARTS
ORDERING DATA
Item No Stores Ref.No Description
1 3067 - 37 EGO switch 3 heat
2 Switch knob 3 heat
3 3067 - 39 Energy regulator
4 3077 - 94 Energy regulator knob
5 3051 - 01 Pilot light amber
6 3010 - 28 Circuit breaker 40 amp
7 3017 - 09 Solid plate 2kW element outer
8 3017 - 08 Solid plate 2kW element inner
9 Top plate – fully assembled with elements
Backing plates and channels
10 3035 – 05 Hot plates 2kW 220mm diameter
[ 9 ] Ranges RE-3 and RE-3-T
Vulcan catering equipment (ptY)ltD
REV3-11-2011 / VFM29
Spilage tray
R / 3 Heat Switch
Circuit Breakers
Data Plate
R / H Indicator Lamp
L / H 3 Heat Switch
L / H Indicator Lamp
Centre 3 Heat Switch
Centre Indicator Lamp
LINE DRAWING INDICATING CONTROLS RE 3T
MK 5 AND MK 6 ELECTRIC RANGE WITH BOILING TOP / RE - 3
Spilage tray
R / 3 Heat Switch
Circuit Breakers
Data Plate
Oven Indicator Lamp
Oven Thermostat
L / H 3 Heat Switch
Centre 3 Heat Switch
[ 10 ] VULCAN ELECTRIC BOILING / SOLID TABLE
Vulcan catering equipment (ptY)ltD
OPERATION:
HOTPLATE: The 640 x 330mm hotplates are controlled by 3 heat switches.
Position 0: Off
Position 1: Low 1000 watts
Position 2: Medium 2000 watts
Position 3: High 4000 watts
The loading of these plates is evenly distributed i.e. - the heat is uniform over the
complete surface of the plate.
The 220mm diameter round hotplates are controlled by an energy regulator which gives
linear heating from low (1) to high (3).
All cooking utensils should have machined at bases to give maximum heat
transference.
CLEANING:
Please see page 4 of this manual for cleaning process.
OPTIONAL:
Range Mounted Salamander
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Vulcan-Hart Reichweite Handbücher
Vulcan-Hart
Vulcan-Hart VS2 SERIES Bedienungsanleitung
Vulcan-Hart
Vulcan-Hart GH60 Bedienungsanleitung
Vulcan-Hart
Vulcan-Hart Vulcan VSP100 Leitfaden
Vulcan-Hart
Vulcan-Hart EG160 Bedienungsanleitung
Vulcan-Hart
Vulcan-Hart G260L Bedienungsanleitung
Vulcan-Hart
Vulcan-Hart VR Bedienungsanleitung
Vulcan-Hart
Vulcan-Hart GHX45 Bedienungsanleitung
Vulcan-Hart
Vulcan-Hart VGM36 Bedienungsanleitung
Vulcan-Hart
Vulcan-Hart 260L Bedienungsanleitung
Vulcan-Hart
Vulcan-Hart E36LC SERIES Bedienungsanleitung
Vulcan-Hart
Vulcan-Hart G260 Bedienungsanleitung
Vulcan-Hart
Vulcan-Hart G36 Bedienungsanleitung
Vulcan-Hart
Vulcan-Hart MG12 ML-52549 Bedienungsanleitung
Vulcan-Hart
Vulcan-Hart V2BG24 Bedienungsanleitung
Vulcan-Hart
Vulcan-Hart Econoline 160L77R Bauanleitung
Vulcan-Hart
Vulcan-Hart VG24 Bedienungsanleitung
Vulcan-Hart
Vulcan-Hart 148L Bedienungsanleitung
Vulcan-Hart
Vulcan-Hart GH30 Bedienungsanleitung
Vulcan-Hart
Vulcan-Hart MG12 Bedienungsanleitung
Vulcan-Hart
Vulcan-Hart E36L SERIES Bedienungsanleitung
