WAGNER GM 4700AC Montageanleitung

AirCoat Manual Gun for Flat

and Round Jet Nozzles

Version 06/2018

B_02376

Contents

1 ABOUT THESE INSTRUCTIONS 6

1.1 Preface 6

1.2 Warnings, Notices and Symbols in these Instructions 6

1.3 Languages 7

1.4 Abbreviations 7

1.5 Terminology for the Purpose of this Manual 7

2 CORRECT USE 8

2.1 Device Type 8

2.2 Type of Use 8

2.3 For Use in Potentially Explosive Areas 8

2.4 Processible Working Materials 8

2.5 Misuse 8

3 IDENTIFICATION 9

3.1 Explosion Protection Identication 9

3.2 Identication "X" 9

3.3 Type plate 10

4 BASIC SAFETY INSTRUCTIONS 11

4.1 Safety Instructions for the Operator 11

4.1.1 Electrical Devices and Equipment 11

4.1.2 A Safe Work Environment 11

4.1.3 Personnel Qualications 12

4.2 Safety Instructions for the Personnel 12

4.2.1 Personal Safety Equipment 12

4.2.2 Safe Handling of WAGNER Spray Devices 13

4.2.3 Grounding the Unit 13

4.2.4 Product hoses 14

4.2.5 Cleaning and Flushing 15

4.2.6 Touching Hot Surfaces 15

4.2.7 Maintenance and Repair 16

4.2.8 Protective and Monitoring Equipment 16

5 DESCRIPTION 17

5.1 Components 17

5.2 Mode of Operation 17

5.3 Protective and Monitoring Equipment 17

5.4 Included Items 17

5.4.1 Version for application up to 25 MPa; 250 bar; 3625 psi 17

5.4.2 Standard equipment 17

5.5 Data 18

5.5.1 Materials of Paint-wetted Parts 18

5.5.2 Technical data 18

5.5.3 Dimensions and Connections 18

6 ASSEMBLY AND COMMISSIONING 19

6.1 Training of Assembly/Commissioning Personnel 19

6.2 Storage Conditions 19

6.3 Installation Conditions 19

6.4 Installation and Connection 20

VERSION 06/2018 ORDER NUMBER DOC2311730

6.4.1 Typical AirCoat spraying system 20

6.4.2 Ventilation of the Spray Booth 20

6.4.3 Air Supply Lines 21

6.4.4 Product supply lines 21

6.5 Grounding 21

6.6 Safety Checks 21

6.7 Lacquer Preparations 21

6.8 Commissioning 22

6.8.1 Procedure 22

6.8.2 Verifying a Safe Operational Condition 22

7 OPERATION 23

7.1 Training the Operating Personnel 23

7.2 Tasks 23

7.2.1 Starting to Spray with the AirCoat 23

7.2.2 Adjusting the Spray Pattern 24

7.3 Pressure Relief/Work Interruption 24

7.4 Changing AirCoat nozzle 25

7.4.1 Cleaning AirCoat nozzle 25

7.4.2 Eliminating Nozzle Clogging 26

8 CLEANING AND MAINTENANCE 27

8.1 Cleaning 27

8.1.1 Cleaning Personnel 27

8.1.2 Flushing and Cleaning the Spray Gun 27

8.2 Maintenance 28

8.2.1 Maintenance Personnel 28

8.2.2 Safety instructions 28

8.2.3 Safety Checks and Maintenance Intervals 29

8.2.4 Replacing the Product Hose or Air Hose 30

8.2.5 Changing or Cleaning Filter Insert 31

9 TROUBLESHOOTING AND RECTIFICATION 32

10 REPAIR WORK 33

10.1 Repair Personnel 33

10.2 Repair Notes 33

10.3 Tools 33

10.4 Replacing Parts on the Valve Rod 34

10.4.1 Replacing Valve Tappet Seals 35

10.4.2 Replacing the Rod Seal 35

10.4.3 Assembly 36

10.5 Replacing the Nozzle Seal 37

10.6 Replacing the "Air" Sealing Ring 37

10.7 Replacing the Sealing Fitting of the Round Jet Nozzle 38

10.8 Replacing the Spring Cap 38

10.9 Replacing the Filter Connection (only GM 4700AC) 39

10.9.1 Disassembly 39

10.9.2 Assembly 40

VERSION 06/2018 ORDER NUMBER DOC2311730

11 FUNCTION TEST AFTER REPAIR WORK 41

