Wacom Intuos Pro Bedienungsanleitung

Table of Contents

ABOUT THE WACOM INTUOS PRO

GETTING STARTED WITH YOUR PEN TABLET

CONNECTING BY BLUETOOTH WIRELESS

SKETCHING ON PAPER

WACOM TABLET PROPERTIES

ON-SCREEN CONTROLS

WORKING WITH THE PEN

MULTI-TOUCH

USING THE WACOM DESKTOP CENTER

SETTING UP YOUR WORK AREA

MAPPING

TESTING THE TABLET

TROUBLESHOOTING

FUNCTIONS REFERENCE

TOGGLE FUNCTIONS REFERENCE

GLOSSARY

ORDERING

TECHNICAL SUPPORT

CARING FOR YOUR DEVICE

TRADEMARKS

About the Wacom Intuos Pro

Your Wacom Intuos Pro pen tablet gives you many different ways to express yourself creatively and to

work the way you want.

Interact with your pen tablet by using the Pro Pen 2 or by touching the tablet surface directly to

design and edit artwork, photos, and videos.

Sketch on paper attached to your tablet so that you can digitally capture your sketches.

Connect your tablet to your computer with a USB cable or work wirelessly using a Bluetooth

connection.

Change the surface texture by replacing the top sheet of your tablet with different Texture Sheets.

Test the samples included with your tablet to see which one you like best.

After installing the Wacom driver on your computer, your Wacom Intuos Pro functions as an input device

for your Windows or Mac operating system. Check out illustrations and information about your tablet and

learn how to set up your pen display.

Included with your Wacom Intuos Pro

When you unpack your Wacom Intuos Pro, make sure that you have the following items and accessories:

Wacom Intuos Pro tablet

Pro Pen 2

Pro Pen 2 stand

Extra pen nibs (inside the bottom of the Pro Pen 2 stand)

Pro Pen color identification rings

USB cable

Quick Start Guide

Texture Sheet sample card

If you purchased the Paper Edition, make sure you also have the following:

Wacom Paper Clip

Wacom Finetip pen

Paper for sketching

Finetip refills

Accessory case

Paper Edition Quick Start Guide

Finding more information

Intuos Pro Getting Started page of the Wacom website.

Purchase Texture Sheets and other accessories at the Wacom Store.

Review the Important Product Information, which describes safety precautions, specifications,

warranties, and the license agreement for your device, on the Wacom Desktop Center.

Locate the model number of your Wacom Intuos Pro on the back of your tablet.

Getting started with your pen tablet

To set up your pen tablet and get started, connect it to your computer and install the driver software.

The Quick Start Guide included in the box contains images that can help you to set up your pen tablet.

User Help

Help topics give you quick access to information about the features and capabilities of your pen tablet.

You can access the Help topics from Wacom Tablet Properties by clicking the ?icon or from the Wacom

Desktop Center Help menu.

Note: The User Help is common to Windows and Mac computers. Screenshots are from a Windows

computer, unless otherwise noted.

Information about your specific computer hardware, operating system, and application software is not

included. Refer to the product information provided with those products.

Connecting by Bluetooth wireless

You can work wirelessly by pairing your tablet to a computer through a Bluetooth wireless connection.

Important: Check to see if your computer has a built-in Bluetooth antenna. If not, purchase and install a

Bluetooth adapter or dongle before attempting to connect wirelessly.

Note: You can also pair to a mobile device by Bluetooth, but you can only transfer paper sketches while

connected.

Connecting to a computer or mobile device by Bluetooth wireless

1. If your tablet is currently connected to your computer by USB, disconnect the USB cable from your

computer.

The Touch Ring LED turns off and then turns back on again.

2. Open your computer or mobile device's Bluetooth menu and turn on Bluetooth.

3. Press and hold the Touch Ring center button on your tablet for three seconds.

The blue LED near the Wacom logo blinks, and the tablet is discoverable by Bluetooth.

