Wacom DTH-2242 Bedienungsanleitung
EN Quick start guide
KR 퀵스타트 가이드
TC 快速入門指南
SC 快速入门指南
DTK-2241
DTH-2242
DTH2242DTK2241QSGE.indb1DTH2242DTK2241QSGE.indb1 2012/11/2114:47:162012/11/2114:47:16
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
This Class [B] digital apparatus complies with Canadian ICES-003.
Important information
Install the driver software for correct operation.
Compatible operating systems:
Windows 8
Windows 7 (SP1 or later)
Windows Vista (SP2 or later)
Windows XP (SP3 or later)
Mac OS X v10.6.8 or later
Only the DTK-2241 supports Windows Vista (SP2 or later) and Windows XP (SP3 or later).
The following items provide help and support information for the pen display.
Help and support information Description
Quick Start Guide
(This guide)
Provides a general overview of the pen display. It includes information about connecting and
using the pen display.
User's Manual
Downloaded to your computer when the driver software is installed.
Refer to the User's Manual to learn useful information such as changing cables, using a VESA
mount, troubleshooting, etc.
Important Product Information Included on the installation CD. It contains precautions, product specifications, and other
important information. Read this information carefully before use.
To prevent scratching or damaging the pen display, replace your pen nibs regularly, and do not use felt nibs on the display.
For additional information about recycling programs for electronics please go to http://www.wacom.com/ewaste.
•
•
•
•
EN
DTH2242DTK2241QSGE.indb2DTH2242DTK2241QSGE.indb2 2012/11/2114:47:172012/11/2114:47:17
1
EN
Welcome
Dear Customer,
Thank you for your purchase of this DTK-2241/DTH-2242 interactive pen display. We appreciate your trust in us to provide you with the best
and most reliable tools possible. We hope that you will enjoy this new pen display, which was designed to help you work more effectively
and meets Wacom's exacting quality standards.
To ensure that you get the most out of your new Wacom product, please read this Quick Start Guide and browse the User's Manual. If you
cannot find the answers you need, please contact us.
Sincerely,
The Wacom team
DTH2242DTK2241QSGE.indb1DTH2242DTK2241QSGE.indb1 2012/11/2114:47:172012/11/2114:47:17
2
EN Supplied accessories
Power adapter Power cable USB cable
VGA to DVI-I cable DVI-D to DVI-I cable Installation CD Pen
Pen holder Screw
Pen tether
Some accessories are not supplied with all models.
See the User's Manual for information on replacing the pen nib.
DTH2242DTK2241QSGE.indb2DTH2242DTK2241QSGE.indb2 2012/11/2114:47:172012/11/2114:47:17
3
EN
Connecting the pen display
1 Turn off your computer.
2 Select the proper video cable for your computer. Connect to the DVI-I IN connector on the pen display, then to
the video output connector on your computer.
DTH2242DTK2241QSGE.indb3DTH2242DTK2241QSGE.indb3 2012/11/2114:47:182012/11/2114:47:18
4
EN
3 Connect the power adapter to the power connector on the pen display and to the power cable, then connect the
power cable to an AC outlet.
DTH2242DTK2241QSGE.indb4DTH2242DTK2241QSGE.indb4 2012/11/2114:47:182012/11/2114:47:18
5
EN
4 Connect the USB cable to the USB connector on the pen display and a USB connector on your computer.
5 Turn on the pen display. The power LED will light orange. When a video signal is detected, the LED turns blue.
6 Turn on your computer.
DTH2242DTK2241QSGE.indb5DTH2242DTK2241QSGE.indb5 2012/11/2114:47:182012/11/2114:47:18
6
EN Software installation
Save your work and close all open applications.
1 Insert the installation CD of the pen display. If the software installer menu is not automatically displayed, double-
click on the Install icon located on the CD.
If your computer does not have a CD/DVD drive, download the software of the pen display from www.wacom.com.
2 Click Install Tablet and follow the prompts.
Click the Important Product Information menu in the dialog to view the Important Product Information guide for the pen
display.
It includes product safety precautions, specifications, and other important information. The User's Manual is downloaded
to your computer when the driver software is installed.
DTH2242DTK2241QSGE.indb6DTH2242DTK2241QSGE.indb6 2012/11/2114:47:182012/11/2114:47:18
7
EN
Calibrating the pen display
For optimum performance, you must calibrate the pen display to align the screen cursor with the position of the pen on the
display screen. This is required to compensate for the viewing angle, and to adjust for parallax. Position the pen display at
the angle that you are going to be working from, then follow the procedure below to perform calibration.
You may want to re-calibrate whenever you significantly change your working position or viewing angle.
1 Open the Wacom Tablet control panel.
See page 12 for information on the Wacom Tablet control panel.
2 Click the Calibrate tab.
3 Click Calibrate....
4 Starting at the upper left corner, click the center of each cross mark that appears on the screen with the pen.
The position adjustment is completed when the cross marks disappear.
Click OK and close the control panel after saving the adjustment settings.
•
•
DTH2242DTK2241QSGE.indb7DTH2242DTK2241QSGE.indb7 2012/11/2114:47:182012/11/2114:47:18
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere Wacom Interaktives Whiteboard Handbücher