12 DISPOSAL 42

13 ACCESSORIES 43

13.1 Round jet nozzle attachment 43

13.1.1 Nozzle Inserts RXX 43

13.1.2 Nozzle screw joint, complete 43

13.2 Air caps 44

13.3 Anodized Union Nut 44

13.4 AirCoat Nozzles ACF3000 44

13.5 AirCoat Pre-atomizer Nozzles AC3000 Plus 45

13.6 Push-in Filter 45

13.7 Swivel joints 46

13.8 Hose Sets for GM 4700AC 46

13.9 Hose Sets for GM 4700AC-H 46

13.10 Nozzle Extensions 46

13.11 Miscellaneous 47

14 SPARE PARTS 49

14.1 How can spare parts be ordered? 49

14.2 Spare Parts List GM 4700AC 50

14.2.1 Assembly Aids GM 4700AC and GM 4700AC-H 52

14.3 Spare Parts List GM 4700AC-H 53

15 EU DECLARATION OF CONFORMITY 55

VERSION 06/2018 ORDER NUMBER DOC2311730

1 ABOUT THESE INSTRUCTIONS

1.1 PREFACE

The operating manual contains information about safely operating, maintaining, cleaning

and repairing the device.

The operating manual is part of the device and must be available to the operating and

service personnel.

The device may only be operated by trained personnel and in compliance with this

operating manual.

Operating and service personnel should be instructed according to the safety instructions.

This equipment can be dangerous if it is not operated according to the instructions in this

operating manual.

1.2 WARNINGS, NOTICES AND SYMBOLS IN THESE INSTRUCTIONS

Warning instructions in this manual highlight particular dangers to users and to the

device and state measures for avoiding the hazard. These warning instructions fall into the

following categories:

DANGER Immediate risk of danger.

Non-observance will result in death or serious injury.

WARNING Potential risk.

Non-observance can result in death or serious injury.

CAUTION Potentially hazardous situation.

Non-observance may result in minor injury.

NOTICE Potentially hazardous situation.

Non-observance may result in damage to property.

Notice Provides information about particular characteristics and

how to proceed.

Explanation of warning notice:

LEVEL OF DANGER

This notice warns you of a hazard!

Possible consequences of not observing the warning notice.

The measures for preventing the hazard and its consequences.

VERSION 06/2018 ORDER NUMBER DOC2311730

1.3 LANGUAGES

The operating manual is available in the following languages:

Original operating manual

Language Order no.

German 2311729

Translation of the original operating manual

Language Order no. Language Order no.

English 2311730 Danish 2369072

French 2311731 Dutch 2326027

Italian 2311732 Swedish 2391439

Spanish 2311733 Danish 2369072

Chinese 2328826 Finnish 2391441

Russian 2328825 Hungarian 2354518

Additional languages on request or at: www.wagner-group.com

1.4 ABBREVIATIONS

Order no. Order number Number of pieces

Spare part Wrench size

Marking in the spare parts lists Manual gun

Low Air AirCoat

for high-viscosity products Processing heated product (hot)

for low-viscosity products 2-component product

Position Nominal diameter

1.5 TERMINOLOGY FOR THE PURPOSE OF THIS MANUAL

Cleaning

Cleaning Manual cleaning of devices and device parts with cleaning

agent.

Flushing Internal ushing of paint-wetted parts with ushing agent.

Product pressure

generator

Pump or pressure tank.