4. In your computer or mobile device's Bluetooth menu, watch for your tablet's name to appear.

5. Select your tablet when it appears. The name is preceeded by BT.

6. Click Pair or complete the pairing per your operating system's instructions.

The blue LED lights for five seconds when your tablet is connected by Bluetooth.

7. Close your computer or mobile device's Bluetooth menu when pairing is done.

After you pair your computer and your tablet, you can switch between a Bluetooth and USB connection by

plugging and unplugging the USB cable.

Your tablet is battery-powered when you are connected by Bluetooth.

Sketching on paper

You can sketch on paper attached to your Wacom Intuos Pro with a supported inking pen so that you can

digitally capture your paper sketches. Record your sketches on the tablet while you are drawing, open the

Wacom Inkspace App so that your sketches are transferred, and then export your sketches to your

computer to work on in your preferred applications.

Installing the Wacom Inkspace App so you can access your sketches

Important: Install the Wacom Inkspace App before creating your first paper sketch so you can access

your digital sketches.

1. To install the Wacom Inkspace App on your computer, go to the Getting Started page and select

your operating system. To install the Wacom Inkspace App on your mobile device, install it from

your preferred app store.

2. Follow the prompts to set up your device.

3. Log in with your Wacom ID when prompted or create one if you do not have one yet.

Note: If you install the Wacom Inkspace App on multiple computers or mobile devices and log in

with your Wacom ID, your sketches sync across all installations of the Wacom Inkspace App.

Which pen should I use?

Use an inking pen, such as the Wacom Finetip pen included with the Paper Edition or the Wacom

Ballpoint pen, to sketch on paper on your tablet.

When you want to switch back to interacting directly with your pen on the tablet surface in tablet

mode, use the Wacom Intuos Pro Pen 2 or other supported pen.

Note: If the Wacom Intuos Pro Pen 2 comes close to the active area, the tablet automatically saves your

current sketch and switches out of paper sketching to tablet mode. The +in the Touch Ring disappears.

Hold your inking pen above the tablet surface to switch back to paper sketching.

Tip: Store your Wacom Intuos Pro Pen 2 in the pen stand or pen case away from the tablet while you are

paper sketching.

Wacom Tablet Properties

Use Wacom Tablet Properties to customize your pen tablet or tools. When you open Tablet Properties,

icons for all connected tablets and all tools that have been used on the tablet are displayed in the Tool

list, as well as a Touch icon for tablets with touch. All settings apply to the selected tablet or pen display.

To customize your device, make changes to the controls available on the tabs for ExpressKeys, Display

Toggle, and other features. Changes will take effect immediately.

Tool Tips are available for most Tablet Properties items. Position the screen cursor over an item and let it

rest there. The appropriate Tool Tip will pop up in a few moments.

The above screenshot is for descriptive purposes; it may not match your screen.

Tablet Properties features:

The Device, Tool, and Application icons show your settings for those items.

Click Functions to customize the ExpressKey and Touch Ring settings.

Display Toggle options are available on multiple monitor systems.

Click Touch to customize your touch settings.

Click the other Tool icons to customize those settings. A tool icon appears after you have

used that tool.

Default returns the selected tab to its default settings.

About displays the software version and diagnostic information.

Options displays Advanced settings.

The ?icon displays the Help topics for the selected tab.

Notes:

Wacom Tablet Properties will not launch unless a supported tablet or pen display is connected to

the computer.

If you have only an Intuos connected, you will not see the Device and Tool rows in Tablet

Properties.

Settings can only be viewed or changed for an attached tablet or pen display.

The Application list is optional. It is not necessary to select or add applications in order to

customize your pen tablet tool(s).

On-Screen Controls

Wacom On-Screen Controls allow you to create a set of up to eight pen tablet or pen display functions,

called a Screen Key panel, that will appear on your screen. Select a function from the Screen Key panel

by tapping the corresponding key with your pen or mouse, or with your finger if your device has touch

functionality.