Personnel qualications

Trained person Is instructed in the tasks assigned to him/her, the potential risks

associated with improper behavior as well as the necessary

protective devices and measures.

Electrically trained

person

Is instructed by an electrician about the tasks assigned to him/

her, the potential risks associated with improper behavior as well

as the necessary protective devices and measures.

Electrician Can assess the work assigned to him/her and detect possible

hazards based on his/her technical training, knowledge and

experience in relevant provisions.

Skilled person in

accordance with TRBS

1203

(2010/Revision 2012)

A person, who, based on his/her technical training, experience

and recent vocational experience, has sucient technical

knowledge in the areas of explosion protection, protection

from pressure hazards and electric hazards (if applicable) and

is familiar with the relevant and generally accepted rules of

technology so that he/she can inspect and assess the status of

devices and coating systems based on workplace safety.

VERSION 06/2018 ORDER NUMBER DOC2311730

2 CORRECT USE

2.1 DEVICE TYPE

Manual gun for manually coating work pieces.

GM 4700AC

GM 4700AC-H

2.2 TYPE OF USE

The automatic spray gun is suitable for atomizing liquid products, particularly coating

products, using the AirCoat process.

– Non-ignitable products.

– Products in accordance with their classication in explosion class IIB.

WAGNER explicitly prohibits any other use!

The device may only be operated under the following conditions:

Use the device only to work with the products recommended by WAGNER.

Do not deactivate safety xtures.

Use only WAGNER original spare parts and accessories.

The operating personnel must be trained on the basis of this operating manual.

2.3 FOR USE IN POTENTIALLY EXPLOSIVE AREAS

The device is suitable for use in potentially explosive areas as dened in Directive

2014/34/EU (ATEX), (see Explosion protection marking Chapter 3.1).

2.4 PROCESSIBLE WORKING MATERIALS

Top-coat lacquers, primer paints, corrosion protection, textured lacquers, lyes, staining

solvents, clear lacquers, separating agents, etc. with a solvent or water base. If you want to

spray products other than the aforementioned, please contact a WAGNER representative.

Note:

Contact your local WAGNER dealer and the lacquer manufacturer if you encounter

application problems.

2.5 MISUSE

Misuse can lead to physical injury and/or property damage!

Special attention must be paid that:

no dry coating products, e.g. powder are processed;

no food, medicine or cosmetics are processed.

It is important to note that the device's materials are not food-safe.

VERSION 06/2018 ORDER NUMBER DOC2311730

3 IDENTIFICATION

3.1 EXPLOSION PROTECTION IDENTIFICATION

As dened in the Directive 2014/34/EU (ATEX), the device is suitable for use in potentially

explosive areas.

Device type: AirCoat manual gun GM 4700AC

Manufacturer: Wagner International AG

CH-9450 Altstätten, Switzerland

II 2G X

CE European Communities

Ex Symbol for explosion protection

II Device class II

2 Category 2 (zone 1)

G Ex-atmosphere gas

X Special notice

3.2 IDENTIFICATION "X"

The maximum surface temperature corresponds to the permissible product temperature.

This and the permissible ambient temperature can be found in Chapter 5.5.2.

Safe Handling of WAGNER Spray Devices

Mechanical sparks can form if the device comes into contact with metal.

In an explosive atmosphere:

knocking or pushing metal against metal is to be avoided;

do not drop the device.

Ignition temperature of the coating product

Ensure that the ignition temperature of the coating product is above the maximum

surface temperature.

Medium supporting atomizing

To atomize the product, use only weakly oxidizing gases, e.g., air.

Cleaning

If there are deposits on the surfaces, the device may form electrostatic charges. Flames or

sparks can form during discharge.

Remove deposits from the surfaces to maintain conductivity.

Use only a damp cloth to clean the device.

VERSION 06/2018 ORDER NUMBER DOC2311730

3.3 TYPE PLATE

WARNING

SKIN INJECTION HAZARD

READ INSTRUCTION MANUAL

II 2GX

Serial-No. XXXXX

Max. p air 0.8 MPa (115 psi)

Max. p fluid see tension nut

Max. T fluid 55°C (131°F)

Wagner International AG, Altstaetten

Made in Switzerland

B_04161

Designation

1Serial number

2Maximum air inlet pressure

3Maximum product pressure see spring cap

4Maximum product temperature

(GM 4700AC = 55°C; GM 4700AC-H = 80°C - see Chapter 5.5.2)

5Warning

6 Danger of injury from injection/read operating manual

VERSION 06/2018 ORDER NUMBER DOC2311730

Andere Handbücher für GM 4700AC

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere WAGNER Spritzpistole Handbücher

WAGNER

WAGNER Plast Coat 25 Bedienungsanleitung

WAGNER

WAGNER SuperCoat 0556730W Bedienungsanleitung

WAGNER

WAGNER Paint Crew HIGH PERFORMANCE AIRLESS SPRAYER Bedienungsanleitung

WAGNER

WAGNER W 100 Bedienungsanleitung

WAGNER

WAGNER CONTROL SPRAY Bedienungsanleitung

WAGNER

WAGNER Project Sprayer Bedienungsanleitung

WAGNER

WAGNER W 860 E Bedienungsanleitung

WAGNER

WAGNER Super Finish 21 Bedienungsanleitung

WAGNER

WAGNER W 867 E Bedienungsanleitung

WAGNER

WAGNER ProjectPro 119 Bedienungsanleitung

WAGNER

WAGNER WoodPerfect W 600 Bedienungsanleitung

WAGNER

WAGNER GM 5000EA Betriebshandbuch

WAGNER

WAGNER WOOD&METAL EXTRA GRAVITY FEED Bedienungsanleitung

WAGNER

WAGNER FinishControl 5000 Bedienungsanleitung

WAGNER

WAGNER TRIM-IT Bedienungsanleitung

WAGNER

WAGNER GM 4700AC-H Betriebshandbuch

WAGNER

WAGNER PEM-TG3 Bedienungsanleitung

WAGNER

WAGNER FLEXIO 5000 Bedienungsanleitung

WAGNER

WAGNER PLAST COAT HP 30 Bedienungsanleitung

WAGNER

WAGNER Brillux PROSPRAY 39 SELECT Bedienungsanleitung

WAGNER

WAGNER Paint Crew Bedienungsanleitung

WAGNER

WAGNER Flexio 575 Bedienungsanleitung

WAGNER

WAGNER 2371053 Kurzanleitung

WAGNER

WAGNER W 95 Bedienungsanleitung

Beliebte Spritzpistole Handbücher anderer Marken

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Bedienungsanleitung

Graco

Graco 246737 Gebrauchs- und Pflegehandbuch

Binks

Binks SV100 Bedienungsanleitung

Fimco

Fimco LG-4-3-1 Bedienungsanleitung

AG SPRAY

AG SPRAY FS-ATV-25BL Bedienungsanleitung

Nordson

Nordson MicroMax 2 Bedienungsanleitung

Bonide

Bonide 051 Bedienungsanleitung

zogics

zogics Z-DAS Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-KBS-165 Bedienungsanleitung

Matrix

Matrix SG 650 Bedienungsanleitung

Anest Iwata

Anest Iwata SGA-3 Kurzanleitung

paasche

paasche VV Datenblatt

Carlisle

Carlisle DeVilbiss JGA-510 Bedienungsanleitung

Gardena

Gardena 11120 Bedienungsanleitung

Conrad

Conrad Hobby Airbrush K3 Bedienungsanleitung

wiwa

wiwa 14025 R/F Bedienungsanleitung

Graco

Graco EM 390 Bedienungsanleitung

DeVilbiss

DeVilbiss LUNA2i Bedienungsanleitung