To create a new Screen Key panel, or to edit, duplicate, or delete an existing panel:

1. Open Wacom Tablet Properties.

2. Click Functions in the Tools list.

3. Click the On-Screen Controls tab. The Edit buttons at the bottom left provide the following options

for Screen Key panels, from left to right:

New Edit Duplicate Delete

4. Click the appropriate button for the desired function. A dialog titled New Panel opens for a new

Screen Key panel. For an existing panel, the dialog shows the panel's name.

5. Enter your preferences for a new Screen Key, or edit an existing one, and click OK. The new or

edited panel will appear in the Panels list. For more information, see Customizing On-Screen

Controls.

Note: The default layout for a Screen Key panel is a 1 x 8 vertical strip, with one key initially

assigned to Settings. The rest of the keys will be disabled until you choose settings for them.

On the Screen Key panels:

To keep the panel open, click the Push Pin icon.

To open Wacom Tablet Properties to the On-Screen Controls tab from the panel, click the Wrench

icon.

The above screenshot is for descriptive purposes; it may not match your screen.

Inhaltsverzeichnis

Andere Wacom Grafiktablett Handbücher

Wacom

Wacom DTF-521 series Montageanleitung

Wacom

Wacom BAMBOO FUN PEN AND TOUCH Bedienungsanleitung

Wacom

Wacom Cintiq 21UX Bedienungsanleitung

Wacom

Wacom Cintiq 12 WX DTZ-1200W Bedienungsanleitung

Wacom

Wacom Cintiq Companion DTH-W1300 Bedienungsanleitung

Wacom

Wacom GRAPHIRE 3 Bedienungsanleitung

Wacom

Wacom PL-2200 Bedienungsanleitung

Wacom

Wacom DTU-1631 Bedienungsanleitung

Wacom

Wacom CINTIQ Bedienungsanleitung

Wacom

Wacom CINTIQ 15X Bedienungsanleitung

Wacom

Wacom DTU-710 Bedienungsanleitung

Wacom

Wacom STU-300B Bedienungsanleitung

Wacom

Wacom One Bedienungsanleitung

Wacom

Wacom GRAPHIRE4 - OTHER Bedienungsanleitung

Wacom

Wacom DTU-2231 Bedienungsanleitung

Wacom

Wacom DTU-1931 Bedienungsanleitung

Wacom

Wacom VOLITO 2 - Bedienungsanleitung

Wacom

Wacom DTU-2231 Bedienungsanleitung

Wacom

Wacom Cintiq 18SX Bedienungsanleitung

Wacom

Wacom DTF-521 series Fehlerbehebungshandbuch

Wacom

Wacom 12WX Bedienungsanleitung

Wacom

Wacom INTUOS 4 Bedienungsanleitung

Wacom

Wacom PTH-660-N Installationsanleitung

Wacom

Wacom DTU-1031AX Bedienungsanleitung

Beliebte Grafiktablett Handbücher anderer Marken

BandRich

BandRich WritFun W120 Bedienungsanleitung

Evolveo

Evolveo Grafico T8 Bedienungsanleitung

Kanvus

Kanvus Artist 127 Bedienungsanleitung

GAOMON

GAOMON PD156 PRO Installationsanleitung

Parblo

Parblo A610 Plus Bedienungsanleitung

Huion

Huion KD200 Bedienungsanleitung

Orbit Research

Orbit Research GRAPHITI Bedienungsanleitung

CSSN

CSSN SigniShell LCD 3x2 Bedienungsanleitung

GAOMON

GAOMON S630 Bedienungsanleitung

HP 9111A Bedienungsanleitung

Huion

Huion Kamvas Pro 13 Bedienungsanleitung

Huion

Huion KAMVAS Pro 16 4K Bedienungsanleitung

Genius

Genius 1812HR Handbuch

Huion

Huion Inspiroy 2 S Bedienungsanleitung

Huion

Huion KAMVAS GT-191 V2 Bedienungsanleitung

Bosto

Bosto 22HD Bedienungsanleitung

VisTablet

VisTablet Original 12" VT ( ) Merkblatt

Perrix

Perrix Peritab-301 Bedienungsanleitung